HITACHI HYDRAULIC EXCAVATOR ■ Model Code: ZX10U-2 Engine Rated Power: 9.5 kW (12.8 HP) Operating Weight: 1 110 kg Backhoe Bucket: 0.022 m3

Versatile excavator with adjustable width for efficient use in various applications—smooth movement in confined spaces, as well as powerful operation in open areas Minimum width: 780 mm Powerful Engine Rear end swing radius: 825 mm Minimum width: 780 mm Rear end swing radius (with roll bar): 825 mm Compact Body with Short Rear End The compact short rear end design allows efficient operation even in confined spaces. Retractable Undercarriage and Blade The unit can extend up to 1 000 mm during jobs, thanks to the retractable undercarriage and blade. With maximum undercarriage extension: 1 000 mm...

Two Travel Speeds Provided Two different travel speeds are available: high (4.0 km/h) and low (2.0 km/h)— making transport of the machine through the jobsite more efficient and smooth. A new tread pattern is adopted for the rubber shoe and operating vibration suppressed. • Travel speeds: High 0 to 4.0 km/h Low 0 to 2.0 km/h Powerful, Large Exhaust Capacity Three-Cylinder Engine Packing substantial power for tough excavating jobs. • Engine rated power: 9.5 kW • Total piston displacement: 854 mL (cc) • Bucket digging force: 11.8 kN Hydraulic Pilot Control Levers Hydraulic pilot control levers provide smooth...

Wealth of convenient design features Hinged seat Fuel tank capacity of 16 Liters Neutral engine start feature Simple, Time-Saving Maintenance Hinged Seat Since the seat can be tipped forward, it can be used immediately after rainy weather, without the need for cleaning. High-Capacity Fuel Tank with Wide Inlet Thanks to the high-capacity fuel tank, operating time between refueling has been extended. Wide-Opening Cover The machine cover opens wide for easy maintenance and cleaning of the radiator. Rugged Construction and High Durability Throughout Movement Principle of HN Bush Oil circulation Oil...

HYDRAULIC SYSTEM The proven 2-pump system has been improved to make combined operations and fine control easier and smoother. Maximum oil flow ... 5.3 L/min Hydraulic Cylinders High-strength piston rods and tubes. Cylinder cushion mechanisms provided in boom raise and arm roll-in circuits to absorb shocks at stroke ends. UNDERCARRIAGE Tracks Tractor-type undercarriage. Welded track frame using carefully selected materials. Side frame extended by span cylinder. WEIGHTS AND GROUND PRESSURE Equipped with 0.81 m arm and 0.022 m3 (ISO 7451 capacity) bucket. A: General digging B: Light-duty digging

Note: The illustration shows the ZX10U-2 equipped with 0.81 m arm and 180 mm rubber shoes. The Roll Bar conforms to TOPS (ISO 12117) requirements. Unit: mm

A: Load radius B: Load point height C: Lifting capacity Metric measure Notes: 1. Rating are based on ISO 10567. 2. Lifting capacity of the ZAXIS Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. Load point is the center - line of the Bucket pivot mounting Pin on the Arm. Side: Rating over-side or 360 degrees Front: Rating over-front 4. An asterisk mark (*) indicates load limited by hydraulic capacity. ZX10U-2 Blade above Ground, 0.81 m Arm @° Rating over-side or 360 degrees Rating over-front Unit: kg

STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details. UNDERCARRIAGE • Retractable undercarriage • 180 mm rubber shoes HYDRAULIC SYSTEM • Retractable blade • Hydraulic pilot type control levers • Pilot control shut-off levers • Two-speed travel system • Piping for attachments • 0.81 m arm OPERATOR'S ROOM • TOPS roll bar • Seat belt • 12 V outlet • Work light ENGINE • Neutral engine start system FRONT ATTACHMENTS • HN bushing • 1.46 m boom OPTIONAL EQUIPMENT Optional equipment may vary by country, so please consult your Hitachi dealer...