video corpo

KS-EN167EU
1 /12Pages

KS-EN167EU

KS-EN167EU
1 /12Pages

Catalog excerpts

KS-EN167EU-1

series Short-tail-swing version HYDRAULIC EXCAVATOR ■ Engine Rated Power: 21.3 kW (28.5 HP)

 Open the catalog to page 1
KS-EN167EU-2

The Hitachi new ZAXIS-U3 Series comes with a host of refinements and tougher body for higher Boosted Productivity (Page 4) • The new engine delivers more power and higher operating efficiency. • The Eco Zone, a new functionality, enhances fuel- efficient operation. • Smooth combined operations for high production • The additional counterweight is equipped standard for higher stability when using a long or special attachment*. 'Extra piping is provided standard. Higher Durability (Page 5) • The boom cylinder guard is angled for added strength, protecting the boom cylinder from • The box-section...

 Open the catalog to page 2
KS-EN167EU-3

Rear end swing radius: Engine Rated Power: 21.3 kW(28.5 HP) Compact Body with Short Rear End The compact short rear end design allows efficient operation even in confined spaces. Enhanced Operator Comfort (Page 6) Short-stroke lever for long, continuous operation with less fatigue. Higher Maintainability (Page 7) • Centralised servicing points for simple daily Split-type hydraulic hoses can be disconnected at the base and the boom back for quick • Cooling fins at the radiator and oil cooler well avoid dirt packing and ease cleaning. Enhanced Safety (Page 7) • The neutral engine start mechanism...

 Open the catalog to page 3
KS-EN167EU-4

Boosted Productivity The new engine is teamed up with the new hydraulic system to yield more production with less fuel consumption. The Eco Zone is a new fuel-efficient feature. -^^^B The new engine complies with the Emission The new engine, combined with the new hydraulic system, boosts power and operating efficiency. The Eco Zone helps slash fuel consumption while yielding high The Auto-Idle further cuts fuel consumption: When shifting the control lever to neutral, the engine slows automatically down to idling speed after four seconds later. This reduces emissions and sound as well. The proven...

 Open the catalog to page 4
KS-EN167EU-5

Rugged Body for Tough Operation The front attachment and blade are strengthened for higher durability and productivity at tough job sites. Reinforced Front Attachment Reinforced Arm Cylinder Bracket U-3 Series Diverting external force The boom cylinder guard is angled for added strength, and the arm cylinder bracket and boom top bracket are strengthened, too. Reinforced Boom Top Bracket Reinforced Undercarriage Blade stay High-hardness rubber Steel core Force Rubber Curb The box-section blade stays are utilized to increase ruggedness for productive leveling. Each track shoe is reinforced with...

 Open the catalog to page 5
KS-EN167EU-6

Enhanced Operator Comfort The high backrest and short-stroke levers come standard to enhance operator comfort. Roof visor Shock-absorbing rubbers Operator comfort is further enhanced with an array of sophisticated designs: bright cab interior color scheme, high backrest, short-stroke levers, wrist-rest, retractable seat belt, air conditioner, AM/FM radio, and roof visor (canopy). The cab itself rests on the field-proven four shock-absorbing rubber mounts for pleasant ride. Short-Stroke Lever Wrist-rest 6

 Open the catalog to page 6
KS-EN167EU-7

Simple Maintenance and Safety Features Hitachi design expertise eases pre-start check, shortens cleaning time, and simplifies daily servicing. Simplified Maintenance The engine cover slides up and down for easy servicing in confined space. The cab floor can be tilted up to 50° for easy access to the floor bottom and engine rear. Waved fins at the radiator and oil cooler well avoid dust packing and ease The split-type hydraulic hoses can be disconnected at the base and boom back for quick replacement if a hose is punctured. Note: in daily maintenance, there is no need for cab tilting-up. When...

 Open the catalog to page 7
KS-EN167EU-8

SPECIFICATIONS ENGINE NOISE LEVEL Model Type No. of cylinders Rated power ISO 9249, net EEC 80/1269, net SAE J1349, net Gross Maximum torque Piston displacement Bore and stroke Electric system Voltage Batteries Alternator Starter motor Yanmar 3TNV88 4-cycle water-cooled, direct injection 3 21.3 kW (28.5 HP) at 2 400 min-1 (rpm) 21.3 kW (28.5 HP) at 2 400 min-1 (rpm) 21.3 kW (28.5 HP) at 2 400 min-1 (rpm) 22.0 kW (29.5 HP) at 2 400 min-1 (rpm) 106 N·m (10.8 kgf·m) at 1 000 min-1 (rpm) 1.642 L 88 mm x 90 mm 12 V 55 Ah 55 A 2.3 kW UPPERSTRUCTURE Revolving Frame Welded sturdy box construction, using...

 Open the catalog to page 8
KS-EN167EU-9

WEIGHTS AND GROUND PRESSURE SERVICE REFILL CAPACITIES Equipped with 2.47 m boom, 1.72 m arm and 0.11 m bucket (ISO heaped) rubber shoes 300 mm. 3 Cab type Operating weight Ground pressure 4-Pillars canopy 3 790 kg 34 kPa (0.35 kgf/cm2) Cab 3 960 kg 36 kPa (0.36 kgf/cm2) * (Operating weight with 0.11 m3 bucket, fully serviced, +80 kg operator ISO 6016). Fuel tank 40.0 L Engine coolant 5.0 L Engine oil 7.2 L Travel device (each side) 0.6 L Hydraulic system 56.0 L Hydraulic oil tank 32.0 L BACKHOE ATTACHMENTS Boom and arms are of welded, box-section design. 2.47 m boom, 1.72 m and 1.32 m arms are...

 Open the catalog to page 9
KS-EN167EU-10

Data in ( ) are dimensions of grouser shoe. This illustration shows the ZX38U-3 equipment with 1.32 m arm, 0.11 m3 bucket and 300 mm rubber shoes WORKING RANGES illustration shows the ZX38U-3 equipment with 1.32 m arm, 0.11 m3 bucket and 300 mm rubber shoes

 Open the catalog to page 10
KS-EN167EU-11

LIFTING CAPACITES Notes: 1. Ratings are based on ISO 10567. 2. Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point Is the center-line of the bucket pivot mounting pin on the arm. 4. An asterisk mark (*) Indicates load limited by hydraulic capacity. ZX38U-3 Canopy Version, Blade above Ground, 1.32 m Arm B: Load point height Rating over-side or 360 degrees Rating over-front ZX38U-3 Canopy Version, Blade on Ground, 1.32 m Arm ZX38U-3 Cab Version, Blade above Ground, 1.72 m Arm ZX38U-3 Cab Version, Blade on...

 Open the catalog to page 11
KS-EN167EU-12

STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details. • Water-separator for engine fuel • Radiator reserve tank • Electrical fuel feed pump • Cartridge-type engine oil filter • Fuel filter HYDRAULIC SYSTEM • Hydraulic pilot type control levers • Pilot control shut-off lever with neutral engine start system • Swing parking brake • Travel parking brake • Two-speed travel system • Auto idling system • Suction filter • Full-flow filter • Pilot filter • Boom anti-drift valve • Valve for extra piping • AM/FM radio • Window washer • Reclining seat...

 Open the catalog to page 12

All Hitachi Construction Machinery Europe catalogs and technical brochures

  1. ZX200LC-5G

    15  Pages

  2. ZX330

    15  Pages

  3. ZAXIS-7 series

    36  Pages

  4. ZX85USB-6

    20  Pages

  5. ZX85US-6

    20  Pages

  6. KL-DE136EU

    28  Pages

  7. KL-EN137EU

    24  Pages

  8. EN021EU

    5  Pages

  9. KA-EN288EU

    12  Pages

  10. EX1200-7

    13  Pages

  11. ZX145W‐6

    28  Pages

  12. ZX140W‐6

    32  Pages

  13. ZX190W-6

    32  Pages

  14. ZX210XLC-6

    24  Pages

  15. Zaxis 17U/19U

    20  Pages

  16. Zaxis 10U

    8  Pages

  17. ZX490LCH-6

    28  Pages

  18. ZAXIS350

    28  Pages

  19. ZA/iS400Lch

    16  Pages

  20. ZAXIS160

    13  Pages

  21. ZAXIS130

    28  Pages

  22. ZAXIS70

    11  Pages

  23. ZAXIS19

    16  Pages

  24. EH1700-3

    7  Pages

  25. EH3500AC-3

    9  Pages

  26. EH4000AC-3

    9  Pages

  27. EH1100-5

    9  Pages

  28. ZX26U-5

    16  Pages

  29. ZX10U-2

    8  Pages

  30. 6000SLX

    52  Pages

  31. FOREST MACHINE

    12  Pages

  32. ZX400LCH-3F

    13  Pages

  33. ZX140W-3F

    28  Pages

  34. ZX190W-3F

    15  Pages

  35. ZX470-870LCR-5G

    15  Pages

  36. ZX210W-3F

    15  Pages

  37. ZX470LCH-5G

    13  Pages

  38. ZX520LCH-3F

    17  Pages

  39. ZX670LCH-5G

    13  Pages

  40. ZX870LCH-5G

    13  Pages

  41. ZW MINI

    10  Pages

  42. ZW80

    7  Pages

  43. ZW370-G

    5  Pages

  44. ZW550-G

    5  Pages

  45. ZH210-5 Hybrid

    24  Pages

  46. EH4500-2

    7  Pages

  47. ZW550-5

    20  Pages

  48. ZW370-5

    20  Pages

  49. ZW330-5

    20  Pages

  50. ZW310-5

    20  Pages

  51. ZW310

    20  Pages

  52. ZW250-5

    20  Pages

  53. ZW220-5

    20  Pages

  54. ZW180

    20  Pages

  55. ZW140

    20  Pages

  56. ZX220W-5

    28  Pages

  57. ZX210W-3

    28  Pages

  58. ZX190W-5

    28  Pages

  59. ZX190W-3

    28  Pages

  60. ZX170W-5

    32  Pages

  61. ZX140W-5

    28  Pages

  62. EX8000-6

    7  Pages

  63. EX5600-6

    7  Pages

  64. ZX520LCH-5

    24  Pages

  65. ZX350LC-5

    24  Pages

  66. ZX290LCN-5

    24  Pages

  67. ZX250LC-5

    24  Pages

  68. ZX225USRLC-5

    24  Pages

  69. ZX225USLC-5

    24  Pages

  70. ZX160LC-5

    24  Pages

  71. ZX135US-5

    24  Pages

  72. ZX85USB-5

    28  Pages

  73. ZX55U-5

    16  Pages

  74. ZX48U-5

    16  Pages

  75. ZX29U-3

    12  Pages

  76. ZX27-3

    12  Pages

  77. ZX22U-2

    12  Pages

  78. ZX18-3

    12  Pages

  79. ZX17U-2

    8  Pages

  80. ZX16-3

    12  Pages

  81. ZW330

    12  Pages

  82. ZW180PL

    8  Pages

  83. ZW150PL

    8  Pages

  84. ZW75

    20  Pages

  85. EX1900-6

    7  Pages

  86. EX1200-6

    16  Pages

  87. ZX470LCH-5

    24  Pages

  88. ZX240N-5

    24  Pages

  89. ZX85US-5

    24  Pages

  90. ZX65USB-5

    16  Pages

  91. ZW370

    12  Pages

  92. ZX145W-3

    28  Pages

  93. ZW150

    20  Pages

  94. EH5000AC-3

    7  Pages

  95. EH4000ACII

    7  Pages

  96. EH3500ACII

    12  Pages

  97. EH1100-3

    7  Pages

  98. SCX2800-2

    6  Pages

  99. SCX2000A-2

    4  Pages

  100. SCX1500A-3

    8  Pages

  101. SCX1500-2

    4  Pages

  102. SCX1200A-3

    8  Pages

  103. SCX1200-2

    5  Pages

  104. SCX1000A-3

    8  Pages

  105. SCX900HD-2

    6  Pages

  106. SCX900-2

    5  Pages

  107. SCX800HD-2

    24  Pages

  108. SCX800-2

    24  Pages

  109. SCX700

    2  Pages

  110. SCX550

    2  Pages

  111. SCX400

    3  Pages

  112. SCX400T

    2  Pages

  113. EX3600-6

    7  Pages

  114. EX2600-6

    7  Pages

  115. ZX240N-3

    24  Pages

  116. ZX225USLC-3

    24  Pages

  117. ZX225USRLC-3

    24  Pages

  118. ZX210-3

    28  Pages

  119. ZX180LCN-3

    24  Pages

  120. ZX180LC-3

    24  Pages

  121. ZX160LC-3

    24  Pages

  122. ZX135US-3

    24  Pages

  123. ZX130LCN-3

    28  Pages

  124. ZX130-3

    28  Pages

  125. ZX110-3

    28  Pages

  126. ZX85USBLC-3

    24  Pages

  127. ZX85US-3

    24  Pages

  128. ZX70LC-3

    24  Pages

  129. ZW550

    12  Pages

  130. ZW220

    20  Pages

  131. ZW140PL

    8  Pages

  132. ZW65

    20  Pages

  133. KS-EN174EU

    24  Pages

  134. KS-EN175EU

    24  Pages

Archived catalogs

  1. ZX38U-5

    16  Pages

  2. ZX170W-3F

    15  Pages

  3. ZX33U-5

    16  Pages

  4. Ground Control

    36  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.