ZE05 Series ●High Vibration Resistance Terminal Design ①Double-Layered Spring Design Aug.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Suppresses outer vibration by increasing the contact force Double-Layered Spring ■Features 1. Space-saving (0.5 size terminal, 2mm pitch) Space-saving design that contributes to size reduction of end product 2. High Heat Resistance : up to 125℃ Suitable for use in 125℃ environments. Suppresses outer vibration by increasing the contact force 1 spring+ 2 beats= 3 contact points 3. High Vibration Resistance Can be used in vehicle environments in which intense vibration is applied. 4. Rated Current : 5A (Mono-Pole Power Supply/ 2A (All-Pole Power Supply) Suitable for use in 125℃ environments. 5. Retainer Guarantees 40N Tensile Strength 1 Spring Durable against cable routing 2 Beats *The terminal is flipped upside down so the beat is easier to see. ●High Tensile Strength due to Retainer

ZE05 Series^High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Product Specifications Aug.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Note 1 : This storage temperature and humidity is for long-term storage of unused products. ■Materials / Finish

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders.  ❶Series Name ❷Solder Tabs ❶Series Name ❷Applicable Cable Size 2022 ：20, 22 AWG (0.3-0.5SQ) 2：2mm H : Right Angle V : Straight HU/R : Housing/Retainer ❼Part Type P：Receptacle S：Plug Aug.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ❺Connector Type ❸Form Type/ Packaging SCF ：Female...

ZE05 Series^High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Right Angle Receptacle, SMT Solder Tabs Note 1 : The sales unit is 1 reel (300pcs/ reel). Please order by number of reels.

ZE05 Series^High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Straight Receptacle, SMT Solder Tabs Aug.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Note 1 : The sales unit is 1 reel (250pcs/ reel). Please order by number of reels. Note 2 : Suction tape is attached as a standard. Note 3 : Pin counts with the HRS No. left blank are currently under development. For details contact a Hirose sales representative.

ZE05 Series^High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector Aug.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Note 1 : The product is sold in sets so please order based on number of sets.

Aug.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ZE05 Series^High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector Note 1 : Contact Japan Automatic Machine (J.A.M) regarding crimping failure relating to applicable J.A.M. applicators or for other applicator inquiries via the J.A.M. website. (URL : http://www.jam-net.co.jp) Note 2 : Hand tools are developed as a prototype tool during product development. Use an applicator for mass production. Note 3 : Applicable cables are limited to those listed in the table. Note 4 : Cut the reel terminal...

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector Usage Precautions 1. Excessive pull force during unmating may damage the connector. If it is difficult to remove, push in lightly once and then release the lock. 2. Always make sure to turn off the power before reseating the connector. 3. Do not have direct contact on the terminal when electricity is flowing since it is extremely dangerous. 4. Contact a Hirose representative for harness procedures or handling manuals. Temperature（℃） Aug.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights...