*mydirectindustry

IX Series

Product catalog summary

Overview
The IX Series is a next-generation Ethernet connector designed for industrial machinery, compliant with IEC Standard IEC 61076-3-124. It is compact, robust, and supports high-speed data transmission with high EMC resistance.

Features

Size Reduction: The connector is 75% smaller than conventional RJ45 solutions, allowing for greater board design flexibility and supports 10mm pitch parallel mounting.
Single Action Lock Design: The connector features a simple plug-in locking mechanism with an audible click to confirm secure mating.
Robust Design: The receptacle shell minimizes prying forces and uses stainless steel for enhanced mechanical strength.
High EMC Resistance: Optimized shielding ensures secure data transmission.
High-Speed Transmission: Supports Cat.5e (1Gbps) and Cat.6A (10Gbps) Ethernet performance.
THR Compatible: Through-hole mounting enhances PCB strength and allows simultaneous reflow mounting with signal contact SMT.

Specifications

Contact Resistance: Signal: 30mΩ max; Shield: 100mΩ max.
Insulation Resistance: 500MΩ min at 500V DC.
Withstanding Voltage: 500V DC for 1 minute without flashover.
Mating Durability: 5,000 cycles.
Vibration and Shock Resistance: No electrical discontinuity under specified conditions.
Fretting Corrosion Resistance: No electrical discontinuity under specified conditions.

Materials and Finish

Receptacle: Insulator made of Liquid Crystal Polymer, contacts of copper alloy with partial gold plating, and stainless steel shell.
Plug: Insulator of polyamide resin, contacts of copper alloy with partial gold plating, and stainless steel shield case.

Product Specifications

Rated Current: 1.5A for all pins, 3A for specific pins.
Operating Temperature: -40 to +85℃.
Rated Voltage: 50V AC / 60V DC.

Product Number Structure
The product number indicates series name, mounting method, Ethernet support, mating key, number of positions, contact gender, and plating specifications.

Connector Mating Combinations
Various configurations are available for receptacle and plug combinations, with specific mating key types (A or B) required for compatibility.

Diagrams and Dimensions
The document includes detailed diagrams and dimensions for different connector configurations, including upward right angle, right angle, vertical, and straight plug designs.

Specifications
The document includes detailed dimensions for recommended land patterns, metal mask patterns, and panel cut-out dimensions for various connector models such as IX60G, IX61G, and IX80G. Tolerances for dimensions are specified as ±0.05 or ±0.02 where not listed.

Procedures
It outlines the recommended procedures for mounting and assembly, emphasizing the use of appropriate cables and tools. It also mentions the necessity of using company-identified jigs and tools for assurance in assembly processes.

Standards and Compliance
The connectors are IEC standard compliant, suitable for high-reliability applications such as automotive, medical instruments, public infrastructure, and aerospace/defense.

Recommendations
Users are advised to confirm product specifications and drawings before ordering or using the product. For applications demanding high reliability, consultation with a sales representative is recommended.

Tools and Accessories
The document lists cable assembly tools and adapters compatible with the DSX CableAnalyzerTM from Fluke Networks, highlighting the need for certified tools for cabling certification testing.

Notes
The document notes that specifications are reference values and subject to change for improvements. Users are encouraged to contact sales representatives for applications requiring high reliability.

Catalog excerpts

May.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment Product page https://www.hirose.com/product/en/products/IX/ Special features page https://www.hirose.com/product/en/pr/ix_industrial/

Open the catalog to page 1

ms IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment ms IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment May.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Advance with ix Industrial™Overview •Multi-purpose, compact I/O connector for industrial machinery. •IEC Standard IEC 61076-3-124 complaint •Compact, robust and supports high speeds •High EMC resistance 1. Contributes to Size Reduction The ix Industrial™ offers a size reduction of 75% compared to conventional RJ45 modular solutions....

Open the catalog to page 2

IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment H*5 IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment H*5 May.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 3. Robust design resistant to prying The PCB-mounted receptacle shell is designed to minimize the influence of prying forces from the plug side on the mated surface. Additionally, the through-holes prevent peeling of the mounted portion of the contact. Stainless steel is used to enhance the mechanical strength of the metal parts....

Open the catalog to page 3

Open the catalog to page 4

IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment H*5 Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. ■ Receptacle IX 61 G- A - 10 P (##) 0 0 6 0 6 6 6 Note : Contacts No.3 and 8 do not have a hole to pass the wire through the IDC guide.

Open the catalog to page 5

IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment Connector Mating Combination Diagram May.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Upward Right Angle Right Angle Right Angle, Downward Cabling Right Angle, Upward Cabling Note : Please use the same mating key (Type A, B) for both the plug and receptacle.

Open the catalog to page 6

Open the catalog to page 7

ms IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment May.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Part No. Note : This product is delivered with a cap for Pick & Place mounting. Please remove the cap before use.

Open the catalog to page 8

IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment H*5 Straight May.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Note : Cable assembly for IX32G is possible up to 8 positions. Contacts No. 3 and 8 do not have a hole to pass the wire though the IDC guide.

Open the catalog to page 9

Open the catalog to page 10

IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment H*5

Open the catalog to page 11

IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment Recommended Land Pattern Dimensions ● IX61G-#-10P Recommended Metal Mask Pattern (t=0.15) Reference Board Mounting Dimensions (From Mounting Side) (t=1.6) Pattern Prohibited Area Note : Dimension tolerances not listed are ±0.02. Note : Dimension tolerances not listed are ±0.05. Recommended Metal Mask Pattern (t=0.15) Reference Board Mounting Dimensions (From Mounting Side) (t=1.6) 7.15 Mating Position Pattern Prohibited Area Note : Dimension tolerances not listed are ±0.05. Note : Dimension tolerances...

Open the catalog to page 12

IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment ● IX80G-#-10P Reference Board Mounting Dimensions (From Mounting Side) (t=1.6) Recommended Metal Mask Pattern (t=0.15) Pattern Prohibited Area Mounting Area Contact No.10 May.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Note : Dimension tolerances not listed are ±0.02. Note : Dimension tolerances not listed are

Open the catalog to page 13

IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment Panel Mounting Dimensions Diagram ● Mated Condition Reference Panel Cut-out Dimensions Note : Dimensions are for reference. Housing Panel Mated Condition Reference Panel Cut-out Dimensions Housing Panel Note : Dimensions are for reference. Mated Condition Reference Panel Cut-out Dimensions Note : Dimensions are for reference. IX##G-#-#S-CV(7.0) Housing Panel May.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Open the catalog to page 14

IX Series/IEC Standard Compliant Next-Generation Ethernet Connector for Industrial Equipment H15 May.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Cable Assembly Tools Part No. This adapter requires the DSX CableAnalyzer™ from Fluke Networks for use. (Note) DSX CableAnalyzer™ is a registered trademark of Fluke Networks. Specifications mentioned in this catalogue are reference values. While considering to order or to use this product, please confirm the" Drawing" and" Product Specifications" sheets. While using connector with cable combination, please use appropriate cable....

Open the catalog to page 15

IX Series

IX Series

Catalog excerpts

All Hirose Electric Europe B.V. catalogs and technical brochures