FX22 SERIES
1 / 6Pages

Catalog excerpts

FX22 Series Floating range: ±0.6mm A double-beam contact structure 1. The floating design Structure provides for an mis-alignment of ±0.6mm in both X and Z directions in 0.5mm pitch product. (Fig.1) 2. A double-beam contact structure The independent double beam contact structure provides self-cleaning feature, ensuring highcontact reliability. (Fig.2) 3. Current capacity : 0.7A/pin The FX22 features a high current capacity of 0.7A/pin relative to its 0.5mm pitch. 4. Effective mating length of 1.5mm The signal contacts have effective contact lengths of 2.0mm and 1.5mm, which provide sufficient margin on the mating stroke. Mated connector dimensions The compact structure and low connector height fits well into areas as small as 5mm spacing, allowing for higher density mounting. (Fig.3) 6. Self-alignment and self-guiding structure Guide posts enable self-alignment and ensure a secure connection. Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Open the catalog to page 1

FX22 Series●0.5mm pitch Board-to-Board connectors with floating structure ■Product Specifications Rated current 0.7A Rated voltage AC 50V Ratings Items Operation temperature range : -55 to 85 Storage temperature range : -10 to 60 1. Contact resistance 2. Insulation resistance 3. Withstanding voltage 50 times insertions and extractions. No electrical discontinuity for more than 1 s. Frequency : 10 to 55 to 10Hz, approx 5 min Single amplitude : 0.75mm, 10 cycles for 3 axial directions. No electrical discontinuity for more than 1 s. 80mø max Insulation resistance : 100Mø min. 80mø max...

Open the catalog to page 2

FX22 Series●0.5mm pitch Board-to-Board connectors with floating structure ■Right-angle header ** Polarization mark Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Polarization mark

Open the catalog to page 3

FX22 Series●0.5mm pitch Board-to-Board connectors with floating structure Recommended PCB layout dimensions (PCB thickness : t = 1.6mm / Stencil thickness : t = 0.12mm) ●Right-angle receptacle ** Contact No.1 40 contacts 50 contacts 60 contacts 80 contacts ●Right-angle header ** 40 contacts 50 contacts 60 contacts 80 contacts Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Open the catalog to page 4

FX22 Series●0.5mm pitch Board-to-Board connectors with floating structure Embossed tape packaging dimensions ●Right-angle receptacle Ø1.5 Reel dimension diagram Un-reeling direction Reel dimension diagram Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

Open the catalog to page 5

FX22 Series●0.5mm pitch Board-to-Board connectors with floating structure Recommended Temperature Profile ●This temperature profile is based on the setting conditions shown below and is for reference only. For individual applications, the temperature profile may vary in accordance with the conditions. Please confirm the profile before mounting. (Peak temperature: 250 Material : Glass epoxy Solder composition Flux contained amount : 11wt% Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Metal mask thickness : 0.12mm Powered by TCPDF (www.tcpdf.org) Note 1 : This...

Open the catalog to page 6

FX22 SERIES 1 / 6Pages

Catalog excerpts

All Hirose Electric Europe B.V. catalogs and technical brochures

FX22 SERIES
1 / 6Pages