Group: Hirose Electric Co. Ltd.
Catalog excerpts
0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector FH72 Series Dimension Diagram : 11pos. 6.7m Dec.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ■Features 1. Space-saving design One Action Lock [Before mating] · Space saving design with 0.3mm pitch, 4.0mm width, 0.9mm height (Fig.1). 2. Automatic one action lock design One action locking by simply inserting FPC after mounting contributes to enhanced workability (Fig.2). (Lock release by operating the lock lever when removing.) · Operation of the actuator is not required at the time of FPC mating. · Can be inserted with one hand. · Contributes to assembly time reduction. · Lock lever will not be damaged by operation. · Eliminates failures due to FPC movement during locking. 3. High FPC retention force · The notches on both sides of FPC are held by the lock lever, generating a high FPC retention force in spite of the small size (Fig.3). [After mating] High FPC retention force due to lock design [FPC being inserted] [FPC inserted] 4. Easy FPC insertion · Wide guide for easy FPC insertion (Fig.1). 5. Compatible with 0.2mm thickness FPC · 3mm pitch connector compatible with 0.2mm standard thickness FPC (Appropriate rigidness of metal plates prevents FPC deformation and issues during inserting and fitting). 6. Detect FPC Mis-Mating with Original Structure Disengagement prevention ! · Can detect mis-mating by checking the FPC insertion status with FPC pattern (Fig.4). 7. Environmental · Halogen free *AS defined by IEC 61249-2-21. Br : 900ppm max, Cl : 900ppm max, Br+Cl : 1,500ppm max In cases where the application will demand a high level of reliability, such as automotive, please contact a company representa
Open the catalog to page 1Dec.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FH72 Series^0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector
Open the catalog to page 2FH72 Series●0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector ■Connector Dimensions A±0.15 B±0.15 0.6±0.1 HRS mark Cavity No. Contact No.2 Number of contacts Dec.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Lot No. Polarity mark Contact No.1 (0.22) 0.6±0.1 C±0.15 D±0.15 2.08±0.1 (Vacume pick up area) 0.31±0.1 Contact point position Contact point position Note 1 : Dimensions in parentheses are reference. 2 : Level of contact and retention tab lead shall be 0.1 max. 3 : Packaged in tape and reel. See the packaging specifications...
Open the catalog to page 3FH72 Series●0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector Recommended PCB Mounting Pattern Dec.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (Connector Image) (Recommended stencil pattern thickness : t=0.1) B 0.35±0.01 (Land pattern image) Recommended Stencil Pattern Note 8 : 'n' shows the number of contacts. Under planning (Note 1) Under planning (Note 1) Under planning (Note 1) Under planning (Note 1) Under planning (Note 1) Under planning (Note 1) Under planning (Note 1) Under planning (Note 1) Under planning (Note 1)...
Open the catalog to page 4Dec.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FH72 Series^0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector Note [9~> When designing the FPC dimension R must be 0.5mm minimum. flQ) Apply indicated tolerance to exposed part of conductor. Material Name Covering film Cover adhesive Surface treatment Note 1. Material composition of FPC is a reference example. Please adjust the thickness of the FPC mating section to 0.2±0.03mm in reference to the material composition. 2. For the details of the material composition, please...
Open the catalog to page 5FH72 Series^0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector Dec.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Unreeling direction • Reel Dimensions • Leader, Trailer Dimensions (J : Reel inner width) Unreeling direction Unreeling direction 400mm min (Leader) (Trailer, empty components) Embossed \ carrier tape (K : Reel outer width); Note 1 : Contact positions without HRS No. are currently under planning. Please contact Hirose for detailed information about product variations.
Open the catalog to page 6FH72 Series●0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector Temperature Profile Applicable Conditions Reflow environment : Room air Solder : Paste type Sn/3.0Ag/0.5Cu (M705-GRN360-K2-V made by Senju Metal Industry Co.) Test PCB : PCB material and size Glass epoxy 45×25×1mm Land size per recommendation on page 4. Dec.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Metal mask : Thickness and opening size per recommendation on page 4. This temperature profile is based on the above conditions. It may vastly depending on solder...
Open the catalog to page 7FH72 Series●0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector Connector operation and points to note [Operation Method] As this connector is a small-sized, thin product, care needs to be taken when handling. Please check the following before use. 1. Initial Condition ①The product is delivered with the lock lever closed. The lock lever does not need to be operated other than when removing the FPC. 2. FPC insertion method ①Insert FPC with the conductor surface facing upwards, horizontally to the board surface until fully inserted. Dec.1.2019 Copyright...
Open the catalog to page 8FH72 Series●0.3mm Pitch, 0.9mm Height, Top Contact One Action Lock, High FPC Retention Force Connector Connector operation and points to note [Operation Method] 4. FPC extraction method ①Push up the lock lever slowly and release the lock. [Caution] ・The lock lever cannot be opened over 180°. Do not open it over this angle. ・After releasing the lock lever, do not touch the contact. ・Do not raise, pull, or twist the lock lever. Dec.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Load is concentrated on the rotational axis leading to damage Rotational axis Excessive force...
Open the catalog to page 9All Hirose Electric Europe B.V. catalogs and technical brochures
-
DF36 Series
14 Pages
-
IX Series
15 Pages
-
Connector Selector 2021
124 Pages
-
ZE05 Series
8 Pages
-
DF40T Series
1 Pages
-
ZE05 Series
1 Pages
-
BM46 Series
8 Pages
-
DF63 SERIES
8 Pages
-
FH48 SERIES
8 Pages
-
HR43 SERIES
4 Pages
-
FX23 SERIES
12 Pages
-
DF59 SERIES
12 Pages
-
DF62 SERIES
8 Pages
-
HR08D SERIES
6 Pages
-
BM14 SERIES
12 Pages
-
FX8 SERIES
16 Pages
-
FX22 SERIES
6 Pages
-
FX20 SERIES
12 Pages
-
DF33C SERIES
8 Pages
-
DF52 SERIES
6 Pages
-
DF57H SERIES
8 Pages
-
FH52 SERIES
20 Pages
-
PQ50 SERIES
20 Pages
-
BM24 SERIES
6 Pages
-
BM25 SERIES
1 Pages
-
TM31P SERIES
5 Pages
-
HR41A SERIES
8 Pages
-
Connection News 2016
21 Pages
-
A1
8 Pages
-
Coaxial Connectors
5 Pages
-
Miniature Connector
16 Pages
-
Subminiature Coaxial Switch
10 Pages