DF63 SERIES
8Pages

15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Unique locking mechanism is contained inside the header Guide keys prevent incorrect insertion Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Socket and header design avoids short-circuit between adjacent contacts. Guide pins temporarily hold and assure proper orientation of the connector. DF63 has the capacity to handle a max of 15A when using 16 AWG wire. (Please refer to the chart for the rated current in other pin counts.) 2. Secure mating and clear tactile click The locking mechanism delivers a clear and tactile click, which prevents incomplete mating. (Fig. 2) Crimp contact Lock portions of the plug and the header start to engage. 3. Prevents incomplete insertion of the crimp contact A structure to prevent incomplete insertion of the crimp contacts is provided. (Fig. 3) 4. Prevents incorrect mating A mechanism has been added to prevent reverse mating and incorrect mating between different number of positions. (Fig. 4) Header contact Prevention of insufficient insertion of the crimp contact 5. Reverse mounting prevention to PCB The pin header is equipped with a guide post to prevent reverse insertion on the PCB. (Fig. 1) Crimp contact (insufficiently inserted) 6. Molded lance design Lock does not work. The lance is actually part of the housing instead of being a part of the terminal. This prevents tangled wires during assembly. 7. Short-circuit prevention The wall structure between the contacts helps to isolate the contacts and prevents short circuits between contacts. (Fig. 1) Lance and header protection mechanism meet. Capable of being potted, up to 5mm. 9. Solder crack prevention Glass-reinforced resin is used on the pin header to prevent solder cracks due to thermal contraction. Keying options are available to prevent incorrect connections due to the use of multiple connectors on the same board. ■Standard type (color: black) 10. Glow Wire compliance (Compliant with IEC 60695-2-11) Keying options were provided to prevent incorrect connections. Keying options prevent incorrect connections due to the use of multiple connectors on the same board. When using identical pin counts, two versions are available with different keying options.(Fig. 4) ■R-type (color: white) Supports 7.92mm pitch Also supports 7.92mm pitch with 2 or 3 pos. without pins Note 1 : * means the product will be available upon request. Please contact Hirose representative.

DF63 Series●15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply ■Product Specifications No. of Contacts 1 2 3 4 Current Rating 5 6 2 (7.92mm pitch) 3 (7.92mm pitch) Specification Voltage Rating UL,C-UL TÜV Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Item 1. Insulation Resistance 2. Withstand Voltage 3. Contact Resistance 4. Vibration Resistance 5. Shock Resistance 6. Moistureresistance 7. Temperature cycles AC/DC 630V AC/DC 600V AC/DC 300V Measured at 1mA and no higher than 20mV No electrical discontinuity of 1 µs or greater Frequency 10-55 Hz,...

DF63 Series●15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply ■Straight Header ●Recommended PCB Layout (Board thickness : 1.6±0.1) [1 to 6 pos.] Polarization mark Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Standard Type (Guide post : Left Side, Color : Black) Part No. R Type (Guide post : Right Side, Guide key, Color : White) Part No. Under development 680-0513-2 ** Under development 680-0537-0 ** Under development Note 1 : Bag packaging (100 pcs/pack). Order by number of packs. Note 2 : Please contact Hirose representative if you have request...

DF63 Series●15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply ■Right Angle Header 1.14 [Specification number]** None : Tin plated (01) : Gold plated Standard Type (Color : Black) Part No. DF63-1P-3.96DS(**) DF63-2P-3.96DS(**) DF63-3P-3.96DS(**) DF63-4P-3.96DS(**) DF63-5P-3.96DS(**) DF63-6P-3.96DS(**) Polarization mark Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Unit : mm HRS No. Under development 680-0528-0 ** 680-0527-7 ** Under development Note 1 : Bag packaging (100 pcs/pack). Order by number of packs. Note 2 : Please contact Hirose...

DF63 Series●15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply In-line Plug (Panel Lock Type) C+F D Panel thickness Polarization mark [Specification number]** None : Black Under development Under development Note 1 : Bag packaging (100 pcs/pack). Order by number of packs. In-line Plug Polarization mark Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Under development [Specification number]** None : Black Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.

DF63 Series●15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply Crimp Contact for Socket 2.14 Applicable wire gauge mark 16 18 Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Under planning Finish Tin plated Gold plated Tin plated Gold plated Tin plated Gold plated Crimp Contact for In-line Plug Applicable wire gauge mark 16 18 HRS No. 680-0529-2 680-0536-8 Under development 680-0538-3 Under development Under planning Applicable wire (Tinned, Annealed Copper Wire) Wire size (Stranded wire conductor) Jacket diameter Finish Tin plated Gold plated Tin...

DF63 Series●15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply BApplicable Crimping Tool Type Wire type DF63-2022SCF DF63-2022SCFA DF63-2022PCF AP105-DF63-2022-2 Under development UL1015(Note3) DF63-2022PCFA HT802/DF63-1618S-1 550-0411-2 00 UL1007(Note4, 5) DF63-1618SC HT802/DF63-1618S-2 550-0413-8 00 UL1015(Note4, 6) DF63-1618SCA HT802/DF63-1618P-1 550-0423-1 00 UL1007(Note4, 5) DF63-1618PC HT802/DF63-1618P-2 550-0424-4 00 UL1015(Note4, 6) DF63-1618PCA Hand tool HT802/DF63-2022S-1 550-0432-0 00 UL1007(Note4, 7) DF63-2022SC HT802/DF63-2022S-2 Under development UL1015(Note4,...