BM14 SERIES
1 / 12Pages

0.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H = 0.8 mm type) Molded structure 1. Two stacking height options Two separate heights available: 0.8 and 1.3 mm The molded structure provides security and insulation between the terminals and the board 2. Ultra space-saving design With its drastically reduced depth of 1.98 mm, this series can fit in the tightest designs. Solid mating feedback 3. Two point contact system The two point contact structure encloses the plug contacts and assures a completely secure connection. (Fig.1) 4. Superior tactile feedback A clear tactile click is delivered upon the successful completion of the mating process (Fig. 2). 5. Drop and shock resistant structure Dimples were designed into the plug contacts; they increase retention force and absorb shock when dropped. 6. User friendly operations The low-profile connectors with stacking height of 0.8 mm maintain the mating self-alignment ra n g e o f 0 . 3 m m , s e c u r i n g e a s y m a t i n g operations. 7. No pattern prohibited area No restrictions on PCB layout patter n are imposed, as thin molding technology maintains the effective mating length of 0.2 mm while achieving complete insulation between the bottom side of the receptacle and the board. Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Molded structure Two-point contact system Clear tactile feeling Image: 0.8 mm stacking height

BM14 Series●0.4 mm Contact Pitch, Board-to-FPC Connectors Product Specifications Current capacity Operating temperature range Operating humidity range Rated voltage Storage temperature range Storage humidity range No flashover or insulation breakdown No electrical discontinuity of 1 µs or longer Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions Contact resistance: Maximum of 100 mø Insulation resistance: Minimum of 25 Mø Contact resistance: Maximum of 100 mø Insulation resistance: Minimum of 50 Mø Temperature: -55ç ➝ 5 to 35ç ➝ 85°C ➝ 5 to 35ç Time: 30 ➝...

BM14 Series●0.4 mm Contact Pitch, Board-to-FPC Connectors Recommended PCB layout (H = 0.8 mm) With metal fittings Without metal fittings B±0.02 Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Note 1 : Please place orders in full reel quantities. Note 2 : The only difference between "with metal fittings" and "without metal fittings" is that the contacts at the four corners will be used as reinforcing metal fittings or signal contacts. There is no difference in the performance or dimensions of the connector. Note 3 : This connector is NOT

BM14 Series●0.4 mm Contact Pitch, Board-to-FPC Connectors Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Recommended PCB layout (H = 1.3 mm) With metal fittings Without metal fittings C±0.02 With metal fittings Part No. Without metal fittings Part No. Note 1 : Please place orders in full reel quantities. Note 2 : The only difference between "with metal fittings" and "without metal fittings" is that the contacts at the four corners will be used as reinforcing metal fittings or signal contacts. There is no difference in the performance or dimensions of the connector....

BM14 Series●0.4 mm Contact Pitch, Board-to-FPC Connectors Connector for Conductivity Tests A B 1.98 Recommended PCB mounting pattern With metal fittings Without metal fittings B±0.02 Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. With metal fittings Without metal fittings Note 1 : Please place orders in full reel quantities. Note 2 : The only difference between "with metal fittings" and "without metal fittings" is that the contacts at the four corners will be are used as reinforcing metal fittings or signal contacts. There is no difference in the performance or...

BM14 Series●0.4 mm Contact Pitch, Board-to-FPC Connectors Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Recommended PCB layout With metal fittings Without metal fittings C±0.02 Note 1 : Please place orders in full reel quantities. Note 2 : The only difference between "with metal fittings" and "without metal fittings" is that the contacts at the four corners will be used as reinforcing metal fittings or signal contacts. There is no difference in the performance or dimensions of the connector. Note 3 : This connector is NOT

BM14 Series●0.4 mm Contact Pitch, Board-to-FPC Connectors Embossed Carrier Tape Dimensions: H = 0.8 mm (JIS C 0806 Compliant) Unreeling direction Ø1.5 mm holes for feed mechanism on back edge of carrier tape Reel Dimensions Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Note: The same as the embossed tape packaging without pick-and-place tape except f

BM14 Series●0.4 mm Contact Pitch, Board-to-FPC Connectors Product label Ø1.5 mm holes for feed mechanism on back edge of carrier tape Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Embossed Carrier Tape Dimensions: H = 1.3 mm (JIS C 0806 Compliant) Receptacle Reel Dimensions Without pick-and-place tape Part No. A BM14EB(1.3)-40DS-0.4V(51) 24 BM14EB(1.3)-50DS-0.4V(51) Part No. A BM14EC(1.3)-44DS-0.4V(51) 24 BM14EC(1.3)-54DS-0.4V(51) With pick-and-place tape Note: The same as the embossed tape packaging without pickand-place tape except for the T dimension. Ø1.5 mm...

BM14 Series●0.4 mm Contact Pitch, Board-to-FPC Connectors Unreeling direction Reel Dimensions Ø1.5 mm holes for feed mechanism on back edge of carrier tape Product label Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Note: The same as the embossed tape packaging without pick-and-pla

BM14 Series●0.4 mm Contact Pitch, Board-to-FPC Connectors Usage Recommendations 1. Recommended solder profile Temperature(ç) 250 Jul.1.2016 Copyright 2016 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Conditions 1. Peak temperature: 250°C 2. Heating part: 220°C or more, 60 seconds or less 3. Preheating part: 150 to 180°C, 90 to 120 seconds 4. Cycle: Maximum of 2 cycles Note 1 : The temperatures indicated are the surface temperatures of a printed circuit board at the points of contact with the terminals. 2. Recommended manual soldering Manual soldering: 340 ±10°C for 3 seconds 3. Recommended...