Gauge+switch (with a terminal strip inside) P Range: 0 to 0.25 upto 70 bar 0 to 5 upto 1050 psi Specifications Accuracy Migration Range First marking on the scale Sensing element Wetted parts Case material & dial size ±2% of the FSD (Ascending) Minor from high to low port 0-0.25 to 0-70 bar or equivalent range in other units 20% of the FSD Piston Body material, SS 302 spring, ceramic magnet & seals Stainless steel (SS 304): 2” , 2.5” , 3.5” , 4” , 4.5” , 6.0” Engineering polymer: 2.5”, 4.5”, 6” Bayonet: 4.0” Direct, front flange, 2” pipe & surface mounting 200 bar for Aluminum & Brass, 400 bar for SS & Monel 0 to 80°C (32 to 175°F) Aluminum, Brass, SS 316 & Monel Buna-N, Viton, EPDM Float glass(Std.), toughened glass, acrylic & safety glass. 1/4” NPT(F) (Std.), 1/4" BSP(F) and others through adaptor In-line, rear, bottom, in-line & bottom, in-line & back Up to the max. working pressure from high & low side IP 65 / NEMA-4 Mounting Maximum working pressure Maximum process temperature Body material Seals Window Connection Porting Over range protection Protection for gauge & switch Options Gauge+switch (with a DIN plug on top) Liquid filling (glycerine/ silicone) Red follower pointer Customer logo Dual scale Color band Filter mesh in (+) connection Reverse port (pointer moves from right to left) Descending calibration Thick body for 450bar application 1 or 2 SPSTs with a DIN plug 1 or 2 SPSTs with a terminal strip 1 or 2 SPSTs with a built in relay 1 or 2 SPDTs with a DIN plug 1 or 2 SPDTs with a terminal strip Available in engineering polymer (EP) Case      MOUNTING BRACKETS Surface mounting Horizontal pipe mounting Removable glass Strong and durable Panel mounting possible Conde