Seismic Fixing Materials Seismic fixing material that requires no anchor installation. With strong adhesive properties, it can securely fix the target object. )) The adhesive performance remains stable over a long period, allowing for repeated use. )) It does not dissolve (hydrolyze), so it does not stain or damage the target object. A : Sheet size 100 x 100 mm T3 : Thickness 3 mm B : Sheet size 400 x 400 mm T5 : Thickness 5 mm | Specifications Sizes: Type A (100 x 100 mm), Type B (Large free-cut sheet 400 x 400 mm) This product can be freely cut to size using scissors or Thomson die-cutting. Example: Type A (100 x 100 mm), Thickness 3 mm The part number is NTGA-T3. | Anchor-Free Seismic Fixing (Figure 1) Traditionally, when performing seismic fixing on floors with waterproofing or protective treatment, it was necessary to insert anchor bolts into the floor (Figure 1). NonBuren Tack Gel has strong adhesive properties, allowing secure fixation with sufficient seismic strength without the need for anchor installation (Figure 2). Therefore, there is no longer any erosion beneath the floor caused by anchors, and anchor removal is unnecessary when moving equipment. Furthermore, since the anchor-free seismic fixing can be removed when moving equipment, it does not damage the floor. licable Floor Classification Applicable Floor Classification The values shown in ( ) apply to tanks installed on the basement and first floor (ground level). The Japan Building Center (JBC), "Guidelines for Seismic Design and Construction of Building Equipment, 2014 Edition, Part 3, Appendix 2"

The optimal size is selected based on the machine weight and center-of-gravity height. Anchorless Selection Calculation Table (for reference) | Adhesive Strength (In-House Test: Vertical Pull Test) Adhesive Strength (Stainless Steel Plate) Note: All measured values are for reference only and are not guaranteed. Note: Due to its high adhesiveness, the surface of the adhered object (such as paint) may peel off. Note: A Sunshine Weather Meter is an accelerated weathering tester that uses an artificial light source simulating sunlight, combined with intermittent water spray, to evaluate weather resistance...