LCR METER IM3523/IM3533/IM3533-01 Component measuring instruments From Production Lines to Research and Development A New Series of LCR Meters to Meet Your Applications New LCR METER Models IM3523, IM3533, and IM3533 -01 are highly cost-effective testers that provide greater performance and better functionality than previous HIOKI models, such as a high basic accuracy of ±0.05%, a wide measurement frequency from 1 mHz (40 Hz for the IM3523) to 200 kHz, highspeed measurement of up to 2 ms, highly reliable measurement using the contactcheck function, and measurement of turn ratio and mutual inductance. Select the best model according to your application, from production lines to research and development.

2 For Production Lines The Perfect Impedance Analyzer Product Lineup IM3533,IM3533-01 IM3523 *1 The check and double-check marks in the “Usage” rows indicate the recommendation level. The double-check mark represents a highly recommended application. Model LCR METER IM3523 ✔✔ ✔✔ ✔✔ ✔✔ LCR component production ✔ ✔ Transformer and Usage *1 coil production LCR METER IM3533 -01 ✔ Research and development LCR METER IM3533 ✔✔ ✔✔ Z (impedance [Ω]) Y (admittance [Ω]) θ (phase angle [°]) Rs (equivalent series resistance = ESR [Ω]) Rp (parallel resistance [Ω]) X (reluctance [Ω]) G (conductance [S]) B (susceptance...

4 Features High-Speed, High-Accuracy, and Easy-to-Use Basic Performance IM3523 ● Wide measurement frequency range The measurement frequency can be freely set to DC or any value in the 1 mHz (40 Hz for the IM3523) to 200 kHz range at high resolution (five-digit resolution [1 mHz resolution for less than 100 Hz]). This makes it possible to measure the resonant frequency and perform measurement and evaluation under conditions close to actual conditions. DC 1mHz IM3533 IM3533-01 DC 40Hz IM3523 200kHz 200kHz IM3533 IM3533-01 ● Basic accuracy ±0.05% The basic accuracy of Z is ±0.05%. This ts a wide...

5 Features of LCR Meter Model IM3523 Integration into Production Lines and Automated Machinery ● General specifications of the IM3523 ● Easy setup using a numeric keypad on a simple, easy-to-read monochrome LCD IM3523 A simple user interface is provided with a high-contrast graphic LCD display, function keys, and numeric keypad. For numeric value settings such as the comparator setting, the numeric keypad can be used to enter numbers easily and quickly. Basic measureZ,Y,θ,Rs,Rp,X,G,B,Ls,Lp,Cs,Cp,Q,D ment items DCR 3 Measurement items Transformer − measurement Temperature T − Basic accuracy ±0.05%rdg....

6 Features of LCR Meter Model IM3533 Winding, Coil and Transformer Production ● General specifications of the IM3533 ● Transformer measurement IM3533 IM3533-01 Turn ratio N, mutual inductance M, and inductance difference ΔL can be measured on the transformer measurement screen. Basic measureZ,Y,θ,Rs,Rp,X,G,B,Ls,Lp,Cs,Cp,Q,D ment items DCR 3 (with temperature compensation function) Measurement items Transformer N,M,Δ L measurement Temperature T 3 Basic accuracy ±0.05%rdg. Measurement frequency 1mHz to 200kHz Measurement voltage 5mV to 5V/2.5V *1 Measurement time 2ms Comparator 2 items: HI/IN/LO,...

7 Features of LCR Meter Model IM3533-01 Research and Development and Electrochemistry ● General specifications of the IM3533 -01 ● Frequency sweep IM3533-01 Measurements can be performed automatically at up to 801 frequency points by specifying the frequency range or in the frequency list mode. The measurement results can be saved to a USB ash drive or to a computer via an interface, which then can be used to perform frequency analysis of samples. Basic measureZ,Y,θ,Rs,Rp,X,G,B,Ls,Lp,Cs,Cp,Q,D ment items DCR 3 (with temperature compensation function) Measurement items Transformer N,M,Δ L measurement...

8 Capacitors and Inductors C-D + ESR Measurement of Capacitors IM3523 IM3533 IM3533-01 Continuous measurement can be performed with high speed under multiple conditions! LCR mode [IM3523] Cs and D display screen (120 Hz measurement) Continuous measurement screen [IM3523] LCR mode [IM3523] Rs display screen (100 kHz measurement) C-D (120 Hz) and low ESR (100 Hz) measurement can be performed for functional polymer capacitors. Different measurement items can be measured continuously under different measurement conditions (frequency, level, and mode). C Measurement of Polar Capacitors Enlarged view...

9 Transformer Winding and Sweep Measurements Variety of Transformer Winding Measurement Functions In addition to the L-Q and DCR measurements, the IM3533 and IM3533-01 enable you to measure the turn ratio N, mutual inductance M, and inductance difference ΔL that are required for the measurement of transformers.* Connections must be switched manually or a selector such as a scanner unit is required separately. * N IM3533 IM3533-01 Turn ratio N measurement (1) Measure L (L1) on the primary side (2) Measure L (L2) on the secondary side (3) Calculate turn ratio N from L1 and L2 N = L1 L2 N :1 L1...

10 Linking to PC Capturing Measurement Data ● Saving and loading data via front USB port IM3533 IM3533-01 Measurement results and settings can be saved to a commercially available USB ash drive connected to the front USB port. (The USB port on the front panel is specically for a USB ash drive. Batch save all the measurement results to a USB ash drive after saving them to the internal memory of the IM3533(-01). Some USB ash drives may not be supported due to incompatibility issues.) Measurement results and settings EXT I/O (handler interface) Save to USB ash drive EXT I/O (handler interface) RS-232C/LAN/GP-IB...

11 EXT I/O ● Handler (EXT I/O) interface The handler (EXT I/O) interface enables output of an end of measurement signal and measurement result signal, and input of signals such as a measurement trigger signal to control the measuring instrument. Each of the signal lines is isolated from the measurement and control circuits, and the structure is designed to protect against noise. When designing a control system using the EXT I/O interface, be sure to read the instruction manual and check the necessary technical information. Example of Typical EXT I/O Timing (LCR Mode) t1: Delay setting time from...