*mydirectindustry

Catalogs
HIOKI E.E. CORPORATION
HIOKI 8860-50/8861-50 MEMORY HiCORDER

HIOKI 8860-50/8861-50 MEMORY HiCORDER

Product catalog summary

Introduction
The HIOKI MEMORY HiCORDER 8860 Series offers enhanced functionality with mouse and keyboard support, providing PC-like operability. It combines high-speed waveform monitoring with real-time trend graph recording.

Specifications and Features

20 MS/s high-speed sampling with 16-bit resolution on isolated inputs.
Up to 32 isolated input channels for high-speed signals and multi-channel logging on up to 128 channels for low-speed signals.
Real-time saving to hard disk and dual-timebase sampling for simultaneous fast and slow monitoring.
Enhanced control via LAN and USB, supporting various measurement objects.

Enhancements from Earlier Models

Faster CPU for improved operability and response.
Three USB 2.0 ports for storage devices, mouse, and keyboard.
New REC&MEM function for capturing high-speed transients while recording at slow speeds.
New LCD with a wider viewing angle.
Compatibility with existing input modules and new high-voltage input module.

Memory Functionality

High-speed waveform monitoring with up to 20 MS/s sampling rate.
Solid-state memory for vibration-resistant on-board testing.
Large internal memory capacity ranging from 32 megawords to 1 gigaword.
Segmentation function for memory division into 4,096 blocks.
External sampling input capability for synchronization with external clock signals.

High-Voltage Measurement

Isolated input channels for measuring high voltages in applications like three-phase inverters.
Use of HIGH VOLTAGE UNIT 8961 or DIFFERENTIAL PROBE 9322 for CAT III 600-volt AC and DC measurements.

REC&MEM Function and Real-Time Saving

Simultaneous long-term monitoring and transient recording.
Real-Time Save function for long-term measurements independent of internal memory capacity.
Capability to capture high-speed signals by triggering during slow recording.

Waveform Observation and Analysis

Changing compression and zooming while measuring.
Scroll-back display for viewing earlier waveform portions without interrupting recording.
Sheet display function for multi-channel measurements.

Hybrid Recorder Functionality

Combines oscilloscope and data logger functions in a single instrument.
Economical cost per channel with Scanner Module switching 16 input channels through one A/D converter.
Dual-timebase sampling for capturing high-speed and low-speed signals simultaneously.

Trigger and Search Functions

Trigger function for detecting waveform anomalies during capturing.
Search function for detecting anomalies post-capture.

Trigger Functions

Drop Trigger: Captures sudden power losses.
Window Out Trigger: Captures impulse or surge noise.
Multiple Triggers: Allows setting multiple trigger parameters on a single channel.
Stop Trigger: Controls measurement timing for MEM and REC functions.
Slope Trigger: Monitors noise on periodic waveforms.
Edge and Level Detection: Supports both edge and level detection for logic triggers.

FFT Analysis Function

Single and Two-Channel FFT: For spectrum and transfer function analysis.
Octave Analysis: Used in acoustic analysis.
Simultaneous Calculations: Up to 16 calculations can be performed simultaneously.
Window Functions: Seven options available for window functions.
Phase Highlight Display: Emphasizes parts of a waveform exceeding a certain level.

Data Management and Connectivity

Remote Control: Allows control via an internet browser.
USB and External Monitor Support: Includes USB ports and VGA output.
Automatic Saving: Supports automatic saving during measurement.
Redundancy: Allows setting up to two storage destinations to prevent data loss.

Specifications

Input Channels: Maximum of 16 or 32 analog channels depending on the model.
Measurement Functions: Includes MEM, REC, and FFT functions.
Sampling Rate: Up to 20 MS/second.
Data Storage: Supports PC Card and optional hard disk drive.
Backup Functions: Preserves settings and waveforms even after power off.

Connectivity and Functions
The device supports RJ-45 connectors for Ethernet 100BASE-TX and 10BASE-T. It functions as an HTTP server, FTP server, supports file sharing, is DHCP compatible, and can send mail.

Monitor Output
Includes a 15-pin D-sub connector for SVGA output.

Environmental Conditions
Operational temperature range is 0°C to 40°C with humidity between 20% to 80% RH. For storage, the temperature range is -10°C to 50°C with humidity between 20% to 90% RH.

Compliance Standards
Safety compliance is according to EN61010, and EMC compliance includes EN61326, EN61000-3-2, and EN61000-3-3.

Power Requirements
The device operates on 100 to 240 V AC (50/60 Hz) and 12 V DC using the DC POWER UNIT 9684 (factory installation only). Power consumption varies from 220 VA to 350 VA depending on printer usage.

Dimensions and Mass
Dimensions and weight vary based on printer installation, ranging from approximately 330 mm W × 250 mm H × 184.5 mm D, 8 kg to 12 kg.

Supplied Accessories
Includes manuals, power cord, input cord label, and an application disk.

Memory and Timebase
The device supports various memory capacities from 32MW to 1GW, with different division settings for recording. It features a dual timebase with a maximum recording time that varies based on memory capacity.

Display and Printing
Features a 10.4 inch TFT color LCD display. Printer functions are available with optional printer units, supporting different paper sizes and recording speeds.

Trigger Functions
Offers multiple trigger sources and types, including level, window, period, glitch, slope, and voltage drop triggers. Logic triggers and filters are also available.

Memory Functions
Supports pre-trigger functions, time axis adjustments, and various sampling rates. Memory can be split for different uses, and waveform calculations are supported.

FFT Function
Provides analysis modes such as linear spectrum, power spectrum, and auto-correlation function. Supports multiple window functions and screen displays.

Measurement Capabilities
The units support various measurement functions including voltage, temperature, and strain measurements. They offer features like isolated BNC connectors, multiple measurement ranges, high sampling rates, and integrated filters to suppress aliasing distortion.

Data Handling
Describes data handling capabilities such as real-time save functions, memory transfer, waveform search functions, and recording length options. It also covers screen and printing functionalities, including split-screen displays and logging.

Additional Features
Additional features include measurement parameter printing, cursor measurement, scaling, remote control, auto setup, and event marker input. The document also mentions options for remote control and auto-save functionalities.

Options and Accessories
Lists optional specifications and accessories for the 8860 series, including various connectors and cables required for specific measurement functions.

Voltage and Temperature Measurement
The voltage measurement range is from 500mV to 2V/DIV with a resolution of 1/80 of the measurement range using 12-bit A/D conversion. Temperature measurement ranges from 10°C to 100°C/DIV. The highest sampling rate for voltage input is 1MS/s, and for temperature measurement, it is 4kS/s.

Thermocouple Range
Various thermocouple types are supported, including K, E, J, T, N, R, S, and B, with specific temperature ranges for each. Reference junction compensation is available both internally and externally.

Strain Measurement
The STRAIN UNIT 8939 supports 2 channels for distortion measurement with a range of 20mε to 1000mε/DIV. It features electronic auto-balancing and a highest sampling rate of 1MS/s.

Frequency and Voltage Measurement
The F/V UNIT 8940 supports frequency measurement from DC to 100kHz and voltage measurement from 0.5mV to 2V/DIV. It includes functions for integration, pulse duty ratio, and current measurement with compatible sensors.

Charge Measurement
The CHARGE UNIT 8947 is designed for acceleration measurement with charge input and internal pre-amp input options. It supports a range of 50m (m/s²)/DIV to 10k (m/s²)/DIV.

Software
MEMORY HiVIEWER 9725 and FlexPro software are provided for data analysis and presentation. MEMORY HiVIEWER allows waveform processing and data analysis on a Windows computer, while FlexPro offers extensive analysis functions and data presentation capabilities.

Additional Features
Details options like the DC POWER UNIT 9684 and PROBE POWER UNIT 9687, which provide power to connected probes. The DIFFERENTIAL PROBE 9322 is used for high-voltage floating measurement and surge noise detection.

Specifications
Outlines specifications for various electronic measurement devices and accessories. Key specifications include:

Voltage ratings for grabber and alligator clips, with maximum allowable inputs of 2000 V DC and 1000 V AC (CAT II), and 600 V AC/DC (CAT III).
Output voltage divider for 1/1000 of input with BNC connectors, switchable for DC, AC, and RMS modes.
Power source connections for AC Adapter 9418-15, Probe Power Unit 9687, and others.

Procedures
Instructions for connecting various power sources and probes are provided, including:

Connecting to HiCORDER logic terminal and F/V UNIT 8940 using specific power cords and conversion cables.

Norms and Standards
Specifies accuracy conditions at 23 ±5°C/73 ±9°F, 35 to 80% relative humidity, with a guarantee for one year.

Recommendations
Recommendations include:

Using factory-installed options for certain units, which cannot be installed by the user.
Choosing appropriate memory boards and input modules for MEMORY HiCORDER models.
Using only HIOKI-sold PC Cards for compatibility and performance assurance.

Key Components and Accessories
Lists various components and accessories, such as:

Clamp on Probes with different bandwidth responses and current capacities.
Logic Probes for detecting voltage or relay contact signals.
Memory Boards with varying capacities for data storage.
Conversion cables and connection cords for specific configurations.

Contact Information
Contact details for HIOKI offices in Japan, USA, China, India, and Singapore are provided, along with email addresses and websites.

Catalog excerpts

HIOKI MEMORY HiCORDER 8860-50,8861-50 Recorders / Digital Oscilloscope New REC&MEM Function New Recording Logger and Oscilloscope The HIOKI MEMORYHiCORDER 8860 Sries now sports vastly enhaneed functionality. With new moiise and keyboard support, thse models fealure personal computei-like operabihry, accclcratcd by new internai high-speed hardware that provides simples faslcr op騩ration, Tbc Memory function monitors fast waveforms as easity as an oscilloscope ulule the Ix>gger function records trend graphs in rcal tinie, Convenience is improved by enhaneed control via LAN and USB capabilities. A broad sͩlection of plug-in front-end modules supports a wide varicty of nieasurcmcut objects. Abuonnai pbe-nomena are accurately captured with 20 MS/s sampling and 16-bit rsolution on isolated inputs. Existing iiiput modules for tonner 8860 models can l>e used as is. www-hiokJ.com; ISO 9001 ISO14001

Open the catalog to page 1

Asan Oscilloscope As a Data Logger Record UUaueforms in Any Situation Model 8860 50/8861-50 Sries Dbut!

Open the catalog to page 2

CapabilitiesandFeatures 20MS/shigh-speedsamplmgUpto 32 isolated input channels [high-speedsignais)Real-timesaving to hard disk Dual-timehase sampling for simultaneous fast and slowmonitorinMulti-channefloggingon up to128channels(low-speedsignais) C3 EnhancementsfromEarlierModels8860and8861 AfasterCPUgreatlyenhancesinstrumentoperabilityandresponse. ThreeUSB2.0portssupportaUSBstoragedevicealongwithmouseandkeyboard. NewRECSMEM(RecorderandMemory)function.Capturewaueformsofhigh-speedtransientswhilesimultaneously recordingatslowspeed. NewLCDwithwideruiewingangleforeasierwaveformobservation. Uses the...

Open the catalog to page 3

sing tac samc opcrating pnncipi as a oiflita to the cxpandcd uiteinal nicrnoij at b^h spccd. S^nphng rate is upto 20 MS's (50-ns period) for\alI channels smiultancously Capture unprcdicnjblc operating anomalies and t rataient wavcf篻f ms. ■ Records to So»tV5tate M pinnry y/S Bccausc instruments that rely on disk access suefc as hard cfisk drives arcsusceptible to vibration, they Arc often unsuitablc lot ou-rx>ard neasuicments. MEMORY HiCORpER* artfj)rcfcraMc for on-board fcviing Wyaasc ihey writc data to solid-state rnuioty ^'[:- :-n moving parts. Yo*i cuti lAck up data lo a PC Card or USB ston%t*...

Open the catalog to page 4

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:6.00pt "Franklin Gothic Medium", sans-serif; } .font1 { font:21.00pt "Franklin Gothic Medium", sans-serif; } .font2 { font:22.00pt "Impact", sans-serif; } .font3 { font:4.00pt "Times New Roman", serif; } .font4 { font:7.00pt "Times New Roman", serif; } .font5 { font:8.00pt "Times New Roman", serif; } .font6 { font:9.00pt "Times New Roman", serif; } .font7 { font:10.00pt "Times New Roman", serif; } .font8 { font:11.00pt "Times New Roman", serif; } .font9 { font:12.00pt "Times New Roman", serif; } .font10 { font:13.00pt...

Open the catalog to page 5

7 Accurately capture waveforms with diuerse parameters - Advanced trigger fonction - Friggerdurinqcapturingandsearchallercapturing Selmultipletriggersonasinglechannel The trigger fmiction a!k)w\ you lo sel diverse j>anu»ctcrs to dclccl a particular wavcforni anomal)1 duriiig capturing* Sdting the pre-frigger nxxfc allows you to moi lit or the pre-trigger wasefonn. This ts use fui for anary/ing the cause of the anomaly On ibe other hanA the search fonction allows you to dc(cct an anom-*ry aiter ail data is captured. This allows you to search for and display an anomaly in the saine manner as with...

Open the catalog to page 7

Convert the time domain to the frequency domain for analysis - FFT analysis function - FFT analysis function time oxmafi 1 lie single-chanu cl FFT function is used in speetnini analysis. The IWO-channcl FFT function aoalyzes transfer fonctions. The octave analysis tune bon is used in acoustic analysis. The signal source for FFT analysis is a section obtaincd froui the wavcfbrms captured in the MEM function (the required muubcr of pices of data for FFT analysis arc 1000 to 20,000 points). The calcult ion specd for the \ame condition (wlicn perfonning the niosi tintc-eortsuniing r:.-."-- ■■ ; is...

Open the catalog to page 8

SpectTy an analyse point Perlorm FFT calculation on the waveform from theMEM function Whcn pcrforming IF 1 analysis on the data obtaincd by measurement with the MEM Function, you can use the jog shuttlc to specify an analysis point and view the calculation rcsults on the samc screen. Unlikc with the convcntional 885S tnd 8841 niodcls, you do not need to switch between the MEM function and FFT functioii screens to set the starting point of calculation. Furthermorc* tl*c display oi Un Data" obtained by iikcasurakcnt with Ihc MEM function and tl*e calculation rcsulls of "Storagc WavcfornT on the...

Open the catalog to page 9

HIOKI 8860-50/8861-50 MEMORY HiCORDER-10

1c Remote control with the Internet browser - LAN/USB. calculation fonction - ■ Rnttc cintrai aid ai ton» tic sami (o a shared loMer The 8860 sries allows for remole control using the Internet browser on the computer. Whcu you remisier access to a sliarcd foldcr on a computer on the network, you cm store m\d Uwul tUta (o and from the shared foldcr on me 8860-60 or the 8861-50 file se reu ■ To jetess the shared falder: Eiflr駮 r bcel mm: ccf tbr compas: en ihc hic «iren of the 8860-60. d*t tkt ttiet lime lad tauwad m ٛe jttounl firid, t*i (heo sektt the jliri yen winl lu -liir ■ USB Wouse and keyboard...

Open the catalog to page 10

HIOKI 8860-50/8861-50 MEMORY HiCORDER-11

table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial Black", sans-serif; } .font1 { font:4.00pt "Franklin Gothic Medium", sans-serif; } .font2 { font:10.00pt "Franklin Gothic Medium", sans-serif; } .font3 { font:21.00pt "Franklin Gothic Medium", sans-serif; } .font4 { font:4.00pt "Tahoma", sans-serif; } .font5 { font:7.00pt "Times New Roman", serif; } .font6 { font:8.00pt "Times New Roman", serif; } .font7 { font:9.00pt "Times New Roman", serif; } .font8 { font:10.00pt "Times New Roman", serif; } .font9 { font:11.00pt "Times New Roman", serif; } .font10...

Open the catalog to page 11

All HIOKI E.E. CORPORATION catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list