*mydirectindustry

Catalogs
HIOKI E.E. CORPORATION
General Catalog (2013)

General Catalog (2013)

Product catalog summary

Overview: The 2013 Electrical Measuring Instruments General Catalog by Hioki provides comprehensive information on various measuring instruments, including recorders, data loggers, component measuring instruments, and more. The catalog is structured to help users find the right instrument for their application by categorizing products based on their functions.

Specifications: The catalog details measurement accuracy for digital instruments and measurement tolerance for analog instruments. Full-scale (f.s.) value, digital resolution (dgt.), and reading value (rdg.) are defined to ensure clarity in specifications. Dimensions and mass are provided in mm, excluding protrusions.

Safety Standards: The catalog emphasizes the importance of adhering to IEC 61010 safety standards, categorizing electrical environments from CAT I to CAT IV. It warns against using lower-category instruments in higher-category environments to prevent accidents.

CE Mark: Products with the CE mark comply with European Community directives for electrical safety, including the Low Voltage and EMC directives.

Product Highlights: The MEMORY HiCORDER MR8740 and MR8741 are featured, offering high-speed, multi-channel measurement capabilities. The MR8740 supports up to 54 channels, while the MR8741 supports up to 16 channels. Both models offer various input modules for different measurement needs.

Measurement Capabilities: The catalog outlines the measurement capabilities of different instruments, including voltage, current, frequency, power, and more. It also details the accuracy and resolution of these measurements.

Accessories and Options: A range of accessories and options are available, including connection cords, logic probes, and clamp sensors, to enhance the functionality of the measuring instruments.

Environmental and Quality Certifications: Hioki is certified under ISO 14001 for environmental management and ISO 9001 for quality management, ensuring high standards in product design, manufacturing, and service operations.

Voltage Measurement Specifications: Input connectors are isolated BNC with an impedance of 1 MΩ and capacitance of 40 pF. The maximum rated voltage to earth is 300 V AC/DC. The measurement range is from 5 mV to 20 V per division across 12 ranges, with a full scale of 20 divisions. The highest sampling rate is 2 MS/s for simultaneous sampling in 2 channels. Accuracy for DC amplitude is ±0.2% of full scale, and frequency characteristics range from DC to 200 kHz ±3 dB.

16ch Scanner Unit 8958: This unit supports 16 channels for voltage and temperature measurement using thermocouples. The input connectors are screw-type terminal strips. Voltage measurement ranges from 5 mV to 2 V per division, with a full scale of 20 divisions. Temperature measurement ranges depend on the sensor input range, with thermocouple ranges specified for types K, J, E, T, N, R, S, B, and W. The data refresh rate varies from 50 ms to 1.4 s depending on the digital filter setting.

DC/RMS Unit 8959: Features 2 channels for voltage measurement with isolated BNC connectors. The measurement range is 5 mV to 20 V per division, with a full scale of 20 divisions. The highest sampling rate is 1 MS/s. DC amplitude accuracy is ±0.4% of full scale, and RMS amplitude accuracy is ±1% of full scale for DC and 20 Hz to 1 kHz.

Strain Unit 8960: Designed for distortion measurement with 2 channels. Suitable for strain gauge converters with bridge impedance from 120 Ω to 1 kΩ. The measurement range is 20 με to 1000 με per division, with a full scale of 20 divisions. The highest sampling rate is 200 kS/s. DC amplitude accuracy after auto-balancing is ±(0.4% of full scale +2 με).

High Voltage Unit 8961: Supports 2 channels for voltage measurement with a range of 1 V to 50 V per division. The maximum allowable input is 1000 V DC. The highest sampling rate is 2 MS/s, and DC amplitude accuracy is ±0.25% of full scale.

Memory HiCorder MR8847 Series: Offers memory capacities from 64-Mega word to 512-Mega word. Features high-speed sampling up to 20MS/s with isolated inputs. The unit supports 16 analog and 16 logic channels, expandable to 64 logic channels. It includes a 10.4-inch TFT color LCD and supports multiple languages. External interfaces include LAN and USB ports.

Input Units for MR8847 Series: Various units are available, including Analog Unit 8966, Temperature Unit 8967, and DC/RMS Unit 8972, each with specific measurement functions and ranges. The Analog Unit 8966 supports voltage measurement with a range of 5 mV to 20 V per division and a highest sampling rate of 20 MS/s.

Overview: The document provides detailed specifications and functionalities of various measurement units and recorders, including logic units, high-resolution units, strain units, frequency units, current units, and memory recorders. It also covers software applications for data analysis and waveform processing.

Specifications: Each unit is described with its measurement functions, number of channels, input connectors, measurement range, accuracy, frequency characteristics, and additional features. For example, the Logic Unit 8973 supports 16 channels and uses Mini DIN connectors, while the High-Resolution Unit 8968 offers 2 channels for voltage measurement with isolated BNC connectors.

Measurement Units: The document details various units such as the Strain Unit 8969 for distortion measurement, the Frequency Unit 8970 for voltage input-based frequency measurement, and the Current Unit 8971 for current measurement with optional sensors. Each unit's specifications include measurement range, accuracy, and additional functionalities like low-pass filters and input coupling options.

Software Applications: The MEMORY HiVIEWER and WAVE PROCESSOR software enable data analysis and waveform processing on Windows computers. They support functions like waveform display, conversion to CSV format, and comprehensive search capabilities. The software is compatible with specific MEMORY HiCORDER models and offers features like printing and data export.

Recorders: The document describes the MEMORY HiCORDER 8826, which supports simultaneous sampling and recording of 32 analog and 32 logic channels. It features a high-resolution display, large memory capacity, and built-in thermal printer. The MICRO HiCORDER models 8205-10 and 8206-10 offer easy data recording with broad functionality, including AC/DC voltage and current measurement.

Accessories and Options: Various accessories and options are listed, such as clamp-on sensors for current measurement and recording paper for data printouts. The document also mentions the need for optional input modules for the main unit 8826 to operate.

Overview: This document provides technical specifications and options for various connection cords, memory recorders, and related accessories used in low voltage applications up to 300V. It includes details on different models, their capabilities, and compatible accessories.

Specifications:

Connection Cord L9790: Designed for low voltage applications, compatible with alligator and grabber clips.
Memory HiCORDER MR8875: Requires optional input modules and cords. Features include up to 16 analog channels, high-speed recording, and real-time data saving to SD cards.
Memory HiCORDER MR8880-20: Offers 4 isolated analog channels, suitable for harsh environments, and supports high-speed and real-time recording.
PEN RECORDER PR8111/PR8112: Portable pen recorders with self-balancing recording, suitable for field use with multiple power options.

Key Features:

Compatibility with various input modules and accessories for tailored measurement solutions.
Robust design for in-vehicle and field testing, withstanding vibrations and extreme temperatures.
Multiple power supply options including AC adapter, battery pack, and external DC power.

Accessories and Options:

Various connection cords and clips for different applications.
Optional printer units and recording paper for data documentation.
Carrying cases and protective accessories for enhanced portability and durability.

Recommendations:

Ensure compatibility of cords and modules with the main unit for optimal performance.
Consider environmental conditions and power supply options when selecting equipment for field use.

Specifications Overview:

Voltage Measurement: Ranges from 10 mV to 100 V with a maximum resolution of 500 nV. Channels are isolated from each other and from the chassis.
Temperature Measurement: Supports thermocouples (K, J, E, T, N, R, S, B, W) from -200°C to 2000°C with a resolution of 0.01°C. Pt 100 and JPt 100 sensors measure from -200°C to 800°C, not isolated between channels.
Resistance Measurement: Ranges from 10 Ω to 200 Ω with a resolution of 0.5 mΩ, not isolated between channels.
Humidity Measurement: 5.0 to 95.0% rh with a resolution of 0.1% rh, not isolated between channels or from the chassis.
Pulse and Digital Input: 8 channels, selectable for pulse or digital input, not isolated, with a common ground.

Recording and Data Storage:

Recording intervals range from 10 ms to 1 hour with 19 selections.
Data storage options include internal memory, CF card, or USB memory.
LAN and USB interfaces support data acquisition and transfer.

Power Supply and Accessories:

AC adapter and battery pack options available, with continuous use times varying based on configuration.
Includes accessories such as an operating manual, measurement guide, and data collection software.

Additional Features:

Real-time data saving, numerical and waveform calculations, and a 5.7-inch TFT color display.
Supports up to 600 channels with modular expansion.

Overview: This document provides detailed specifications and options for various power measuring instruments, including the Power Quality Analyzer models PW3198 and 3197, and the Power HiTESTER 3193-10. It outlines the capabilities, measurement types, and accessories available for these devices.

Specifications:

Measurement Line Types: Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire systems.
Voltage Range: Up to 600 V AC for standard measurements, with transient measurements up to 6 kV peak.
Current Range: 500 mA to 5 kA AC, depending on the current sensor used.
Basic Accuracy: Voltage accuracy is ±0.1% of nominal voltage, and current accuracy is ±0.2% rdg. ±0.1% f.s. plus sensor accuracy.
Power Measurement: Includes active, reactive, and apparent power, with integration capabilities.
Frequency Range: Fundamental frequency measurements from 50 Hz to 400 Hz, with harmonic analysis up to the 50th order.

Features:

Data Recording: Continuous gapless recording with high accuracy, capable of storing data for up to 55 weeks.
Interfaces: Includes LAN, USB, and SD card interfaces for data transfer and remote operations.
Advanced Analysis: PQA-HiVIEW PRO software allows for detailed data analysis, report generation, and CSV format conversion.
Safety and Compliance: Devices meet IEC61000-4-30 Class A standards and are CAT IV 600V rated for safety.

Options and Accessories:

Current Sensors: Various clamp-on sensors available for different current ranges.
Adapters and Cables: Includes magnetic adapters, connection cables, and RS-232C cables for PC communication.
Power Supply: Devices can be powered via AC adapters or battery packs, with options for different regions.
Carrying Cases: Soft and hard cases available for portability and protection.

Applications: These instruments are designed for comprehensive power quality analysis, capable of monitoring inrush current, voltage swells, dips, and transient overvoltages. They are suitable for both field and laboratory use, providing detailed insights into power consumption and quality issues.

Overview: The document provides detailed specifications and functionalities of various power measuring instruments, focusing on models like the POWER ANALYZER 3390, POWER HiTESTER 3332, 3333, and 3334. It includes information on measurement capabilities, accuracy, interfaces, and additional options.

Specifications: The POWER ANALYZER 3390 series offers high precision with ±0.1% accuracy across all ranges, advanced motor analysis, and high-speed harmonic analysis. It supports various measurement lines and parameters, including voltage, current, power, and efficiency. The instruments are equipped with interfaces like LAN, USB, and RS-232C.

Measurement Ranges: Voltage ranges from 15V to 1500V, and current ranges from 1mA to 500A, depending on the sensor used. Power measurement ranges from 6W to 2.25MW. The frequency range for synchronization is 0.5 Hz to 5 kHz.

Accuracy and Functions: The document highlights the basic accuracy of ±0.05% for voltage, current, and power measurements. Additional functions include waveform peak measurement, efficiency measurement, and noise analysis using FFT technology.

Power Supply and Dimensions: The instruments operate on 100 to 240 V AC power supply and have varying dimensions and mass, with the POWER ANALYZER 3390 being 340 mm wide, 170 mm high, and 157 mm deep, weighing 4.8 kg.

Accessories and Options: Standard accessories include instruction manuals, power cords, and connectors. Optional accessories like current sensors, voltage cords, and carrying cases are available for enhanced functionality.

Additional Models: The POWER HiTESTER 3332 and 3333 series are designed for high sensitivity and accuracy, suitable for production and inspection lines. They offer features like integration measurement, waveform output, and analog output.

Conclusion: The document provides comprehensive technical details for selecting and utilizing power measuring instruments, emphasizing accuracy, versatility, and advanced analysis capabilities.

Overview: The document provides detailed specifications and options for various LCR meters and related equipment, focusing on high-speed and high-precision measurements. It includes information on measurement parameters, accuracy, frequency ranges, and available accessories.

Key Specifications:

Measurement Speed: High-speed measurements as fast as 5ms for certain models.
Frequency Range: Wide test frequency range from 42Hz to 120MHz, depending on the model.
Accuracy: Basic accuracy of ±0.08% for impedance measurements.
Measurement Parameters: Includes |Z|, θ, C, L, D, Q, R, and more, with specific ranges for each parameter.

Equipment and Accessories:

Probes and Fixtures: Various probes and test fixtures are available, such as the FOUR-TERMINAL PROBE (DC to 100 kHz) and SMD TEST FIXTURE (DC to 120 MHz).
DC Bias Units: Options for DC bias voltage and current units are provided.
Interfaces: GP-IB and RS-232C interfaces are available for data communication.
Printers and Adapters: External printers and AC adapters are offered as optional accessories.

Additional Features:

Comparator Functions: Allows setting upper and lower limits with output levels (Hi, In, Lo).
Display: LED and LCD displays with full digit counts for clear measurement readings.
Power Supply: Selectable AC power supply options ranging from 100V to 240V.

Usage Recommendations: The document suggests selecting appropriate probes and fixtures based on specific measurement needs and highlights the importance of using optional interfaces for enhanced functionality.

Overview: The document provides detailed specifications and features of various electronic measuring instruments, including resistance meters and battery testers, designed for high precision and efficiency in automated systems.

Specifications: The resistance meters, such as the RESISTANCE HiTESTER RM3543 and RM3542, offer a wide measurement range from 0.1 μΩ to 110 MΩ with high accuracy and speed. They include advanced functions like temperature correction, self-calibration, and data export capabilities. The BATTERY HiTESTER models, including BT3563 and BT3562, are designed for high-speed testing of battery packs, measuring internal resistance and voltage with high accuracy.

Features: Key features include high-speed measurements, multiple checking functions for reliable results, and various interfaces like RS-232C and GP-IB for connectivity. The instruments support automated systems with features like comparator functions, statistical calculations, and auto-memory.

Accessories and Options: The document lists various accessories and optional components, such as different types of leads, test fixtures, and connection cables, which are not included with the main units and must be purchased separately based on application needs.

Applications: These instruments are optimized for use in production lines, particularly for testing high-voltage battery packs and small battery packs in mobile devices. They are also suitable for routine maintenance and testing of electrical devices and systems.

Recommendations: Users are advised to select appropriate measurement probes and test fixtures for their specific applications. The document emphasizes the importance of establishing comparison threshold values based on the battery manufacturer, type, and capacity.

Overview: The document provides detailed specifications and functionalities of various electronic measuring instruments, including digital multimeters (DMMs), power source units, and ultra-insulation meters. It highlights their measurement capabilities, accuracy, and additional features.

Specifications: The document outlines the specifications for different models of DMMs, including DC and AC voltage ranges, current measurement capabilities, resistance measurement, and frequency characteristics. It also details the accuracy levels and resolution for each measurement type.

Measurement Functions: The instruments offer various measurement functions such as voltage, current, temperature, and resistance measurements. They include features like zero adjustment, overflow display, and USB communication for enhanced usability.

Power Supply and Accessories: The instruments are powered by AC adapters or batteries, with specific models supporting different voltage inputs. Accessories such as test leads, fuses, and instruction manuals are included to facilitate operation.

Additional Features: Some models include high-speed comparators, RS-232C interfaces, and external control I/O for integration into production lines. The document also mentions options for clamp-on probes and connection cables for extended functionality.

Power Source Units: The SM7860 series supports multi-channel systems with dual-line output voltage settings, suitable for MLCC leakage current measurement. It offers high output voltage and current capabilities, with options for positive and negative polarities.

Ultra-Insulation Meters: The SM-8200 series provides ultra megohm measurement with digital/analog display capabilities. It supports various sample types and offers high accuracy and measurement speed.

Conclusion: The document serves as a comprehensive guide to the specifications and functionalities of electronic measuring instruments, providing essential information for selecting and using these devices in various applications.

Overview: The document provides detailed specifications and operational guidelines for various electronic measuring instruments, focusing on resistance and current measurement devices. It includes information on interfaces, measurement ranges, accuracy, and compliance with international standards.

Specifications: The document outlines the specifications for different models, including the DSM-8542, PSU-8541, and SM-8200 Series, which are not CE-marked. Key specifications include ultra-high resistance measurement ranges from 1 × 10³ to 3 × 10¹⁶ Ω, super low current measurement capabilities from 0.1 fA to 10 mA, and applied voltage ranges from 0.1 to 1,000 V. The document also details the accuracy and resolution for various current measurement ranges.

Procedures and Functions: The document describes procedures for testing capacitance and insulation resistance, as well as the use of various electrodes for different measurement types. It highlights the programming functions available, such as the ability to store up to 1,000 data points and the use of a histogram display for results.

Interfaces and Power Supply: The instruments support multiple interfaces, including GP-IB, RS-232C, and a handler interface. Power supply options are specified as 100V AC with factory options for 115V, 220V, and 240V.

Safety and Compliance: The document emphasizes compliance with safety standards such as IEC 60601-1 for medical electrical equipment and IEC 61010-1 for electrical equipment for measurement, control, and laboratory use. It also notes the importance of using an isolation transformer when measuring leak current for medical devices.

Accessories and Options: Various accessories are listed, including power cords, instruction manuals, and specific electrodes for different measurement needs. Optional items like shielding boxes and verification fixtures are also mentioned.

Key Limitations: The document notes that certain interfaces cannot be installed simultaneously, such as the RS-232C and LAN interfaces. It also specifies that certain models are not CE-marked, which may affect their use in specific regions.

Overview: This document provides detailed specifications and operational guidelines for various electrical safety test instruments and environmental measuring devices. It includes information on insulation resistance and voltage withstand testing, data loggers, and non-contact temperature measurement tools.

Specifications:

Comparator Setting: Allows selection of lower limit values via key press or RS-232C interface. Judgement process includes PASS/FAIL criteria based on measurement values.
Test Duration and Delay Timers: Configurable test duration from 0.5 to 99 seconds and delay time from 0.1 to 99 seconds.
Analog Output: DC +4 V full scale.
Interfaces: RS-232C for measurement value printing and external I/O for control input and judgment results.
Power Supply: 100 to 240 V AC, 50/60 Hz.
Dimensions and Mass: Various dimensions and weights are specified for different models.

Procedures:

Insulation and Withstanding Tests: Conducted using programmable testing with full remote control capabilities. Testing voltage ranges from 0.2 kV to 5.00 kV AC/DC.
Environmental Measurements: Includes temperature and humidity data loggers with various sensor options and data transfer capabilities to PCs.

Standards and Recommendations:

Devices are designed to comply with various safety standards for electrical testing.
Automation features are included to enhance testing efficiency and accuracy.

Accessories and Options:

Includes power cords, instruction manuals, and optional remote control boxes and high voltage scanners.
Data management software and various RS-232C cables are available for enhanced functionality.

Key Features:

Programmable testing with up to 32 files and 50 steps per file.
Accurate voltage generation using PWM control method.
Non-contact temperature measurement with infrared thermometers.

Overview: The document provides detailed specifications and functionalities of various environmental measuring instruments, including temperature testers, sound level meters, illumination meters, and magnetic field testers. It outlines the measurement ranges, accuracy, response times, power supply options, and additional features for each device.

Temperature Measurement Devices:

FT3700 and FT3701: These devices measure temperatures ranging from -60.0 to 760.0°C with a basic accuracy of ±2°C or ±2% of the reading. They feature a two-beam laser marker, continuous measurement mode, and various alarm functions. The FT3700 has a distance-to-spot ratio of 12:1, while the FT3701 has a ratio of 30:1.
HiTESTER 3441 and 3442: These are compact devices with a measurement range of -100°C to 1300°C, featuring auto power save and low battery warnings. The 3442 model is waterproof.

Sound Level Meters:

FT3432: Measures sound levels with a range of 30 dB to 130 dB and features a 1/2-inch electret condenser microphone. It supports various measurement types like sound exposure level and maximum sound level.

Illumination Meters:

LUX HiTESTER 3423: Measures illumination from 20 to 200,000 lx with an accuracy of ±4% of the reading. It features a silicon photodiode receptor and allows remote measurement with a separate sensor.

Magnetic Field Testers:

FT3470-51 and FT3470-52: These devices measure magnetic flux density across three axes and comply with ICNIRP 2010 guidelines. They offer analog and pulse output functions and are dustproof and drop-proof.

Additional Features and Accessories: The document lists various accessories such as carrying cases, batteries, and optional software for data analysis. It also highlights the rugged design and ease of use of these instruments, making them suitable for various environmental and industrial applications.

Specifications Overview:
The document provides detailed specifications for various clamp testers and current meters, focusing on their capabilities, accuracy, and physical dimensions. Key models include the CT6500, 3280-10, 3280-20, 3281, 3282, and others, each designed for specific current and voltage ranges.

Model CT6500:
- Primary current rating: AC 500 A
- Maximum input: 600 A continuous (45 to 66 Hz)
- Output voltage: AC 1 mV/A
- Amplitude accuracy: ±1.5 %rdg.±0.03 %f.s.
- Frequency characteristics: ±5% or better from 40 Hz to 1 kHz
- Max. rated voltage to earth: 600 V rms
- Core jaw diameter: φ46 mm (1.81 in)
- Dimensions: 78mm W x 152mm H x 42mm D, 360 g
- CAT III 600V

Clamp Testers:
- Models include 3280-10, 3280-20, 3281, 3282, 3285, and others.
- Current ranges vary from 100 A to 2000 A, with different jaw diameters and weight specifications.
- True RMS and Mean measurement capabilities are highlighted for accurate readings.
- Some models offer additional features like resistance measurement, waveform analysis, and harmonic analysis.

Performance and Accuracy:
- Amplitude accuracy typically ranges from ±1% to ±3% depending on the model and measurement type.
- Frequency characteristics are generally stable across a wide range, from 40 Hz to 1 kHz or more.
- Models are designed to handle various environmental conditions, with specific ratings for voltage to earth and external magnetic field effects.

Physical and Operational Features:
- Core jaw diameters range from 33 mm to 55 mm, accommodating different conductor sizes.
- Dimensions and mass vary, with lighter models designed for portability and ease of use in tight spaces.
- Power supply options include batteries and AC adapters, depending on the model.

Additional Features:
- Some models include features like auto power off, display hold, and maximum value hold.
- Accessories such as test leads, carrying cases, and instruction manuals are typically included.

Conclusion:
The document provides comprehensive technical details for a range of clamp testers and current meters, emphasizing their measurement capabilities, accuracy, and suitability for various electrical testing applications.

Overview: The document provides detailed specifications and functionalities of various HiTESTER models, including digital clamp meters, power meters, and multi-meters. It outlines the measurement capabilities, accuracy, and additional features of each device, catering to different electrical testing needs.

Specifications:

Digital Clamp On HiTESTER 3291-50: Measures AC current with auto-ranging capabilities from 30.00 mA to 1000 A. It features a reversible LCD display, filter options, and a sampling rate of up to 1.1 seconds. The device is powered by a CR2032 battery and includes a carrying case and strap.
Clamp On Leak HiTESTER 3293-50: Designed for CAT III 600 V and CAT IV 300 V environments, this tester offers similar measurement ranges and features as the 3291-50, with a focus on leak detection.
Clamp On AC/DC HiTESTER 3290/3290-10: Offers multiple measurement methods including DC, AC+DC RMS, and peak value measurement. It supports various sensors for measuring up to 2000 A and provides simultaneous output options.
Clamp On Power HiTESTER 3286-20: Functions as a single-phase power meter with capabilities to measure voltage, current, power, and phase angles. It supports three-phase measurements and offers a range of power measurement options.

Measurement Capabilities:

Voltage and Current Measurement: Devices offer a range of voltage and current measurement capabilities, with specific models providing true RMS readings and peak value displays.
Frequency and Harmonics: Frequency measurement ranges from 1 Hz to 1 kHz, with some models offering harmonic level measurements up to the 20th order.
Data Storage and Output: Some models include data storage capabilities for peak, integral values, and operating time rates, along with various output options for waveform and RMS values.

Additional Features:

Safety and Durability: Devices are designed with safety standards such as CAT III and CAT IV ratings, and some models are drop-proof with durable casings.
Accessories: Each device comes with specific accessories like carrying cases, straps, and instruction manuals to enhance usability and portability.

Conclusion: The document provides comprehensive information on the specifications and functionalities of HiTESTER devices, highlighting their suitability for various electrical measurement tasks in industrial and field settings.

PENCIL HiTESTER 3246-60
Compact and lightweight, this tester features better contact test leads with a 15mm tip pin length and gold plating. It is only 9.5 mm thick and weighs 60 g. It includes full auto-ranging and automatic power-saving functions, with overload protection up to 500 V for resistance or continuity functions.

CARD HiTESTER 3244-60
Designed for safety with non-metallic contact, this tester is optimized for 400 V AC circuits and can capture voltage values of covered electric wires. It is rated CAT III 600 V and CAT VI 300 V.

SAFETY HiTESTER 3258
Suitable for industrial power lines, this tester includes a current-limiting resistor and a 1000 V withstanding fuse to prevent short-circuit accidents. It is dust-proof and splash-proof (IP54) and can measure AC load current with optional clamp-on probes. It is rated CAT II 600 V and CAT III 300 V.

DIGITAL HiTESTER 3255-50
This tester features a terminal shutter interlock mechanism for safety and can check for live lines easily. It is rated CAT II 1000 V and CAT III 600 V.

DIGITAL HiTESTER 3256-50 and 3257-50
The 3256-50 is an average rectified type with overload protection up to 600V, while the 3257-50 is a true RMS type with overload protection up to 1000V. Both models require test pin sleeves for CATIII environments.

HiTESTER 3030-10
A basic tester with improved safety features, it complies with EN61010 and is rated CAT III 600V. It includes a drop-proof design and an LED check function.

HIGH VOLTAGE INSULATION HiTESTER 3455
Capable of measuring insulation resistance up to 5 TΩ with a maximum test voltage of 5 kV. It includes a wide testing voltage range and built-in memory for data storage.

VOLTAGE DETECTOR 3120
This detector provides both visual and audible voltage detection indication and is rated CAT IV 600 V.

PHASE DETECTOR 3129 and 3129-10
These detectors use non-metallic contact for optimal safety and can detect phase and live wires. The 3129-10 is rated CAT IV 600 V.

INSULATION TESTER IR4057-20 and IR4056-20
These testers offer stable digital readings and are drop-proof. They include a built-in AC/DC voltage meter and comply with EN61557.

Specifications Overview
The document provides detailed specifications for various measurement instruments, including insulation resistance meters, earth testers, optical meters, and noise loggers. Key specifications include testing voltages, measurement ranges, accuracy, power supply requirements, and compliance with safety standards such as EN61010 and EMC EN61326.

Insulation Resistance Meters
These meters feature a single range with luminous scales for visibility in low light. They are drop-proof and comply with EN61557 standards. The meters offer a 3-range testing voltage and continuity check with a 3Ω range via 200mA testing. Accessories include test leads, shoulder straps, and alkaline batteries.

Earth Testers
The Earth HiTESTER 3151 measures grounding resistance and voltage with a range of 10Ω to 1000Ω. It offers both two-wire and three-wire measurement methods and selectable measurement frequencies to reduce harmonic influence. Accessories include auxiliary earthing rods and measuring cables.

Clamp On Earth Testers
Models FT6380 and FT6381 provide a wide measurement range for earth resistance and current. They feature a slim jaw design for easy clamping and real-time data transfer via Bluetooth for the FT6381 model.

Optical Meters
The LED Optical Meter TM6101 measures optical characteristics of LEDs with high precision and speed. It includes functions for illuminance, chromaticity, and color rendering index, with interfaces for USB connectivity.

Noise Loggers
The Noise HiLOGGER 3145-20 and Noise Search Tester 3144-20 identify noise voltage in communication and power lines. They feature logging functions, real-time monitoring, and various input configurations. Accessories include voltage sensors and application software.

Additional Features and Options
Various models offer additional features such as automatic report generation, real-time data transfer, and compliance with CAT safety standards. Options include test leads with remote control switches, magnetic adapters, and carrying cases.

Catalog excerpts

Electrical Measuring Instruments General Catalog Recorders Power Electronic Field Recorders / Data Loggers / Remote Measurement System / Component Measuring Instruments / Signal Sources / Safety Standards Measuring Instruments / Power Measuring Instruments / Clamp on Sensors / Measurement in Telecommunications / Environmental Measuring Instruments / Digital Multi Meters / Insulation and Earth Testers / Clamp Meters / Meter Relays / Automatic Testing Equipment

Open the catalog to page 1

About the Catalog Searching for product pages and notes ... Products in this catalog are grouped according to functions so you can easily find the right instrument for your application by referring to the list of product groups in the table of contents on the first page, and moving directly to the indicated section. Dimensions and mass: Exterior dimensions exclude protrusions, and are given in order of width(W), height(H), and depth(D), in mm units. Indicated weight represents an approximation of the mass of the main unit only, not including case, accessories, etc. HIOKI is certified under the...

Open the catalog to page 2

New Products MEMORY HiCORDER Fully Integrate into High-Speed, Multi-channel Measurement Systems DVM UNIT MR8990 Digital Voltage Meter The MR8740 uses a two-block internal architecture, essentially giving it the capabilities of two MEMORY HiCORDERs. Measure minute changes in voltage at a high level of precision. Simultaneous measurement of all channels--rather than scanner-type measurement--dramatically reduces cycle times. High-speed isolated measurement 20 MS/s isolated sampling Number of input units Simultaneous 20M sampling within the same block Systems Integration When using analog units...

Open the catalog to page 3

New Products CLAMP ON POWER LOGGER Identify Your Power Condition To Reveal Energy Saving Ideas Now with QUICK SET Convenience The Best Choice Available Reliable measurements start with proper wiring. The QUICK SET function guides you in making the right connections. SPECIFICATIONS Measurement line type 50/60 Hz, Single-phase 2-wire (1P2W: 1 circuit/2 circuits/3 circuits) Single-phase 3-wire (1P3W, 1P3W1U) Three-phase 3-wire (3P3W2M, 3P3W3M) Three-phase 4-wire (3P4W) Leak current/load current only: 1 to 3 channels Voltage, current, frequency, active power (for consumption and Measurement regeneration),...

Open the catalog to page 4

New Products DIGITAL MULTIMETER Speedy Performance of Professional Testing Two models provide high accuracy and fast response Current measurement available with optional clamp. Basic Accuracy ■ 60,000 count, 5-digit display of high resolution measurements ■ Remove harmonics with low pass filter (to measure the fundamental wave component of inverters) ■ Measure current with clamp sensors (DT4281) ■ PC data management via USB (option) ■ Wide operating temperature range of -15℃ to 55℃ ■ Built-in terminal shutter mechanism prevents accidents SPECIFICATIONS DT4281 DT4282 60.000 mV to 1000.0 V, 6ranges...

Open the catalog to page 5

New Products RESISTANCE METER A New Standard in Resistance Testing Simple ohmmeters High-precision portable ohmmeter suits both manual operation and integration with automatic lines n High-precision specs in a compact package Measure from 0.000 mΩ (@ 300 mA) to 3.5 MΩ n Production floor quality pass-fail judgments with LED COMPARATOR ATTACHMENT L2105 (option) and crystal clear audio signals n Integrates into various automatic lines, with NPN/PNPcompatible external I/O support (Model RM3544-01) Applications Windings (motors, solenoids, choke coils, transformers) Power contacts (contacts, wire...

Open the catalog to page 6

Contents New products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.New1 to New4 About the Catalog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.1 Model Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.3 Recorders, Memory Recorders Power Measuring Instruments Electronic Measuring Instruments P.25 to 37 Safety Standards Measuring Instruments P.38 to 40 Environmental Measuring Instruments P.41 to 45 Clamp Sensors Clamp Testers Field Measuring Instruments...

Open the catalog to page 7

Model Index 1000 or later ...Peripherals 5000 or later ...Leak current /LED optical meter /Signal sources 2000 or later ...Meter relays

Open the catalog to page 8

Recorders, Memory Recorders Recorder, Memory Recorder Index For simultaneous recording of multiple signals Recorders, Memory Recorders 20MS/sec, Fully Integrate into High-Speed, Multi-channel Measurement Systems MR8740: Block I ; Analog 32ch, Logic 8ch Block II ;: Analog 22ch, Logic 8ch MR8741: Analog 16ch, Logic 16ch For simultaneous recording of multiple signals 1 MS/sec. (32 ch) 4 MW (1 ch) memoryexpandable up to 4 times 12-bits A/D resolution . . . . . . . . . . . . . . . p.10 15 ch to 600 ch isolated input Minimum 10 ms interval LAN/USB PC based data acquisition . . . . . . . . . . . . ....

Open the catalog to page 9

MEMORY HiCORDER Oscilloscope and Data Logger - Record Waveforms in Any Situation A faster CPU greatly enhances instrument operability and response. Multi-channel logging on up to 64 or 128 channels (Use with the 8958) 20 MS/s high-speed sampling (Use with the 8956) Various interfaces built-in: LAN/USB/PC-card slot Supports the new high-voltage input module for measuring high voltage directly. Recorders, Memory Recorders The MEMORY HiCORDER 8860-50 and 8861-50 cannot operate alone. You must install one or more optional input modules in the unit. Note: Memory boards are not built-in as a standard...

Open the catalog to page 10

INPUT Units Dimensions and mass: approx. 170 (6.69in) W × 20 (0.79in) H × 148.5 (5.85in) D mm, approx. 290 g (10.2 oz) Accessories: None Dimensions and mass: approx. Dimensions and mass: approx. 170 (6.69in) W × 20 (0.79in) H × 148.5 (5.85in) D mm, approx. 310 g (10.9 oz) Accessories: None HIGH-RESOLUTION UNIT 8957 Measurement functions Number of channels: 2, for voltage measurement Isolated BNC connector (input impedance 1 MΩ, input capacitance 40 pF), Max. rated voltage to earth: 300 V AC, DC (with input isolated Input connectors from the unit, the maximum voltage that can be applied between...

Open the catalog to page 11

General Catalog (2013)

General Catalog (2013)

Catalog excerpts

All HIOKI E.E. CORPORATION catalogs and technical brochures