CLAMP ON POWER LOGGER PW3365-20 Power Meter Eliminate the risk of short-circuits and electrical accidents The world’s first instrument to offer no-metal-contact power measurement Free from the risk of short-circuit accidents since no metal comes into contact with energized parts, the Clamp On Power Logger PW3365-20 can measure voltage, current, and power right on the cable, letting you safely test in locations that were dangerous or even impossible in the past.

Safe, Easy, Voltage Measurement The PW3365-20’s dedicated voltage sensor delivers the world’s first no-metal-contact measurement. Free yourself from the risk of short-circuits by measuring right on the cable sheath without ever needing to touch metal to energized parts Measure both thick and thin cables Freely clip either horizontally or vertically Measure in potentially hazardous locations Locations without energized parts Locations with covered terminals Measure on the outside of cables Measure without removing the covers Locations with a risk of electric shock Measure at safer points How is...

Enlarged view of clamp Actual maximum size : φ30mm Actual minimum size : φ6mm Compatible conductor diameters SAFETY VOLTAGE SENSOR PW9020 Specifications Compatible conductor types Insulated wires* 1 In door PVC or metal parts Compatible conductor diameters Finished outer diameter φ6mm to φ30mm Effective measurement range ±1.5% rdg. ±0.2% f.s. (combined accuracy with PW3365-20)* 2 Accuracy combined with the PW3365-20 is within ±1.3% (at 50/60Hz, f.s. input) Maximum rated voltage to earth Cord length Operating temperature and humidity Storage temperature and humidity Dielectric strength Applicable...

Configure Settings with Graphical, easy-to-understand guidance for connection procedures Quick Setup guides you through the process of setting up the instrument for measurement, right up to starting measurement, on the screen to simplify set work. Since any mistaken connections will trigger a FAIL message, the feature also helps prevent measurement mistakes. If you receive a FAIL result, the instrument will also indicate the location of the problem. Setup Flow (example: 3P4W) STEP1 Quick Set START / Choose the wire type Connect the voltage sensor Connect the clamp sensors Select the current range...

Review Results Display measured values as a graph and evaluate results at a glance Measured values can be displayed as a graph, which is convenient when using the instrument in power management applications. Since you can statistically review not only the measured value at that moment, but also measured values that have been recorded, it’s easy to check values on the spot. Demand Graph Display Read values at cursor Maximum Demand Values Display demand value trends It’s easy to check the maximum demand value and the time at which it occurred. Particularly useful in power management applications...

Save &Analyze Easily download and interpret data on a PC Download the measurement results to a computer via the power logger's LAN or USB interface or its SD card. Once data has been downloaded, it can be graphed easily with free software. For more detailed analysis, Hioki’s optional SF1001 application software is recommended. Storage media for data Available Recording Time Measurement Interval Loading data 10 seconds The SD port has a cover Save Time Stores up to one year’s data that is acquired at one minute intervals. Performance cannot be guaranteed on storage media other than SD cards sold...

Convenient Functions More Uses for the PW3365-20 The Hioki PW3365-20 is not just a power logger. Added-value features and functions let you meet many other electrical testing applications. Leakage Current Measurement Requires optional clamp-on leak sensor Measure power + 1-channel of leakage current Measure 3 channels of leakage current Leakage current results Example : 3P3W2M+1-channel leakage current Measure leakage current Power Source Power Source Measure power By capturing the RMS of the fundamental wave, you can also identify the leakage current of the 50/60Hz component. With the ability...

No dirt or moisture on insulated wire or voltage sensor Product guaranteed for one year Measurement Number of input channels Voltage: 3 channels / Current: 3 channels Simultaneous power/current measurement modes 1P3W+I : 1 power circuit and 1 current channel 3P3W2M+I : 1 power circuit and 1 current channel Voltage Current RMS value, fundamental wave value, waveform peak (absolute value), fundamental wave phase angle Active power, reactive power, apparent power, power factor, (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration,...

Screen display List Voltage, current, frequency, active/apparent/reactive power power factor, integrated power use, elapsed time RMS value, fundamental wave value, waveform peak, phase angle Per-channel and total active power, apparent power, reactive power,power factor Active energy, reactiv energy, recording start time recording stop time, elapsed time, energy cost Active power demand value, reactive power demand value power factor demand value Displays voltage and current waveform Enlarged view of 4 user-selected parameters For one selected measurement item displays maximum, average and minimum...

Current CLAMP Insulated conductor Insulated conductor CLAMP ON SENSOR 9694 Cord length 3 m (9.84ft) Connect with the 9695-02/-03, Output BNC terminal Cord length: 3 m (9.84ft) Primary current rating 5A AC 100A AC Accuracy Amplitude (45 to 66 Hz) / Phase (45 Hz to 5 kHz) ±0.3% rdg.±0.02% f.s. ±0.3% rdg.±0.02% f.s. ±0.3% rdg.±0.01% f.s. Within ±2° Within ±1° Within ±0.5° Frequency characteristic 40Hz to 5kHz Within ±1.0% Within ±1.0% Effect of external magnetic field with a magnetic field of 400 A/ m AC Equivalent to 0.1 A or less Equivalent to 0.1 A or less Equivalent to 0.1 A or less Effect of...