N40.3
8Pages

INTERKOPF” technology partnership

The shape makes the difference At their headquarters in Eislingen/Fils, HINTERKOPF, the long-established packaging specialist develops and builds machines that are in worldwide use for the fully-automated production of cans, tubes and sleeves made from aluminum and plastics. Besides printing, coating and washing machines the HINTERKOPF product range also comprises capping and trimming machines and last but not least necking machines for aluminum cans and bottles. In the necking process a can is given its final shape. In numerous steps the shoulder is formed, the edge is flanged, a thread...

N40.3 - maximized product output The advanced N40.3 necking machine sets new standards in terms of speed, precision, quality and its ease of operation and maintenance. In the N40-series machines N40.2 and N40.3 a variable stroke and a new concept enable highest production speed. With the necking machine N40.3, even complex shapes can be produced with up to 240 cans/min. The bearing arrangement of the machine, consisting of linear ball slides, makes the machine more precise than other machines on the market and more precise also than its predecessor model, the N30, despite its increase...

40 processing stations for individual shaping Higher demands in respect to value and differentiation of consumer products lead to increased requirements on the overall design and appearance of the product´s packaging. For the customers of HINTERKOPF, manufacturers of aluminum cans and bottles, this results in higher requirements on the decoration and in particular on the product shape. New market requirements not only demand the forming of can or bottle necks, but the respective body also has to be necked, for example by the formation of a characteristic “waist”. To do so, the body of the...

Flatshoulder rolling Length/ Diameter milling Curl rolling Curl milling Gorge rolling Empty Camera inspection Leak testing Unloading Empty Example for an arrangement of the work stations of the N40.3 necking machine. The configuration of the stations with tools depends on the manufactured product.

Necking Machine Variable stroke with optimum speed In order to create a can with a waist on the lower body, a large working stroke of the necking machine is needed. However, since all sorts of aerosol cans and bottles need to be shaped on this one necking machine, it does not always require the maximum stroke. HINTERKOPF therefore developed a variable stroke for the N40 machines, allowing the use of one single machine for shaping cylinders over their complete wall length or just for making the usual type of aerosol cans, each with its optimum speed. This way overall output is optimized and...

Technology and overall concept Besides rotation-symmetric necking processes, also asymmetric embossing processes of the cylinder wall of cans or bottles can be accomplished. An automatic quality check of the finished can by a camera system is of course available as an option, a tightness check of the product in one of the work stations is under consideration. Besides an extremely precise, fast and reliable mechanical machine base an advanced necking machine like the N40.3 requires much more: synchronized product handling including infeed and exit conveyors, the necking tools, the...

Technical data Characteristics Operating range Stations: 40 Can diameter: 35– 53 mm 45 – 74 mm Side view foundation plate on ground Weight: 20 000 kg without foundation plate Hinterkopf GmbH Gutenbergstrasse 5 D-73054 Eislingen Germany Tel. ++49(0)71618501-0 Fax ++49(0)71618501-10 info@hinterkopf.de www.hinterkopf.de 8 Information is subject to change. Side view foundation plate in g