GENERAL CATALOG OF FUSES
32Pages

HINODE ELECTRIC CO.,LTD. 1-18-9 Hokima, Adachi-ku, Tokyo 121-0064, JAPAN GENERAL CATALOG OF FUSES Are you sure you don't need a fuse? HINODE PROTECT FUSE HINODE PROTECT FUSES, highly trust worthy and with a proven track record, are used in nearly every industry.

Today's power devices are generally equipped their safety has improved greatly. However, extraordinary, unexpected "acc All means of protection adopted on design may become futile in cases •Errors in assembly work •Contamination with a foreign substance •Damage to semiconductors by disturbances such as heat or shock Before such accidents affect other chips or equipment, HINODE PROTECT FUSE will safely block off equipment as the last line of protection. What is the HINODE PROTECT FUSE? HINODE PROTECT FUSE is a fast-acting fuse that blocks off equipment in a few microseconds even in cases of...

When a short circuit occurs, an overcurrent*1 greatly exceeding the rated amperage flows in a circuit. This causes abnormal heat generation on the wiring pattern and parts and may lead to an accident such as ignition, fumes, or explosion. When a short-circuit current damages a component, Protecting semiconductors (diodes, thyristors, etc.) •Purpose: To protect semiconductors from the overcurrent when a load circuit shorts out or to prevent secondary damage when a semiconductor itself is broken down.*3 •Applications: Thyristor stacks, electric power regulators, electric furnaces (equipment...

I'd like to know which fuse to use. Refer to page 30 of PROTECT FUSE USER'S GUIDE. Fuses need to have two opposing functions: breaking performance (the lower the rated amperage against conduction current, the better) and durability (the higher the rated amperage against conduction current, the better). Select a fuse that strikes a good balance between those two according to your needs. What should I do when all fuses seem to be unsuitable? Do not hesitate to contact our office. The data of each fuse and the guidelines on how to choose them listed in this catalog have margins for...

The fuse can be used in a direct-current circuit with voltage under this value. The fuse for the circuit over this value of the closed path time constant, which is assumed when a short circuit occurs. (Refer to the chart titled "Application to direct -current circuit" for details.) * Under some conditions, the fuse may not be used even at a value lower than this. The fuse can block off a short-circuit current up to this The fuse can be used at an AC rated voltage under this ©Minimum breaking current The fuse may not be able to block off when it fuses at a value lower than this overcurrent...

• A 6-mm- <£ fuse, which is the of the same size as a glass tube fuse, can be used to implement a current breaking capacity of 10kA at 500V • Able to block off even DC Rated voltage and breaking capacity: 250V AC-10kA, 250V DC (L/R = 10ms)-10kA Minimum breaking current: 250V AC/DC- 4 times the rated amperage Rated voltage and breaking capacity: 500V AC-10kA, 500V DC (L/R = 2ms)-10kA Minimum breaking current: 500V AC/DC- 4 times the rated amperage

FAST ACTING FUSES - COMPACT TYPES Conduction Current (A) rms Conduction Current (A) rms Direct-Current Circuit Voltage (V) •Testing Conditions for Board-Soldered-Type Fuses The power loss and the temperature characteristics are studied using an FR-4 board (one-side board) and a 35-u m-thick copper foil with a copper foil width of 0.5 mm/A depending on the rated amperage (e.g., 5 mm width for a product rated at 10A).

•The full length Is 26 mm (KHK), which is convenient to arrange on the • Being extremely compact, it is compliant to 400V-50A class. •Contribute to miniaturizing the equipment. • Most suitable for small inverters, servos, UPSs, power supplies, etc. •Two types are available for choice according to the installation method. Rated voltage and breaking capacity: 400V AC -10kA, 400V DC (L/R = 5ms)-1 OkA Minimum breaking current: 400V AC/DC - 4 times the rated amperage Rated voltage and breaking capacity: 400V AC-1 OkA, 400V DC (L/R = 2ms)-10kA Minimum breaking current: 400V AC - 5.3 times the...

FAST ACTING FUSES - COMPACT TYPES Power Loss and 'Testing Conditions for Board-Soldered-Type Fuses Temperature The power loss and the temperature characteristics are studied using an FR-4 board (one-side board) and a 35-u m-thick copper foil with Characteristics a copper foil width of 0.5 mm/A depending on the rated amperage (e.g., 5 mm width for a product rated at 10A).

•Three types are available for choice according to the Installation method. •Compact and light-weight, also excellent for prompt cut-off action when • Most suitable for small Inverters, servos, UPSs, power supplies, etc. • Compliant with various standards. • A10-mm- <t> fuse is compliant to the 50A class. Rated voltage and breaking capacity: 660V AC-10kA, 660V DC (L/R = 10ms)-10kA Minimum breaking current: 660V AC/DC - 4 times the rated amperage Rated voltage and breaking capacity: 660V AC-10kA, 660V DC (L/R = 10ms)-10kA Minimum breaking current: 660V AC - 4 times the rated amperage 660V DC...

FAST ACTING FUSES - COMPACT TYPES Direct-Current Circuit Voltage (V) Power Loss and • Testing Conditions for Board-Soldered-Type Fuses Temperature The power loss and the temperature characteristics are studied using an FR-4 board (one-side board) and a 35-w m-thick copper foil with Characteristics a copper foil width of 0.5 mm/A depending on the rated amperage (e.g., 5 mm width for a product rated at 10A).

•800V DC prepared for the regeneration voltage of 400V servos/inverters. • Designed for small-capacity power-supply lines of a high-pressure inverter. Rated voltage and breaking capacity: 700V AC-1 OOkA, 700V DC (L/R = 10ms)-100kA Minimum breaking current: 700V AC/DC - 4 times the rated amperage Rated voltage and breaking capacity: 700V AC-1 OOkA, 800V DC (L/R =10ms)-10kA Minimum breaking current: 700V AC/800V DC - 4 times the rated amperage Rated voltage and breaking capacity: 1000V AC-1 OOkA Minimum breaking current: 1000V AC-4 times the rated amperage UL standard approved rating When...