Fast acting fuseFor protection of semiconductor devices Features ◇ High voltage (AC850V, DC750V) -Same fuse size as 660GHK series ◇ Suitable for inverter, UPS, power supply use ◇ Board mount type ◇ Space-efficient Specifications Rated voltage & Breaking capacity UL recognized : AC850V-10kA / DC750V-10kA L/R=2ms CCC recognized : AC850V-50kA / DC600V-50kA L/R=10ms Pre-arc Total I 2 t WattsWeight I2t loss (A 2 S) at (g) 2 (W) (A S) AC850V-10kA Caution! ※ Arc re-ignition may occur if the fusing current is less than 8 times larger than the fuse rated current. In this case, the fuse should be used in conjunction with other protectors. ※ Fuse should be used at less than 50% of the rated current. Temperature rise characteristics Temperature rise Pre-arcing time-current characteristics Load current / Rated current (%) Current (A) rms The data above has been determined using a single-sided printed board. Base material : FR-4 Copper foil thickness: 35㎛ Copper foil width: 2A/mm (e.g. 50mm width for a product rated at 100A) For inquiries, please contact our sales department at; Tel: 03-3860-8661 Fax: 03-3860-8660 E-mail: [email protected] All specified data in this leaflet is based on available information at the time of publication, and the products and/or specifications may be subject to change without notice. We recommend that all our customers check the latest product information on our web site (http:// www.hinodedenki.co.jp) as well as contacting us before placing orders.