Catalogs >
HIMA >
SystemFacts Planar4

SystemFacts Planar4
2Pages

Catalog excerpts

Planar4 systems ¡¡ SIL 4 ¡¡ For automated processes with extremely high potential risks ¡¡ Scalable redundancy ¡¡ Hardwired systems List of certificates ¡¡ Draft IEC 61508, Part1-7:1997 (up to SIL 4) ¡¡ ANSI/ISA-84.00.01-2004 ¡¡ EN 50178:1997 ¡¡ EN 61000-6-2:2001 ¡¡ EN 61000-6-4:2001 ¡¡ EN 60079-15:2003 ATEX (Zone 2, T4) ¡¡ ANSI/ISA-S 71.04 Class G3 Planar4 systems Where ultimate safety counts Planar4 systems integrate inputs, logic processing and outputs on every module. The application-specific programming of the sytems is accomplished without software, but instead with various wiring techniques such as solder, Termipoint or Wire Wrap on the backplane bus board. All modules can be used in a redundant structure in order to increase availability. SystemFacts

Open the catalog to page 1

Planar4 Operating conditions and CE-Mark ¡¡ EN 50178:1997 Electronic equipment for use in power installations ¡¡ IEC/EN 61000-6-2:2001 EMC, Generic Standards, Immunity for Industrial Environments ¡¡ IEC/EN 61000-6-4:2001 EMC, Generic emmision standard, residential, commercial, and light industry ¡¡ EMC Directive ¡¡ Low Voltage Directive ¡¡ ATEX Directive Additional local certificates available Operating principles De-energized to trip Communication options ¡¡ OPC DA ¡¡ RS485 Alarm&Event ¡¡ PROFIBUS DP ¡¡ Modbus RTU List of modules 96 9000419 1109 V2 © by HIMA Paul Hildebrandt GmbH + Co KG...

Open the catalog to page 2

SystemFacts Planar4 2Pages

Catalog excerpts

All HIMA catalogs and technical brochures

SystemFacts Planar4
2Pages