Current Hilti breakers with TE 500-AVR (DRS-B) control solutions: a For instructions on how to assemble these systems, please refer to the Hilti North America Youtube pageQ DRS-B

These systems fall under table 1, section x: jackhammers and handheld powered chipping tools. In order to be table 1 compliant, the below requirements must be met: • Use tool with water delivery system that supplies a continuous stream or spray of water at the point of impact or • Use tool equipped with commercially available shroud or cowling with dust collection system • Operate and maintain tool in accordance with manufacturers instructions to minimize dust emissions • Dust collector must provide the air flow recommended by the tool manufacturer, or greater • Have a filter with 99% or greater...

Hilti submittal package OSHA 1926.1153 Table 1, Section x SYSTEM OVERVIEW Hilti combihammers, hammers and breakers are table 1 compliant through use of a dust collection shroud hooked up to a vacuum that meets table 1 requirements. Hilti currently offers the below systems with this configuration: Tool Note: previous generations of tools may have different item numbers or nomenclature. Check with your local Hilti representative or product instruction manual to verify