Ready-to-solder netX 90 Design – fully tested and preloaded → Ultra compact multiprotocol solution - in 15 × 32 mm halfsize netRAPID format → Scalable embedded platform in different memory options - including Cortex M4 application processor → Can be preloaded with customer application - in Hilscher automated production process even in lot size 1 → Energy efficient design with low power dissipation - for extended temperature range up to +85°C → For all Industrial Ethernet, Fieldbus and IIoT standards - supported in one hardware design COMMUNICATION networX on chip Hilscher NETX 90 Industrial Ethernet Fieldbus Sensors Scalable Memory Options → QR Code Link: netRAPID 90 Service-Hotline: +49 (0) 6190 9907-90 www.hilscher.com

Scalable embedded platform – netRAPID 90 15mm Common software application interface Boot UART Communication Interface Standalone Solution Three good reasons to choose netRAPID 90 → netRAPID 90 will fully be tested, preloaded and packed in trays via an autonomous robot cell → During the automated production process the communication stack as well as the customer application can be loaded → Device manufacturers can receive netRAPID 90 preloaded with their specific content – ready-to-use and even in lot size 1 Functional test & programming of customer-specific content SMD production & AOXI inspection...

Product Information Technical Data Technical Data Technical Data Operating Temperature -20°C ... +85°C (without airflow) Contacting / Pinout 54 solder contacts 1 mm with 1,5 mm grid LED SYS-System (RUN/RDY), COM-Status 0/1 (COM 0/1), EthernetStatus Link, Activity (LINK RX/TX) Dimensions (L x W x H) 32 × 15 × 4 mm Communication Interface EtherCAT, EtherNet/IP, PROFINET, OpenModbus, POWERLINK, CC-Link IE Field Basic, PROFIBUS, DeviceNet, CANopen, Sercos, 2x Ethernet 100 BASE-TX, OPC UA, MQTT Host Interface 50 MHz SPI-Slave Emission EN 55011 Immunity EN 61000-4-3, DIN EN 61000-4-6, Surge - IEC 61000-4-5,...