Real-Time Ethernet for Raspberry Pi® → Pi as an I/O Device to a PLC → Compatible with Raspberry Pi® 2+3+4, Zero® → PROFINET, EtherNet/IP and EtherCAT firmware → Input and output data configured with 32 bytes → With device description files, drivers and examples netX communication module in HAT format With its multiprotocol SoC netX, Hilscher is one of the technology leaders in matters of industrial communication controllers. The netHAT plug-in module expands an ordinary Raspberry Pi® by a netX access, which allows an exchange of user data between a Pi application and RealTime Ethernet networks via the two RJ45 plugs. configures the input and output data to 32 bytes. Corresponding GSDML, EDS, ESI device description files as well as the driver library can be downloaded from the web page www.netHAT.net. Also a pre-compiled demo application and an example „c“ source code, which can be customized and compiled for own purposes, are offered. The module is compatible with the Hardware Attached on Top (HAT) specification of Raspberry’s GPIO connector. Pi and netHAT communicate via a 25 MHz high-speed SPI interface. The protocol software in the module can optionally be integrated into the networks PROFINET, EtherNet/IP or EtherCAT as a simple I/O device. The driver configuration decides which software is loaded while launching the module. netHAT offers the ideal entry for students and pre-development tests. Just plug the module and communicate! In order to simplify the commissioning of the netHAT on standard controllers and master systems, the driver → QR Code Link: netHAT Service-Hotline: +49 (0) 6190 9907-90 www.hilscher.com The netHAT module is for training purposes only and is not qualified for industrial use. It teaches the use of netX and expands the understanding of its application interface. For the professional use of the netX technology in your own devices, we are h

Product Information Technical Data Technical Data Technical Data System-LED, COM LEDs for protocol-specific diagnosis CE Sign, RoHS, UKCA Compatible with Raspberry Raspberry Pi®4, Pi®3, Pi®2, Zero® Memory 4 MB Quad SPI Flash Host interface LEDs Module standard Communication interface 2x Ethernet 100 BASE-TX Note: All technical data may be changed without further notice. Declaration This product serves for test- and education- / teaching purposes for industrial applications and controls. Every liability is excluded with industrial use. Product Overview NHAT 52-RE* netHAT - netX Raspberry Pi® Module...