Flexible Communication Module for Automation → All major industrial protocols → Master and Slave → One hardware for all Real-Time Ethernet protocols → Ready to use, due to preloaded firmware → Firmware update via integrated Webserver The module for all communication tasks The comX communication module is designed for integration in automation devices e.g. robot controllers, PLCs or drives to add a network interface. All communication tasks are executed autonomously in the module - independent of the processor of the target device. Process data exchange is done via a Dual-Port-Memory, either as 8-/16-bit bus interface or as 50 MHz SPI interface. comX supports all major Real-Time Ethernet protocols as Master or Slave and covers all network specific demands in a single module. → comX Service hotline: +49 (0) 6190 9907-90 www.hilscher.com For support of a line topology the module is equipped with two Ethernet ports. A change of the communication protocol is done by simply loading a different firmware and adding a software license upgrades to a master. Besides Real-Time Ethernet communication there is an integrated Webserver as well as an additional transparent Ethernet channel available, to realize own IT solutions in the host processor of the automatio

comX Communication Module for Real-Time Ethernet and Fieldbus Core Technology The Hilscher Platform Strategy provides the whole range of communication solutions to the user – from standardized PC card up to the integration of the multi-protocol chip netX. All solutions – whether Master or Slave – have the same interface to the application and use the same tools. All comX modules have the same dimensions and are pin-compatible to each other. Thus you can cover the whole range of network protocols with exactely one baseboard design. Thanks to common interfaces you can react quickly and most flexible...

hiLscher Product Information Technical Data Technical Data Technical Data Operating Temperature netX 51 / netX 52 / netX 100 System Interface CE Sign, UKCA angled network connector metal mounting blocks Connector to the baseboard Note: All technical data may be changed without further notice. Product Overview COMXEB 1530.000 | COMX Evaluationboard - For evaluation of all comX types; incl. Software package 1) Slave only 2) Function compatible replacement for comX 10 3) Special EtherCAT Slave with Rotary Switches acc. to ETG.5003-1 empowering communication