The Evaluationboard for all COMX types → Standalone and independent from PC → All COMX types supported → Host interface via DPM or SPI → UART and USB diagnostic interface → Easy access to all interfaces The easy way of COMX Evaluation The comX communication module is designed for integration in automation devices e.g. PLC‘s or drives to add a network interface. Advantage of COMX is that all communication tasks are executed autonomously in the module independent of the processor of the target device. In addition it allows the manufacturer to develop a multi-protocol device with exactly one design, as the change of the communication protocol will be done per software or by changing the module. Especially with multi-protocol devices the evaluation of comX with all its interfaces is of vital importance. The comX Evaluationboard offers the best entry into comX technology. → comX EB Service hotline: +49 (0) 6190 9907-90 www.hilscher.com The board gets powered via a provided 24V power supply and will be operated independent from a PC. It supports all available comX types and offers free access to all interfaces and pins of the modules, e.g. host-, diagnostic- or synchronization interfaces. Thus the construction of special adapters or cabels is not needed and the manufacturer can focus on the development of his application and hardware. A comprehensive software package including all relevant tools is always part of th

Product Information Technical Data Technical Data Technical Data SPI host interface Pin strip or USB type B Diagnostics UART or miniUSB CANopen Sub-D 9pin male Certification RoHS, CE Sign for test purpose only, UKCA CC-Link / DeviceNet CombiCon 5pin PROFIBUS-DP Sub-D 9pin female DPM Host Interface 68pin connector for NXPCA-PCI Power supply Socket or CombiCon 3pin Note: All technical data may be changed without further notice. COMX Evaluationboard (incl. software package and 24V power supply) Core Technology → comX EB Service hotline: +49 (0) 6190 9907-90 www.hilscher.com Based on the Hilscher...