Load Tap Changer Filtration Systems
2Pages

{{requestButtons}}

Catalog excerpts

Load Tap Changer Filtration Systems - 1

Load Tap Changer Filtration Systems HILCO’s complete line of ltration products can meet your requirements Proven performance. Electric utility companies continue to show interest in using Hilsorb™ dryer lters on their transformer load tap changers (LTC). Rightfully so, as these lter cartridges have extended the time between maintenance intervals, thereby saving utility dollars. Dryer/lter cartridges, such as the PD718-12-CN, remove free water as well as particulate down to 1 micron ensuring that the contacts in the LTC always operate in oil that is at its prime dielectric strength. (See HHB-1) HILCO: the originator of the LTC ltration system. For 15 years, HILCO has provided ltration systems to the utility industry to clean up LTC oil compartments. Since the original pilot project with Virginia Power in the early 1980s (see VPA-1), HILCO has manufactured hundreds of custom-designed systems for various utility companies. Products to meet everyone’s needs. Experience has shown that each utility has different requirements for LTC lters. Some companies are interested in ‘bare bones’, standard HILCO housings. When these units are properly installed, they provide an economical solution to the problem. On the other end of the spectrum, many utilities have opted for all the ‘bells and whistles’, where only simple plumbing and electrical work is required. In all cases, HILCO has the right product for you. LTC Filtration System Standard Features • 3.5 gpm positive displacement pumps close coupled to 1/3 HP TEFC motor. Pump has 60 psi built-in relief valve. • NEMA-4 electrical enclosure • Buna-N o-ring cover seals • Vent cock • Y-strainer • Pressure gage to detect dirty cartridge • ANSI #70 gray paint • Pressure switch, SPDT or DPDT to detect dirty cartridge • Run light • Dirty cartridge indicator light

Open the catalog to page 1
Load Tap Changer Filtration Systems - 2

Deluxe LTC Filtration System Typical Model: 03718-530101031 Drawing: 5301-01-031-C Features: includes all standard features of the LTC Filtration System, plus: • Enclosed in Nema 4 enclosure with front and top access • Float switch to indicate oil in compartment • Pressure switch (SPDT) to indicate dirty cartridge • Transfer valves to ll or top off reservoir • Drain valves • Flow indicator Other options available (partial list): • Programmable timer • ASME code lters • Pressure switch - to be wired into an alarm • Drip pans and sump alarms - for leak detection • Magnetic motor starter to...

Open the catalog to page 2

All The Hilliard Corporation catalogs and technical brochures

  1. MTR

    1 Pages

  2. Magna Torque

    1 Pages

  3. PTO Clutch

    2 Pages

  4. Chips Away

    2 Pages

Archived catalogs