Catalogs >
The Hilliard Corporation >
HSO/HSI Sprag Clutches

HSO/HSI Sprag Clutches
4Pages

Add to favorites

Catalog excerpts

GREASE FITTING ##HOLE SPACING - HSO ALL OTHER CLUTCHES HOLES EQUALLY SPAC

Open the catalog to page 1

INTRODUCTION The Hilliard Sprag Clutch is a freewheel device having an inner race and an outer race, either of which can be the input or output member. The input can drive the output in a chosen direction and permit the output to overrun in the same direction. The clutch consists of a cage full of steel sprags or wedges, located in the space between concentric inner and outer races. Power is transmitted from one race to the other by the wedging action of the sprags between them. Each sprag is shaped so that one diagonal dimension is longer than the distance between races while the other...

Open the catalog to page 2

Consult factory for additional bore sizes with special non-rectangular keys. ORDERING INFORMATION Bore sizes are assigned by a predetermined "S" Number, or S#. Example: HS0700B S#10 Hilliard Sprag Overrunning Clutch Size 700 Oil Filled with bore size of 2.00 inches

Open the catalog to page 3

The Hilliard Corporation Your Local Representative: 100 West Fourth Street Elmira, New York 14902-1504 USA PHONE: 607.733.7121 FAX: 607.737.1108 hilliardcorp.com hilliard@hilliardcorp.com

Open the catalog to page 4