I The HILCO® valve pad design has evolved through the years and currently consists of two options: HILCO® VALVE B-STYLE VALVES • Provide metal to metal sealing. Sealing pad is 316 SS coated with a polymer-based moly-graphite coating for low turning torque. • Maximum leakage of 40 ml/min on the offline side (ISO VG 22 oil, 70°F). • Utilizes resilient Quad-Ring elastomer secured in a 316 SS pad. • Standard for sizes through 6” • Can be retrofitted into existing B-Style bodies. • Maximum leakage of less than 1 ml/min on the offline side (water). • Pad wipes bore clean with transfer. • Pad seal compression...

6-WAY VALVE REPAIR KITS Transfer Valve Repair Kits (Soft Parts) 6-WAY VALVE REPAIR KITS Split Valve Repair Kits (Soft Parts) Valve Model Valve Model Valve Model ^Consult factory for replacement shaft information Valve Model Consult factory for replacement shaft information

SPLIT VALVE REPAIR KITS Split Valve FT-Series B Style with Shaft 1.5” E Style FT-Series E Style with Shaft Split Valve 6-WAY TRANSFER VALVE REPAIR KITS Consult factory for 6-Way repair kits requiring replacement shaft. The valve model number and/or serial number are required to ensure component accuracy. *Consult factory for replacement shaft information

REMOVE VALVE HANDLE Orient Transfer Valve handle to the middle position. Using a drift pin and hammer, tap out retaining pin from handle. Get step-by-step instruction on transfer valve rebuild procedures: • Preparation & Valve Removal • Shaft Removal • Pads & Springs Removal • Shaft Components Needed • Valve Type Identification • O-Ring Inspection • Shaft Reinstallation • Assembly Cover Installation IHILCO® TRANSFER VALVE COMPONENT REPAIR VIDEO 100 West Fourth Street, Elmira NY 14902-1504 USA PH 607-733-71211 FX 607-737-1108 [email protected] I www.HilliardCorp.com