Catalog excerpts
HILCO® Quench Oil Reclaimer PURPOSE Heat treating operators are faced with mounting costs and tighter regulatory compliance issues when disposing of used quench oils. The HILCO® Quench Oil Reclaimer makes it possible to safely and economically recondition and reuse quench oil. This dramatically reduces disposal costs and new oil purchases and forms an efcient uids management system. The system removes moisture, dissolved gases and particulate contamination from oil-based quenching uids. Water is removed, thus eliminating the cause of foaming and possible explosive and re hazard. The removal of particulates will eliminate smoking. This system can easily be justied by heat treaters who generate only 2,000 gallons a year. FEATURES 4-8 GPH Rated Flow 1-1/2 KW Low Watt Heater Nema 12 Enclosure High Temperature Cutoff Switch Liquid Level Indicator Vacuum Regulator HILCO® is a registered trademark of The Hilliard Corporation. 50-Gallon Storage Tank Replaceable Filter/Disperser Element Operating Electrics as Specied Distillate Collection Tank Manual Drain Valves for Tanks Flow Indicator with Control Valve
Open the catalog to page 1DESCRIPTION OF OPERATION The Quench Oil Reclaimer is designed to process oil at a rate of up to 8 GPH, restoring the oil down to its saturation point in a single pass, providing the water content is not over 1%. Oil is rst settled in the customer’s dirty oil settling tank. A connection line from the top of this tank needs to be provided and piped into our 1/4” FPT inlet. Oil ow is adjusted from 5-8 GPH utilizing a control valve and the ow indicator provided with the unit. The oil is drawn by 27” of vacuum through a berglass dispersion element. The oil is heated in the vaporization chamber...
Open the catalog to page 2All The Hilliard Corporation catalogs and technical brochures
-
Linkless Centrifugal Clutch
1 Pages
-
Friction Torque Limiter
1 Pages
-
Intermittent Drive Assembly
1 Pages
-
Single Revolution Clutch
1 Pages
-
Enclosed Overrunning Clutch
1 Pages
-
Overrunning Sprag Clutches
4 Pages
-
Magna Torque (MTR)
1 Pages
-
HSO/HSI Sprag Clutches
4 Pages
-
Sprag Clutches
1 Pages
-
Dual Drive & Turning Gear
1 Pages
-
MTR
1 Pages
-
Magna Torque
1 Pages
-
Press-In Wheel Clutch
2 Pages
-
Auto-Lok® Differential
4 Pages
-
PTO Clutch
2 Pages
-
OVERLOAD SAFEGUARD
4 Pages
-
CENTRIFUGAL CLUTCHES
4 Pages
-
Hilsorb Dryer Cartridge
2 Pages
-
PH426 XX CG1V Element
2 Pages
-
Chips Away
2 Pages
-
Hilco Bag Filter Cartridges
2 Pages
-
Hilco Oil Mist Eliminators
4 Pages
-
Hilco Replacement Cartridges
2 Pages
-
Hilite E Filter Cartridges
2 Pages
-
PH Filter Cartridges
2 Pages
-
Products For Metalworking
2 Pages
-
Non-Code 718 Filter Housing
1 Pages
-
GASEOUS FUEL FILTERS
2 Pages
-
Portable Filtration
2 Pages
Archived catalogs
-
Filtration Products and Systems
24 Pages
-
Overload Release Clutches
2 Pages
-
Auto Lok Differential
4 Pages
-
Duplex Filter
2 Pages
-
Star Beverage Filter
4 Pages
-
Star Wine Filter
4 Pages
-
Star Filter Press
8 Pages