Hilco Coalescer Separator Systems
4Pages

{{requestButtons}}

Catalog excerpts

Hilco Coalescer Separator Systems - 1

Hilco Coalescer/ Separator Systems Remove Moisture and Particulate Contamination from your Steam and Gas Turbine Lube Oils

Open the catalog to page 1
Hilco Coalescer Separator Systems - 2

Self-Sufcient Stand-Alone Models Features • System ow rates from 10, 30, 60, and 100 GPM • Positive displacement oil pump with integral relief valve • TEFC pump motor • NEMA 4 electrical enclosure with controls • ASME code pre-lter vessel • ASME code coalescer/separator vessel • Clean and dirty sampling ports • Inlet basket strainer • Automatic, pneumatically operated, water drain valve • Manual moisture drain • Liquid level sight gauge • Particulate removal efciency of 99.5% @ 3 micron • Free and emulsied water content reduced to under 25 ppm • Total water content to under 150 ppm based on...

Open the catalog to page 2
Hilco Coalescer Separator Systems - 3

Portable Models Features Flow capacities from 1 to 30 GPM Liquid level sight gauge Ability to service the needs of multiple units Customized electrical requirements Integral particulate lter and coalescer lter arrangement Single or Multiple-Element Vessels Features ASME Code and non-code designs available Liquid level sight gauge Designed to side stream part of the existing lube oil pumps ow Duplex designs available for uninterrupted ow during element changeout Auto drain optional equipment Custom Designs Hilco’s staff of engineers is always willing to design a system for your particular...

Open the catalog to page 3
Hilco Coalescer Separator Systems - 4

Typical System Performance The chart on the right depicts the moisture content of a 2,000-gallon steam turbine reservoir with a 10-GPM Hilco coalescer/separator installed. After 16 hours of operation, the Hilco coalescer/separator was able to reduce the moisture content of uid from 3,174 ppm to its natural saturation point. Time (Hours) Hilco has a large inventory of coalescer/separator element replacements available for immediate shipment. Call for assistance in determining the appropriate size. The Hilliard Corporation 100 West Fourth Street Elmira, New York 14902-1504 Phone: 607-733-7121...

Open the catalog to page 4

All The Hilliard Corporation catalogs and technical brochures

  1. MTR

    1 Pages

  2. Magna Torque

    1 Pages

  3. PTO Clutch

    2 Pages

  4. Chips Away

    2 Pages

Archived catalogs