Filtration Products and Systems
24Pages

Trademark of the Hillliard Corporation. ٙ Reclaimers 14 Oil Reclamation Systems 15 Machine Tool Coolant Recyclers 15 Grinder Filtration Systems 15 Oil Removal Systems 15 Membrane Filtration System Hilco Ceramic Membrane Filtration System 16 Other Hilco Products Stationary and Portable Filters with Pump Sets 17 HP4B-HV Gearbox Filtration System 17 Dryer Filter Systems 18 Load Tap Changer Filtration System 18 Star Filter Presses 18 Air Breather Filter 19 Storage Tanks 19 Vent Mist Eliminator 19 CHIPS AWAY Coolant Power Boost System 20 HILCOSEP Coalescer Separator 20 Hydraulic and Lube Oil...

Weve seen many changes in the industry since our rst oil reclaimer was built in 1925. The problems have become more complicated and the ltration techniques more sophisticated. During these changing times, The Hilliard Corporation has quietly and steadfastly labored to solve all kinds of uid contamination problems. Through this hard work, our engi- neers have built a reputation for us as problem solvers.Hilliard is an engineering company. Every one of our products has been developed and ne tuned by ourexceptional sta of engineers. We bring uid contamination problems under control Җ cost e...

Long life. Superior quality.The reliability and e ciency of any ltration system is chie y depen-dent on the quality of the cartridges used in it.Weve worked hard to develop a full line of quality Hilco cartridges for virtually every application. Hilco can restore many oils and coolants to a like-new condition.Our full line of lter cartridgesincludes various sizes, ltration e ciencies and dirt-holding ca-pacities. Carefully consider the many requirements of your particular application before choosing a cartridge. Factors to be considered include type of contaminant, contaminant levels, type...

Microgard Cartridges for highest e ciency available.Microgard cartridges feature three ltration layers: outer cellulose media layer for coarse ltration; an intermediate glass media for micro ltration; and an inner cellulose-media layer for added support. Microgard cartridges have an e ciency rating of Beta 5=75 (Beta 10=1000). They o er excellent protection for sensitive components.For complete product information, request bulletin PPC-2 from our website.Safegard ٙ Cartridges for 3, 5, 10 and 20 micron e ciencies.Safegard single-layer pleated paper cartridges are economical for use in...

Hilsorb Dryer Cartridges for moisture and particulate control.Hilsorb dryer cartridges quickly and e ectively remove solid and water contaminants from hydraulic, lube and insulating oils. They give high performance in applications where moisture control and ltration e ciency are of primary importance. Made with patented four-ply construction, Hilsorb dryer cartridges are available in two e ciency ratings. The maximum moisture holding capacity of 2.54 quarts depends on ow rate and other variables.For complete product information, request bulletin HDI-2 and HHB-1 from our website.High...

Center Tube Adapters for cartridge economy.If you have an application that requires large quantities of cartridges, save up to 25 percent through the use of cartridges without integral center tubes. To do this, use our separate center tube adapter, which is available in sizes to t 630, 718, and 736 cartridges.For complete product information, request bulletin SPD-1 from our website.Pleated Screen Filter Cartridges.The Pleated Screen Cartridge is a cleanable element with outside in ow. It is a direct replacement for a PL718 cartridge when cartridge disposal is a problem.Available in 25, 40,...

Strainer Baskets to remove large particles.For use in place of or in conjunction with Hilco lter cartridges, these strainer baskets are available in 5x11Ԕ and 7x18Ԕ sizes. They are useful as pre- lters for the removal of particulates of 75 to 100 micrometers and larger. O-ring Sealed Cartridges.Housings for o-ring sealed CG cartridges are used for critical seal applications. O-rings provide a better seal, higher tolerance of misalignment, and greater compatibility with cartridge material. O-rings are more durable than standard at gaskets with a higher resistance to heat and water.Coreless...

Hilite-A Cartridges for acid reduction.These cartridges feature a special activated alumina media for the adsorption of acids and other oxidation products from synthetic uids and petroleum oil. A water-resistant media, activated alumina will minimize the forming of precipitates or gels when used with phosphate-ester uids. Hilite-A Cartridges are available in various sizes and ow rates.For complete product information, request bulletin HAC-3 from our website.Selexsorb GT Cartridges are specially formulated for phosphate ester uids.Selexsorb GT is a patented adsorbent speci cally designed for...

Fuel Coalescer HC 628-01-C Cartridges.Originally developed for the U.S. Air Force for refueling B-1 bombers, the fuel coalescer is capable of reducing water in fuel from % or 5000 ppm to under 10 ppm at 71 GPM per cartridge with inhibited jet fuel per API 1581 procedures. This cartridge also works in No. 2 diesel at a ow rate of 35 GPM and on light oils up to ISO 32 in viscosity, owing at 4 GPM per cartridge. Fuel Separator HS 611-200-C Cartridges.The fuel separator is a hydrophobic screen element to be used in series downstream from the fuel coalescer. Its function is to prevent coalesced...

TurboFlo Duplex Filters.The Hilco TurboFlo Duplex Filter line is easy to operate and maintain with a low turning torque and no jacking of the sealing pads. Welded-in transfer valves and high ow synthetic elements save space, and ow is under the lter cartridge which does not impinge on the lter elements. With no anges between the transfer valve and lter housing, there are fewer potential leak points.Features include ASME Code construction, o-ring sealed covers, coreless elements, and standard carbon steel and 316 stainless steel construction. Also available in 1-1/2 to 8Ԕ inlet and outlet...

Standard Housings for High Flow Synthetic Elements.These housings can be used for 312, 414, 518, 720, and 739 elements, for ows up to 2000 gpm. The ޔ FNPT inlet and outlet are up to 10, 150# anged.Housing features include ASME construction (non-Code also available), o-ring sealed covers, and carbon steel or 316 stainless steel.Well-suited for o -line ltration systems, these housings can be used for o-ring sealed elements as well as Selexsorb, Hilite, Activated Alumina, and Ion Exchange elements. Features o-ring sealed covers, swing bolt cover hardware, carbon steel or 316 stainless...