Catalogs >
The Hilliard Corporation >
Dual Drive & Turning Gear

Dual Drive & Turning Gear
1Pages

Catalog excerpts

OVERRUNNING CLUTCHES MAGNA TORQUE CMTRD FOR CLUTCH COUPLINGS, DUAL-DRIVE & TURNING GEAR OVERRUNNING COUPLINGS Typical applications are press ink rolls, coal feeders, press feeds, honing machines, speed reducers, bakery equipment and textile machines. Roller-Ramp design for increased reliability and longer life. An integral part of many Hilliard motion control products is our roller-ramp design. The use of hardened cams and precision-machined rollers maximizes service life. There is almost no wear during freewheeling operations because rollers are free to rotate between the outer member and the inner cam. When the rollers are engaged, the load falls at random positions on the rollers.The result is superior service life and reliability. The MTR is similar to the MT design except the cam surface is reversed allowing it to be used in multi-speed/dual drive applications. Outer Housing Driving Direction Outer Housing Overrunning Direction The contact point between housing and rollers changes continually with each engagement. This application illustrates an inclined plane cam, but a flat cam is utilized in other applications. MULTI-SPEED DRIVES/DUAL DRIVES Typical applications for dual-source drives are blowers, pumps and fans. For multi-speed drives, our overrunning clutches are ideal in such operations as conveyors and forming rolls. SPECIFICATIONS/SIZE RANGE THE HILLIARD CORPORATION 100 West Fourth Street, Elmira NY 14902-1504 USA | hilliardcorp.com ph: 607-733-7121 | fax:607-737-1108 | hilliard@hilliardcorp.com Hilliard Products are Made in the USA

Open the catalog to page 1