Chips Away
2Pages

{{requestButtons}}

Catalog excerpts

Chips Away - 1

PRODUCTS FOR MACHINE TOOLS The CHIPS AWAY high-pressure coolant delivery system from HILCO forces coolant through the machine tool, expelling chips from the bore hole or cutting surface. These chips are smaller and easier to manage than the larger spiral chips. This helps prevent chips from getting caught on chucks or wrapping around boring bars which requires machine shutdown and manual removal. The lower temperature and reduced friction leave your product with a better finish. Reduced Cycle Time Longer Tool Life Eliminates Pecking Cycles Improves Finishes Prevents Damage from Heat Eliminates Recutting of Chips Enables Higher RPMs Reduced Coolant Purchases Typical CHIPS AWAY application Why choose CHIPS AWAY? Normal Chips Quiet Operation Ability to Run Dry Consistent Pressure Built-in High-pressure Filter Reduced Vibration Multiple Models Available Using CHIPS AWAY

Open the catalog to page 1
Chips Away - 2

HILCO Coolant Recovery System The HILCO GS 200 is designed to recycle water-based machine tool coolants by removing metal fines and other particulate matter, as well as tramp oil. A pump pulls dirty coolant through a highly effective oil skimmer and then through a 10 micron pre-filter to remove metal fines and other particulate matter. The filtered coolant is then pumped through a coalescing cartridge to concentrate and release the free, unemulsified tramp oil and allow it to float to the top of the coalescing vessel. The clean coolant returns to the sump, while the tramp oil can be drained...

Open the catalog to page 2

All The Hilliard Corporation catalogs and technical brochures

  1. MTR

    1 Pages

  2. Magna Torque

    1 Pages

  3. PTO Clutch

    2 Pages

Archived catalogs