In manufacturing of plastic, non-woven, film, printing, packaging and Hi-Tech devices, static charge is an outstanding issue and it is unavoidable. Static charge brings some impacts to products and processes, like attracting particles / dust, contamination of coating and lamination, downtime of equipment and breakdown of electronic components etc. Real-time, accurate and data-retrievable static charge monitoring is a critical point of in production. That is also required by Industry 4.0. Hildebrand Technology's iONsense is a microprocessor-controlled and flexibly at any location installed static charge monitoring system. Static charge on product surface can be real-time measured and data are visualized and recorded by iONcontrol. Allowable range of charge can be pre-set and marked on screen. Once the measured charge exceeds the pre-set limit, an alarm will be activated, and the alarm signal can be also connected to customer's light tower system. The system can connect multiple sensors for measurement at more locations in productions due to the CAN field bus. Gema Switzerland GmbH Sommeraustrasse 5 CH-9200 Gossau Applied in production line WWW.HILDEBRAND-TECHNOLaC3Y.COM Surface Dust Removal • Electrostatic Neutralising • Electrostatic Charging • Measurement Systems AUTO DC Technology® is a registered Trademark of Hildebrand Technology

Sensor head Dimension Detection hole Detection range Specification Model Application Area • Web (film) Production line • Web (film) Slitter Machine • Printing Line • Flexible package material converting line • Electronics assembly I Application Extension In case of static charge exceeds pre-set allowable range, static charge elimination system must be implanted. This static charge monitoring system can directly connect with static discharging bars iONstream 4.0 without additional software. About Hildebrand Technology is an expert in static charge control and web /sheet cleaning. It leads the...