Electrostatic charging system

Electrostatic charging system System description iONcharge 4.0 is the latest generation of electrostatic charging systems. The high voltage power supply is integrated inside the charging electrode profile. High voltage cables with their problems and disadvantages are history and a simple 24 Volt DC-supply voltage of the charging bar is sufficient. The high voltage values can be very simply set via a programming button directly on the bar. The integrated CAN bus allows the bidirectional communication of all rated and actual values and process statuses to the higher-level overall control iONcontrol...

The iONcharge 4.0 charging system is designed to apply electrostatic charges to an insulating substrate surface. In order to charge the substrate a suitable opposite field polarity is essential. If this opposite polarity cannot be ensured via a machine metal/ground an opposite polarity charging electrode must be installed. The charging bar itself needs to be installed at a defined distance to the substrate surface depending on its use and application. The substrate will pass in between the two electrode polarities. Due to the high voltage generated at the emitter pins, the ions generated settle...

Gema Switzerland GmbH Sommeraustrasse 5 CH-9200 Gossau Surface Dust Removal • Electrostatic Neutralising • Electrostatic Charging • Measurement Systems