PF80E FEPM Series
6Pages

PF80E FEPM Series PF80E FEPM Series has different feature with PF80V，also has different applications. Basically the compositive monomer of PF80E is similar with PF80V，however，PF80E has more excellent molecular structure than PF80V，therefore the parts which mainly composed of PF80E are considered as：       Adequate for low temperature environment Alkali resistance Ammonia resistance Acid resistance Adequate for high temperature environment Possible to be used instead of some FFKM material PF80E FEPM is a kind of chemical compound which made from peroxide Elastomer，the main difference between PF80E and PF80V is that PF80E FEPM contain E type protective monomer，the material made the chemical-resistance and the temperature tolerance of PF80E second to that of FFKM. The cost of PF80E is much cheaper than FFKM. Anyway, PF80E can only provide 70% chemical-resistance of FFKM, the users have to confirm the process before usage. FFKM may be over-spec. for some applications, in such case, PF80E FEPM is your best choice of low cost and high performance. Technical Data Material Status Sales territory •North America •High speed cure •Acid resistance •Alkali resistance •Resistance to high •Good elasticity at low temperature temperature •Resistance to ammonia •Middle & low viscosity •Less deformation •Belt/strip parts •Rubber rod Produce process •Wheel press •compound •Oring •Sheet parts •Compressing molding •Extrude •Injection molding •Resin transfer molding Unit & value Standard test method Note：The features are the special material behavior, not material specifications. Please contact us if you have any inquiry, email address： ec@high-light.com.tw Or you can fill out the questionnaire on line：http://www.high-light.com.tw/contact.php By Date : 2014-11-12 www.high-light.com.tw |

PF80E FEPM Series 無輪痕氟橡膠系列 PF80E FEPM 無輪痕氟橡膠系列是與 PF80V FK5 無輪痕氟橡膠系列進一步搭配的材料。 在試劑的耐受性上盡可能達到和 PF80V FK5 Series 互補的效果。 PF80E FEPM 無輪痕氟橡膠系列的組成單體基本上和 PF80V FK5 無輪痕氟橡膠系列類似，但是因 為結構比例較佳，因此比較之下，以 PF80E FEPM 無輪痕氟橡膠系列為主的材料，有以下特性。 PF80E FEPM 無輪痕氟橡膠系列的一些基本性質：:  以 PF80E FEPM 無輪痕氟橡膠系列為材料的化合物是使用過氧化物彈性體為原料 與 PF80V 最大 ， 差異在於 PF80E FEPM 無輪痕氟橡膠系列所使用的保護單體為 E，可有僅次於 FFKM 的耐化學性 及耐溫性，在使用上較 FFKM 成本低廉很多，但化學抵抗只有 FFKM 的 70%，使用前確認環境後 使用的過程會較順利，FFKM 在

PF80V FK5 Series No roller mark fluoroelastomer series Alkali-resistant, new structure of fluoroelastomer, for touch panel wet processes. PF80V FK5 No roller mark fluoroelastomer series can resist many kinds of etchants (ex. Corrosive oil, ammonia solution, alkali and alkali vapor). There are several different way to install FP80V. FP80V will have cross-link reaction with other reactors when the peroxide is taken as the cross-link agent.FP80V FK5 is good for resisting the following substances:   High temperature steam Amine group fluid High PH value fluid ITO wet process Touch panel...

Technical Data Material Status Sales territory •Resistance to ammonia •Resistance to most & alkali solvent •No roller mark •Chemical resistance •Good Mechanical •Water repellence strength •Belt/strip parts •Mix •Gasket •Wheel press •compound •Oil resistance •Steam resistance •Anti-viscous Produce process •Hose •Oring •Seal parts •North America •Sheet parts •Valve parts Monney Viscosity ML1+10,121°C Fluorine content1 •Injection molding •Resin transfer molding Unit & value •Compressing molding •Extrude Standard test method Note：The features are the special material behavior, not material...

基本資訊 物料狀態