ISO Series
32Pages

{{requestButtons}}

Catalog excerpts

ISO Series - 1

^Q^B^P^ HIGHLIGHT TECH CORP. There is always something to do with vacuum tech in life.

Open the catalog to page 1
ISO Series - 2

General Information ...?."..'. Complete Clamp Assemblies 2-11 Complete Clamp Assemblies 2-111 Connections of ISO-series Fittings 2-V Rotatable Bolt Ring 2-3 Split Retainer Ring ...2~5 Double Wall Clamp 2-7 ISO Centering Ring with O'Ring 2-16 Centering Ring, O'Ring 2-20

Open the catalog to page 2
ISO Series - 3

■ ^™ ■ ^™ HIGHLIGHT TECH CORP. General Information OUTER RING DOUBLE CLAW CLAMP DOUBLE WALL CLAMP CENTERING RING • The components of ISO universal flange system are defined by the International Standards Organization (ISO). • The construction of ISO flange series includes two smooth-faced sexless flanges clamped together with a combination metal centering ring and elastomeric O-ring between them. • ISO components are reusable and changeable with other ISO dimension components of the same size. • Blanks & Flanges • Retainer Rings • Centering Rings • Outer Rings • Fastening torque • O'ring...

Open the catalog to page 3
ISO Series - 4

^■^^ HIGHLIGHT TECH CORP. Complete Clamp Assemblies The system is versatile because of the many ways in which components can be assembled. O Double Wall-Clamp or Double Claw Clamp Illustrates the double wall (claw) clamp assembly to connect pairs of ISO flanges. Ease of use and economic make this the most commonly used configuration. DOUBLE CLAW CLAMP DOUBLE WALL CLAMP CENTERING RING The two bolt flanges connected in the normal way. BOLTED FLANGE CENTERING RING BOLTED FLANGE OUTER RING Dimension in mm unless otherwise noted All information contained herein was current at time of...

Open the catalog to page 4
ISO Series - 5

^■^P^ HIGHLIGHT TECH CORP. Complete Clamp Assemblies 0 Single Wall Clamp Single wall clamps are used to join an ISO flange to a tapped flange on a pump, chamber or gate valve. SINGLE WALL-CLAMP CENTERING RING TAPPED BOLTED FLANGE This fastening method allows the ISO flange to be rotated for ease of component alignment. Additionally, a rotatable bolt ring can be used to fasten an ISO flange to a non-rotatable flange using bolt. BOLTED FLANGE CENTERING RING SPLIT RETAINER RING ROTATABLE BOLT RING Dimension in mm unless otherwise noted All information contained herein was current at time of...

Open the catalog to page 5
ISO Series - 6

^^H^^ HIGHLIGHT TECH CORP. Applications for this system are as varied as the imagination can make them. Some examples are: O Roughing and foreline plumbing for large vacuum system. © High vacuum, high conductance, inter-connections. 0 Modular system which will be modified frequently. © System requiring frequent cleaning. © Experimental system in research laboratories. Dimension in mm unless otherwise noted All information contained herein was current at time of publication, we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 6
ISO Series - 7

^^■^P^ HIGHLIGHT TECH CORP. Connections of ISO-series Fittings Dimension in mm unless otherwise noted All information contained herein was current at time of publication, we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 7
ISO Series - 8

Center Ring • Viton O'ring bakeable to 200°C intermittently, sustained use to 150°C. • Vacuum seal of KF-series: O'ring compression by uniform pressure application around the 15° outer flange surface. • The vacuum seal of ISO-series is made by compressing the O'ring between the mating flanges. This done by alternately wrench- tightening opposing pairs of clamps or bolts until the first metal-to-metal contact is made between the inner surfaces of the flanges and the spacing lips of the centering ring. • Centering Ring : 304 S.S. (Other material available upon request) • O'ring : Viton (Other...

Open the catalog to page 8
ISO Series - 9

^^K^F^ HIGHLIGHT TECH CORP. Bored Blank m^^m Dimension in mm unless otherwise noted All information contained herein was current at time of publication, we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 9
ISO Series - 10

^^■^P^ HIGHLIGHT TECH CORP. Bolted Flange Bolted Flange-Tapped Dimension in mm unless otherwise noted All information contained herein was current at time of publication, we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 10
ISO Series - 11

^•^B^P^ HIGHLIGHT TECH CORP. Rotatable Bolt Ring Dimension in mm unless otherwise noted All information contained herein was current of publication, we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 11
ISO Series - 12

Half Nipple All information contained herein was current at time of publication, we reserve the right to change the design/specification Dimension in mm unless otherwise noted for products improvement without notice.

Open the catalog to page 12
ISO Series - 13

HIGHLIGHT TECH CORP. Split Retainer Ring Dimension in mm unless otherwise noted All information contained herein was current at time we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 13
ISO Series - 14

^^■^P^ HIGHLIGHT TECH CORP. Single Wall Clamp Dimension in mm unless otherwise noted All information contained herein was current at time of publication, we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 14
ISO Series - 15

HIGHLIGHT TECH CORP. Single Wall Clamp Double Wall Clamp Min. Quantity Fit Flange Parts No. Dimension in mm unless otherwise noted All information contained herein was current at time of publication, we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 15
ISO Series - 16

Double Claw Clamp Min. Quantity Fit Flange Parts No. Dimension in mm unless otherwise noted All information contained herein was current at time of publication, we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 16
ISO Series - 17

^^t^^ HIGHLIGHT TECH CORP. Model No. Material Fits Flange Parts No. Dimension in mm unless otherwise noted All information contained herein was current at time of publication, we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 17
ISO Series - 18

^^t^^ HIGHLIGHT TECH CORP. Dimension in mm unless otherwise noted All information contained herein was current at time of publication, we reserve the right to change the design/specification for products improvement without notice.

Open the catalog to page 18

All Highlight Technology Corp. catalogs and technical brochures

  1. CF Series

    32 Pages

  2. Vacuum PUMP

    12 Pages

  3. Scroll pump

    4 Pages