Measuring Technology for your Safety on Machines
4Pages

Measuring Technology for your Safety on Machines Stop Time Meter Stop Time Measurement Determination of Safety Distances Velocity Measurement 1 Stop Time Meter

The stopping performance is measured on machines which are equipped with active opto-electronic protective devices. Light curtains, laser scanner as well as two hand controls allow an unobstracted access to the hazard area of the machine.They only ensure a protection if there is a sufficient safety distance between protective device and hazard area. It may not be possible to reach the hazard area earlier than the machine has stopped. The safety distance is determined by measuring the stopping time and formulas out of EN/ISO standards. the correct safety distance. During the lifetime of the...

mobile measuring system fast mounting easy to operate battery powered sturdy design suitable for all machines no electrical connection stop time and distance measuring selection of protective devices safety distances according EN/ISO 13855 evaluation of highest velocity input of machine numbers memory for all measuring protocols machinery management velocity measurement rpm recording multi-lingual operation and much more... • All stored measuring protocols can be transfered to a PC. They can be processed and stored in various formats. • A machine pool management allows up and download of...

Measuring Device Safetyman DT2 Power Supply: Battery : Operating time: Charging time: Weight: Dimensions (W x H x L): Display: Key board: LEDs: Interfaces: Processor: Frequency: 12 V, 1000mA Lithium Ions 2300 mAh ca. 20 h ca. 3 h 1,45 kg 170 x 158 x 100 mm 3,5 Inch, full colour, 320 x 240 dots buttons Duraswitch A, B, C, ESC white, orange, blue sensor, actuator, power supply USB, LAN, Jtag, diagnosis Cortex ARM 7, 32 Bit max. 125 MHz Sensors Cable transducer: Cable length: Resolution: Mounting: Dimensions (W x H x L): Weight: Other sensors - Wheel encoder (for slow rotary motions and...