Catalog Milling Tools/Accessories
38Pages

Order address: HG GRIMME SERVICE GmbH & Co. KG / Osterweg 23 / D - 86879 Wiedergeltingen Tel.:+49 82 41 96 08 0 / email: info@hg-grimme.de

TOOLS, ACCESSORIES AND SPECIAL TOOLS The technological design and the quality of the milling tools have a high influence on the economical efficiency as well as the quality of CNC machining. We have decades of experience in manufacturing high-precision CNC milling machines. Our expertise in the use of optimal tools is based on the analyses and results of our own test series and the experience and the feedback we receive from of our customers. We develop, produce and supply high precision tools made in solid carbide and optimised for high speed machining. Additional special coatings make the...

General information Cutters The material of our cutters is solid hard metal. The cutting geometry, i.e. cutting angle, chips clearance, relief-ground cutting and helical angle are adapted to most plastics. All standard milling cutters with a maximum projecting length of 35 mm are suitable for a maximum rotational speed of up to 40.000 rpm. Please observe manufacturer specifications in case of special milling cutters. Coatings The cutters can be given a special coating: TINALOX® TINALOX (Titan-Aluminumoxyd) DIAMANT Diamante is the hardest known material. It's hardness and low friction...

Single helical milling cutter - straightStraight - StandardUse: Especially for thin plastics. -3

Single helical milling cutter - slidingSliding - StandardUse: Especially for thin plastics. Sliding right L1 Sliding right Sliding left Art. No. Sliding left

Single helical milling cutter - drawingDrawing - StandardUse: Especially for thick plastics. 3 Drawing left

Straight - StandardUse: Especially for thin plastics.

Sliding - StandardUse: Especially for thin plastics. Art. No. Sliding left

Dual helical milling cutter - drawingDrawing - StandardUse: Especially for thick plastics. Q

Fine toothed Use: Plastic, light metal, non-ferrous materials, FRP

Medium toothed Use: Plastic, light metal, non-ferrous materials, FRP

Medium toothed Use: Plastic, light metal, non-ferrous materials, FRP

Medium toothed Use: Plastic, light metal, non-ferrous materials, FRP Information / Quote request / Order Tel.: +49 82 41 96 08 0 email: info@hg-grimme.de

Forming and multiple-diameter milling cutters These cutters are specially adapted to the requirements of the work pieces to be processed. It is needed a drawing, because it´s no article in stock.

Disk milling cutters with hard metal cuttersDisk milling cutters with hard metal cutters and maximum concentricity, The cutting geometry permits a high standard of cutting quality. Attention: Please observe the maximum permissible tool speed (engraved on each disk). Right cutting

Collet chuck

Information / Quote request / Order Tel.: +49 82 41 96 08 0 email: info@hg-grimme.de

Clamping diameters 6mm, 8mm, 10mm, 12mm, 14mm and 16mm are in stock. Other clamping diameters are on request - not in stock.

Tool cone for spindle Ibag HF60 Clamping pin Information / Quote request / Order Tel.: +49 82 41 96 08 0 email: info@hg-grimme.de

Collet chuck Clamping nut Open-end wrench Information / Quote request / Order Tel.: +49 82 41 96 08 0 email: info@hg-grimme.de - 21 -

Tool holder HSK E25 Tribos S is on request- not in stock. Tool holder HSK E25 Tribos RM is on request - not in stock. Collet cuck Clamping nut Open-end wrench Information / Quote request / Order Tel.: +49 82 41 96 08 0 email: info@hg-grimme.de

Collet chucks for Ibag HF60 / HF80 SKI 16 SKI 20/35 Clamping diameters 6mm, 8mm and 10mm are in stock. Other clamping diameters are on request - not in stock.

Information / Quote request / Order Tel.: +49 82 41 96 08 0 email: info@hg-grimme.de

Tool cone for spindle Ibag HF100 + IMT Classic 100HSK E32 Art. No. 111 291 111 292 111 293 111 294 Tool holder HSK E32 Tribos S Tool holder HSK E32 Tribos S Tool holder HSK E32 Tribos S Tool holder HSK E32 Tribos S Tool holder HSK E32 Tribos S is on request - not in stock. Art. No. 111 295 111 296 111 297 111 298 Tool holder HSK E32 Tribos RM Tool holder HSK E32 Tribos RM Tool holder HSK E32 Tribos RM Tool holder HSK E32 Tribos RM Tool holder HSK E32 Tribos S is on request - not in stock. Art. No.

Tool holder HSK E40 Tribos S Is on request - not in stock. Information / Quote request / Order Tel.: +49 82 41 96 08 0 email: info@hg-grimme.de Tool holder Tool holder Tool holder Tool holder Tool holder HSK E40 Tribos RM HSK E40 Tribos RM HSK E40 Tribos RM HSK E40 Tribos RM HSK E40 Tribos RM Tool holder HSK E40 Tribos RM is on request - not in stock.

DesIgnoT Tool holder HSK 40 F Tribos S Tool holder HSK 40 F Tribos S Tool holder HSK 40 F Tribos S Tool holder HSK 40 F Tribos S Tool holder HSK 40F Tribos S is on request - not in stock. Tool cone HSK 40F ER20 and accessory are on request - not in stock. Tool cone HSK 40F ER25 and accessory are on request - not in stock.

Tool cone HSK C40 ER25 and accessory are on request - not in stock. Torque screwdriver 6 Nm fort Inbus 3 mm Information / Quote request / Order Tel.: +49 82 41 96 08 0 email: info@hg-grimme.de

Collet chucks for Ibag HF100, IMT Classic100, IMT Classic100 Duo 6 16 mm Clamping diameters 6mm, 8mm, 10mm and 12mm are in stock. Collet chucks Type ER25-UP are on request – not in stock. Other clamping diameters are on request – not in stock.

Tool cone HSK 50F ER25 and accessory are on request - not in stock. Tool cone HSK 50F ER32 and accessory are on request - not in stock. Information / Quote request / Order Tel.: +49 82 41 96 08 0 email: info@hg-grimme.de

Tool cone HSK 63F ER25 and accessory are on request - not in stock. Tool cone HSK 63F ER40 and accessory are on request - not in stock.

Collet chucks Type ER25-UP, ER32_UP and ER40-UP are on request - not in stock. Other clamping diameters are on request - not in stock.

Accessories for double spindle Ibag HF90 / Perske Ibag HF90 Thick shaft end Clamping nut Collet chuck