Water Quality Measurement Solutions A Watts Water Technologies Company Micro ISCM Streaming Current Monitor The M icro I SCM establishes a new level of control for plant operators that depend upon Streaming Current to maintain water quality. Unlike other systems, the instrument can be calibrated to a known Ion Charge unit (ICu) value, using a cationic polymer solution. Once calibrated, the operator can use the M icro I SCM to determine the control set-point for the plant. This set-point is established through optimization and it reflects the actual ICu of the sample stream. Standard Features • Graphical Display Quickly view historical trending of ICu readings over an 8 or 24 hour period. • Calibration to a Known Value Maintains accuracy over the life of the probe. • Built-in Diagnostics Full time diagnostic software automatically monitors and detects errors. • On-Screen Instructions Easy to use menus guide the operator through set-up and calibration • User Programmable Offset Simplify human interface by setting the output to reflect zero when optimum • Three Separate Alarm Contacts System alarm and two user-programmable Hi/Low ICu alarms provide continuous confidence in the measuring process. • High / Low Gain Switch Optional Features • Flow Alarm Automatically alerts the operator if there is a disruption in flow to the sensor. • Proportional Integral Controller Automatically controls coagulant dosing. • Serial Ports _ The optional RS-232 or RS-485 serial ports allow the Micro I SCM to easily adapt to a digital environment. Ordering Information All models include 25ft. of interconnecting cable and Calibration Kit. Specifications subject to change without notice. 3170 Metro Parkway, Ft. Myers FL 33916 e-mail: [email protected] ph: (239)-337-2116 • fax: (239) 332-7643 • toll free: 888-203-7248 www.hfscientific.com