Water Quality Measurement Solutions A Watts Water Technologies Company CC^C-Ex OnLine Residual Chlorine Monitor for hazardous environments II The HF scientific cizx:-Ex OnLine Residual Chlorine Monitor is a rugged, safe, and low maintenance instrument for shipboard ballast water treatments systems that require continuous monitoring and control of residual Total Chlorine levels in hazardous environments. User selectable cycle times, 4-20mAand RS-485 with Modbus output that can be used to control feed pumps and a user selectable alarm allows complete manual or automatic control of chlorine dosing. Standard Features Optimized for marine applications Use in atmospheres where combustible fuel vapors may be Housing certified for ATEX, and Zone 1 and Zone 2 Total chlorine Can be used for Total Chlorine measurements Able to operate in ambient temperatures up to 55°C Low reagent use translates into low operating cost Simple operation Designed for unattended operation up to 90 days Cycle times Cycle times can vary between 110 seconds to 10 minutes (optional 60 User selectable alarm for sample concentration Ballast water treatment, Drinking water, Wastewater and more ATEX certified Suitable for Zone 1 and Zone 2 environments USEPA accepted method Ordering Information CLX-Ex OnLine Chlorine Residual Monitor 240VAC for Total Chlorine complete with operating manual. Reagents must be purchased separately. Specifications subject to change without notice. Reagent Kits Catalog number Total Chlorine reagent for CLX-EX 12 month supply (based on estimated BWTS operational cycles) HF scientific 3170 Metro Parkway, Ft. Myers FL 33916 e-mail: [email protected] ph: (239)-337-2116 • fax: (239) 332-7643 • toll free: 888-203-7248 www.hfscientific.com