1. Catalogs
  2. HF scientific
  3. AdvantEDGE Series? Online Measurement Electrodes
video corpo

AdvantEDGE Series? Online Measurement Electrodes

AdvantEDGE Series? Online Measurement Electrodes
1 / 16 PagesView full catalog

AdvantEDGE Series? Online Measurement Electrodes

Product catalog summary
Overview
HF Scientific specializes in water quality measurement, initially focusing on turbidity and expanding to include parameters like residual chlorine and UV% transmission. The AdvantEDGE Series™ aims to reduce costs and improve reliability, covering parameters such as pH, ORP, free chlorine, turbidity, and dissolved oxygen.
AdvantEDGE Series™ Features
The series includes factory pre-calibrated electrodes that can be configured via PLC or computer systems, supporting multiple communication protocols like Modbus RTU, RS-232, and Ethernet IP.
Specifications
  • Measurement System Performance: Range from -2100mV to +2100mV, resolution of 0.1mV, accuracy of 0.1% of reading.
  • Operational Environment: Temperature range from -5°C to 95°C, maximum pressure of 100 psi at 95°C, and maximum flow rate of 10 ft/second.
  • Power Requirements: Voltage range of 10 to 30 VDC, with a maximum power of 200 mW.
AdvantEDGE Sensors
  • pH and ORP Sensors: Offer differential measurement, pre-calibration, and plug-and-play sensor heads for seamless integration with industrial systems.
  • Dissolved Oxygen and Ozone Sensors: Utilize Clark Cell technology, featuring rugged membranes and plug-and-play sensor heads.
  • Optical Dissolved Oxygen Sensor: Uses luminescent technology for accurate measurement, with a range of 0 to 20 mg/L concentration.
  • Contacting Conductivity Sensor: Pre-calibrated for high-resolution measurement, supporting a range of 0 to 2 S/cm.
Measurement System Performance
  • Conductivity Sensors: Range from 0 to 2,000,000 uS/cm with 0.1% accuracy.
  • Free Chlorine Sensors: Measure 0 to 20 ppm with 2% accuracy.
  • Turbidity Sensors: Range from 0 to 4000 NTU with 0.2 NTU accuracy.
Operational Environment
Temperature range for most sensors is -5°C to 50°C, with varying pressure and flow rate specifications.
Power Requirements
Voltage range is 10 to 30 VDC, with typical power consumption of 120 mW.
Construction and Materials
Sensors are constructed from materials like CPVC, PEEK, and stainless steel, with Viton® O-Rings.
Calibration and Configuration
Factory pre-calibrated for conductivity and temperature, with options for sensor and temperature filtering.
Approvals and Ratings
CE certified for immunity and emissions, UL listed for safety and hazardous locations.
LD500 Local Display
Connects to any AdvantEDGE system, displaying sensor and temperature data, with features for calibration and diagnostics.
Accessories and Replacement Parts
Includes mounting options, replacement membranes, and calibration solutions.
See more

Catalog excerpts

AdvantEDGE Series? Online Measurement Electrodes-1

online measurement electrodes Conductivity Turbidity Optical Dissolved Oxygen Dissolved Ozone Dissolved Oxygen Free Chlorine

 Open the catalog to page 1
AdvantEDGE Series? Online Measurement Electrodes-3

For three decades HF scientific has developed specialized expertise in measurements for water quality. Our original involvement in water-quality focused on Turbidity measurement. These products have positioned us as one of the worldwide leaders in Turbidity measurement and monitoring. Over the years our expertise expanded to include devices for monitoring other parameters such as Residual Chlorine, Streaming Current and UV% Transmission. We are now excited to expand our product offering with the addition of our new AdvantEDGE Series™ of measurement electrodes. These electrode systems have been...

 Open the catalog to page 3
AdvantEDGE Series? Online Measurement Electrodes-7

AdvantEDGE series The AdvantEDGE sensor assembly consists of three components designed for direct connection to control systems without the need for intermediate analyzer electronics. A Communications Module plugs into the back of the Interface Module and provides direct interactive communication of measurement, configuration, calibration and diagnostic information with computers and networks. A full family of sensor heads plug into the front of the Interface Module and automatically provides calibrated, high resolution measurements. Communications Adapter Provides power and direct interactive...

 Open the catalog to page 7
AdvantEDGE Series? Online Measurement Electrodes-8

AdvantEDGE pH AdvantEDGE ORP • Differential pH measurement • Pre-calibrated (no field calibration required) • Plug & play sensor heads • Replaceable quad junction salt bridges • Electrode protection options • Direct data reporting • Plug & play industrial communications adapters • Differential ORP measurement • Pre-calibrated (no field calibration required) • Plug & play sensor heads • Replaceable quad junction salt bridges • Electrode protection options • Direct data reporting • Plug & play industrial communications adapters Connect this pH sensor to a PLC for seamless integration with industrial...

 Open the catalog to page 8
AdvantEDGE Series? Online Measurement Electrodes-9

AdvantEDGE Ozone • Clark Cell technology • Pre-calibrated (no field calibration • Plug & play sensor heads • Rugged four resistant membrane Electrode protection options ' • Simple membrane cartridge replacement • Direct data reporting • Plug & play industrial communications Connect this Dissolved Ozone sensor to a PLC for seamless integration with industrial control systems. Use any computer to display data, calibrate and customize the measurement without an intermediate analyzer electronics box. A LD500 local display can be used if desired. Sensor heads are pre-calibrated and can be replaced...

 Open the catalog to page 9
AdvantEDGE Series? Online Measurement Electrodes-10

AdvantEDGE Optical Dissolved Oxygen • Cost Effective Options The AdvantEDGE sensor measures dissolved oxygen (DO) using the principle of "dynamic luminescence quenching."The sensor (Figure 1) uses lifetime-based optical fluorescent The AdvantEDGE sensor uses the latest technology to measure dissolved oxygen (DO) in demanding environments. The AdvantEDGE series™ Optical Dissolved Oxygen RDO® sensor offers several advantages for monitoring DO in process applications: Optical Window Sensing Foil Sensor Type Transmitter/local display Operating temperature Storage conditions, sensor Salinity range...

 Open the catalog to page 10
AdvantEDGE Series? Online Measurement Electrodes-11

AdvantEDGE Contacting Conductivity AdvantEDGE Toroidal Conductivity • High resolution measurement • Pre-calibrated (no field calibration required) • Plug & play sensor heads • 0 to 2 S/cm range • Direct data reporting • Plug & play industrial communications adapters • High resolution measurement • Pre-calibrated (no field calibration required) • Plug & play sensor heads • 0 to 2 S/cm range • Direct data reporting • Plug & play industrial communications adapters Connect this Conductivity sensor to a PLC for seamless integration with industrial control systems. Use any computer to display data,...

 Open the catalog to page 11
AdvantEDGE Series? Online Measurement Electrodes-12

AdvantEDGE Free Chlorine Panel • Free Chlorine • Amperometric Measurement • Temperature Compensated • Plug & Play • Rugged Teflon Membrane • Remote Measurement, Calibration, This Free Chlorine sensor will measure accurately in processes that are between 4 and 8 pH. When used with the LD500 Local Display unit and a pH measurement system, hypochlorous acid (HOCL) and hypochlorite ion (OCL-) concentration can be used to determine free chlorine present. Measurement System Preformance: Accuracy: 2% or +/-10 ppb (whichever is greater) Step Response Time: 90% in 90 seconds Operational Environment: Maximum...

 Open the catalog to page 12
AdvantEDGE Series? Online Measurement Electrodes-13

AdvantEDGE LD500 Local Display AdvantEDGE PA500 Profibus Gateway Functions and Features • • • • • • • • • • PA500 Profibus Gateway Adapter connects up to 30 Modbus Communications Modules to a Profibus DP (V0 or V1) network with M12 connector. Full-featured measurement, calibration, configuration and diagnostics. 24 VDC power. Connects to any AdvantEDGE system. Convenient 1/4 DIN enclosure Display sensor and temperature data Menu Functions: Calibration, Configuration and Diagnostics Digital Protocol Options for remote measurement, calibrations, configurations, and diagnostics. One 4 to 20 mA loop...

 Open the catalog to page 13
AdvantEDGE Series? Online Measurement Electrodes-14

Mounting Options 1.5 Inch Union Mounting 1.5 Inch Ball Mounting Sanity Mount Handrail Mounting Assembly • CPVC (High) • 316 Stainless Steel (High) Mounting with Accessories & Replacements Parts Dissolved Ozone Salt Bridge Replacements PEEK® Protected PEEK® Flat CPVC Protected CPVC Flat Ozone Membrane Ryton Protected Ryton Flat PEEK Protected PEEK Flat with sponge Ozone Solutions ZDOKO: Zero Powder Wash Adapters MH1132: water purge, CPVC Salt Bridge Replacements Dissolved Oxygen Ryton Protected Ryton Flat PEEK Protected PEEK Flat RCS01: Reference cell solution, Wash Adapters MH1132: water purge,...

 Open the catalog to page 14
AdvantEDGE Series? Online Measurement Electrodes-16

HF scientific 3170 Metro Parkway, Ft. Myers FL 33916 • ph: (239)-337-2116 • fax: (239) 332-7643 • Toll Free: 888-203-7248 3-17-2011 Rev 0.7

 Open the catalog to page 16
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.