Heyco® -Tite Solar Masthead® Metal Liquid Tight Cordgrips
Heyco® -Tite Solar Masthead® Metal Liquid Tight Cordgrips
- Break-Thru Skinned-Over glands allow flexibility in using 1 to 31 available holes while maintaining a liquid tight seal.
- Rolled grease-free threads prevent galling and allow for multiple assemblies and disassemblies.
- Approved for NEMA 4, 4X, 6, and 6P applications.
- Self-retaining sealing washers eliminate the need for an O-Ring groove, reducing costs.
- Available in stainless steel for corrosive environments and aluminum for robust environments.
- Suitable for use with USE-2 and PV Cable.
- No disassembly required for installation.
- DFARS Compliant.
- SSMCG: 303 Stainless Body and sealing nut with Nylon 6/6 finger and TPE Gland.
- ALMCG: 6061 Aluminum body and sealing nut with Nylon 6/6 finger and TPE Gland.
- Flammability Rating: 94V-2.
- Temperature Range: -40°F (-40°C) to 212°F (100°C).
- IP Rating: IP 68 (70 PSI, 5 BAR).
Catalog excerpts
“Stay Connected” with Solar Power Components Heyco®-Tite Solar Masthead® Metal Liquid Tight Cordgrips Multi-Hole, NPT Hubs - IP 68 Rated The Ultimate in Liquid Tight Strain Relief Protection GLAND CONFIGURATION Conductors Size No. * AWG 10 and 12 for both USE-2 and PV Cable. ** For 8 AWG USE-2 Wire, use Solar Mastheads for 7,7 mm conductors. Assembled Metal Locknuts INCLUDED. Material SSMCG: 303 Stainless Body and sealing nut with Nylon 6/6 finger and TPE Gland ALMCG: 6061 Aluminum body and sealing nut with Nylon 6/6 finger and TPE Gland Certifications Certified by UL for Compliance with both Canadian and US requirements under File E51579 tWus Recognized under the Component Program of Underwriters' Laboratories File E51579 to both Canadian and US requirements Break-Thru Skinned-Over glands offer flexiblity to use from 1 to 31 of the available holes while still providing a liquid tight seal around the wire. Rolled grease-free threads prevent galling and allow for multiple assemblies and disassemblies. Approved for NEMA 4, 4X, 6 and 6P applications. Self-retaining sealing washers eliminate the need for an O-Ring groove, thus reducing cost. Stainless Steel ideal for corrosive environments. Aluminum a less costly solution for robust environments. Suitable for use with USE-2 and PV Cable. Secure input PV leads from solar panel array strings to fuse holder hookup within solar combiner boxes. No disassembly required for installation. Sealing washer required for through hole applications only. DFARS Compliant.
Open the catalog to page 1All Heyco catalogs and technical brochures
Heyco Catalog343 Pages
Heyco Rivets4 Pages
Heyco's Solar Solutions Brochure20 Pages
Archived catalogs
Heyco® Cable Clamps LabKit1 Page
Heyco® Braided Sleeving1 Page
Heyco® Nylon Arrow Clips1 Page
Heyco® Nylon Push Rivets1 Page
Heyco® Beaded Ties Nylon1 Page
Heyco® Lockit™ Loops1 Page
Heyclip™ Flat Wire Clips1 Page
Heyco® Nylon Hose Clamps1 Page
Heyco® Hole Plugs LabKit1 Page
Heyco® Knock-Out Seals1 Page
Heyco® Rectangular Plugs1 Page
Heyco® Window Plugs1 Page
Heyco® Glossy Plugs1 Page
Heyco® Vent Plugs1 Page
Heyco® Pry Out Plugs2 Pages
Heyco® Shorty Plugs1 Page
Heyco® Insulation Plug1 Page
Heyco® Metric Dome Plugs1 Page
Heyco® Dome Plugs1 Page
Heyco® Bushings LabKit1 Page
Heyco® Shorty Bushings1 Page
Heyco® T-Bar1 Page
Heyco® Metal Locknuts1 Page
Heyco® Nylon Locknuts1 Page
Heyco® PG Threaded Plugs1 Page
Heyco® PG Thread Taps1 Page
Heyco® Sealing Washers1 Page
Heyco® Nylon Locknuts1 Page
Heyco® Metal Locknuts1 Page
Heyco® Louvered Plugs1 Page
Heyco® Snap-In Cordgrips1 Page
Heyco® Snap-In Bumpers1 Page
Heyco® Armor Bushings1 Page
Heyco® Snub Bushings1 Page
Heyco® Snap Bushings1 Page
