Catalogs >
Heyco >
Heyco® Strain Relief Brochure

Heyco® Strain Relief Brochure
8Pages

Catalog excerpts

Strain Relief Assembly Guide

Heyco® Lockit™ Strain Relief Pre-Assembly Equipment Reduce risk of carpal tunnel syndrome! Pre-Assembly Equipment for Heyco Assembly-Friendly Lockit Series Strain Reliefs: RDD Lockits – for “Double D” and Round Mounting Holes. ST Lockits – for Rectangular Mounting Holes. Pre-Assemble Lockits onto cable for faster final assembly! Watch this equipment in action at www.Heyco.com STRAIN RELIEF ASSEMBLY Click on our Strain Relief Bushings Section and then the video “Evolution of the Heyco Strain Relief Bushing” in the upper left most square. A C B A Headlock™ for RDD and ST Lockits Assembly head...

Open the catalog to page 2

Heyco® Lockit™ Strain Relief Pre-Assembly Equipment Directory Catalog page numbers in the chart below refer to our new Heyco Power Components Catalog To use Hand Pliers with Lockit ™ Strain Reliefs: Squeeze Pliers Push into Double D (RDD) Mounting Hole Final Assembly f ST14E guarding meets European standards. Eurolock ST13E and OST3E have a 230V 50/60 Hz rated motor. •Consult Heyco for availability. "Headlock, Footlock or Autolock required due to cable thickness.

Open the catalog to page 3

Heyco® Original Strain Relief Bushing Assembly Pliers Instructions and Spare Parts Part Type Pivot Screw Pliers are shipped set for a 1/4"(6,4 mm) opening. Pliers are shipped set for a 37/64"(14,7 mm) opening. These two Pliers will assemble the majority of our Heyco Original Strain Relief Bushings (see Directory, opposite). If adjustment is necessary, follow B. Close Pliers and lift off Movable Handle (1). C. Move Jaw (2) to desired opening (see Directory, opposite). D. Reassemble Handle (1) in closed position so that the gear teeth engage. E. Open Pliers and replace Spring (6) with short...

Open the catalog to page 4

Heyco® Original Strain Relief Bushing Assembly Pliers Directory Catalog page numbers in the chart below refer to our new Heyco Power Components Catalog For Original Strain Relief Assembly Air Tools, see page 6.

Open the catalog to page 5

Heyco® Original Strain Relief Bushing Air Tool, Air Tool Jaws & Replacement Parts Ordering Procedure for Air Tools: • On the tabular chart, locate the panel mounting hole diameter and Original Strain Relief Bushing that you are using. shown on the same line. most PART NO. columns. • Bench Mount Kit Part No. 0T02 components to convert a hand Air Tool to a bench mounted unit. position on the assembly area work surface. The unit is foot activated, leaving the operator's hands free. See below. • For Original Strain Relief Assembly Pliers, see pages Part No. 0T02 Bench Mount Kit shown installed...

Open the catalog to page 6

Heyco® Snap-In Cordgrip Strain Reliefs Straight-Thru for Round Cables For Panels from .062''(1,6 mm) to .125 "(3,2 mm) Thick The Ultimate in Snap-in Strain Relief Protection Standard color black. 'Consult Heyco. ■ Unique fingers securely lock into a range of panel sizes without use ■ Smooth, rounded interior edges for ■ Limited intrusion into enclosure where access is tight. ■ Rotation prevented when used in "Double D" mounting holes. ■ Easy to install-no tools required. ■ Ratchet design of sealing nut assembly provides superior anti- vibration and ensures a firm grip ■ Available in...

Open the catalog to page 7

Heyco® Lockit™ RDD and ST Strain Relief Bushings UL Approved Round Wire Types Consult Heyco for UL Type designations not shown * UL approved for Cable Diameter Range. ** UL approved for Cable Diameter Range and Type. "Stay Connected with Heyco" Power Components ©Copyright, Heyco Products, Inc., 2011 Heyco® is a registered trademark of Heyco Products, Inc.

Open the catalog to page 8