1-23 1-800-526-4182 • 732-286-1800 (NJ) • FAX: 732-244-8843 • Web site: www.heyco.com Heyco Products, Inc. “ T h e F i r s t N a m e i n W i r e P r o t e c t i o n ” Quick Specs Quick Specs B C D A Material Polyamide Nylon 6/6 Certifications Recognized under Underwriters’ Laboratories File E229161 Approved as per EN50086 Flammability Rating 94V-2 and Low Fire Hazard Including Low Smoke, Low Toxicity as well as Halogen, Sulphur, and Phosphorous Free IP Rating IP 66 standard as per EN60529 IP 66&67&68 available–consult factory and specify FPAX fittings Temperature Rating The temperature rating for all FPA fittings meets or exceeds that for all Flexicon conduit/tubing Flexicon Nylon Conduit Fittings 90° Sweep, Metric Hub For Flexible, Corrugated Nylon Conduit/Tubing FITS PART NO. DESCRIPTION THREAD PART DIMENSIONS CONDUIT SIZE BODY AND SEALING UNIT NOMINAL Black Gray A B C D SIZE Thread Max. O.A. Max. O.A. Clearance Length Diameter Length Hole in. mm. in. mm. in. mm. in. mm. 10 mm F8670 F8671 FPA 10-M12-90 M12x1,5 .315 8,0 .748 19,0 .945 24,0 .473 12,0 13 mm F8672 F8673 FPA 13-M16-90 M16x1,5 .453 11,5 .925 23,5 .366 34,7 .630 16,0 16 mm F8674 F8675 FPA 16-M16-90 M16x1,5 .453 11,5 1.122 28,5 1.476 37,5 .630 16,0 16 mm F8676 F8677 FPA 16-M20-90 M20x1,5 .512 13,0 1.122 28,5 1.476 37,5 .787 20,0 21 mm F8680 F8681 FPA 21-M20-90 M20x1,5 .512 13,0 1.260 32,0 1.555 39,5 .787 20,0 28 mm F8686 F8687 FPA 28-M25-90 M25x1,5 .591 15,0 1.732 44,0 1.988 50,5 .985 25,0 34 mm F8690 F8691 FPA 34-M32-90 M32x1,5 .630 16,0 1.988 50,5 2.303 58,5 1.260 32,0 42 mm F8694 F8695 FPA 42-M50-90 M50x1,5 .630 16,0 2.469 62,7 3.268 83,0 1.969 50,0 54 mm F8696 F8697 FPA 54-M50-90 M50x1,5 .630 16,0 2.992 76,0 3.465 88,0 1.969 50,0 54 mm F8698 F8699 FPA 54-M63-90 M63x1,5 .630 16,0 2.992 76,0 3.465 88,0 2.480 63,0 67 mm F8678 F8679 FPA 67-M63-90 M63x1,5 .630 16,0 3.543 90,0 3.740 95,0 2.480 59,3 Standard color black. Consult Heyco for other colors. • For use with Flexicon corrugated conduit/tubing, See pages 1-15 and 1-16. • Suitable for use with both coarse and/or fine pitch conduit/tubing. • Unitary design and assembly shipment allows fast fit. • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. This feature is not assessed by UL certification or testing. • No threading of the conduit or tubing is required to install. • Locknuts INCLUDED. • Suitable for use by original equipment manufacturers. • Protection class IP 66 per EN 60529 including high pressure water jet from an angle. • Vibration and tamper resistant, but easily removed with a screwdriver. Assembly instructions: Removal instructions: