Pool
15Pages

{{requestButtons}}

Catalog excerpts

Pool - 2

Main reasons to choose SECESPOL pool heat exchangers: High performance Special construction of our heat exchangers boosts heat transfer and delivers better utilization of heat source. Equipped with straight tubes all of the models ensure low pressure loss thus saving energy. Corrugated straight tubes promote turbulent flow which further intensifies heat exchange and helps reducing deposits. Outstanding reliability Cutting-edge technology and durable materials such as titanium, stainless steel and ceramic composite, make our heat exchangers resistant to corrosive environments. They can be...

Open the catalog to page 2
Pool - 3

POOL HEAT EXCHANGERS Swimming pool Heat exchangers HEAT EXCHANGER TYPE B POOL TYPE public pool private pool Olympic-size pool kids' pool hot tubs/ spa pools salt water pool water park HEAT EXCHANGER TYPE HEAT SOURCE TYPE condensing boiler coal boiler geothermal water heat pump solar system district heating best choice

Open the catalog to page 3
Pool - 4

high volume flow at low pressure loss; no need of by-pass compact size corrugated tubes intensify heat exchange and reduce fouling Swimming pool Heat exchangers resistant to aggressive substances in pool water (e.g. fluorine, chlorine) Swimming pool heat exchangers B are shell & tube constructions with excellent heating properties. They offer an ideal solution for installations with high volume flow especially swimming pools and whirlpools. Corrugated tubes boost heat exchange and reduce fouling. Compact welded units are durable and dependable. corrugated tubes of diameter Ø 8 mm / 0.31 in...

Open the catalog to page 4
Pool - 5

Standard location of connections: K1/K4: inlet / outlet heat source - internal thread K3/K2: inlet / outlet pool water - internal thread B HEAT EXCHANGERS MAX. HEAT LOAD HEAT SOURCE TEMP. INLET WORKING PARAMETERS Max. pressure: 16 bar / 232 psi Max. temp.: 203°C / 397°F TECHNICAL PARAMETERS Type pool water

Open the catalog to page 5
Pool - 6

unique 3-pass tube bundle enables better utilization of the heat source and creates exceptional heat exchange results little pressure loss on the shell side (pool water) titanium versions – suitable for salt water pools • The first priority in the process of the REV design was to enhance heat exchange conditions. It was obtained by using 3-pass tube bundle which results in better utilization of heat source. It makes REV excellent to work with heat pumps and solar panels but also with standard heat sources like boilers. corrugated tubes increase flow turbulence which further intensifies heat...

Open the catalog to page 6
Pool - 7

K1/K4: inlet / outlet heat source - external thread G1V2" K3/K2: inlet / outlet pool water - internal thread G1V2" WORKING PARAMETERS Max. pressure: 16 bar / 232 psi Max. temp.: 150°C / 302°F HEAT SOURCE TEMP. INLET pool water heat source S - stainless steel T - titanium

Open the catalog to page 7
Pool - 8

suitable for use with salt water resistant to aggressive substances in pool water (e.g. fluorine, chlorine) high volume flow at low pressure loss; no need of by-pass corrugated tubes intensify heat exchange and reduce fouling Swimming pool Heat exchangers compact size TI is a titanium heat exchanger designed for use in demanding operating conditions especially swimming pools with salt water. Built of titanium the exchanger is resistant to aggressive substances such as salt, chlorine, fluorine as well as high pressure and temperature. Its construction makes the exchanger ideal to work in...

Open the catalog to page 8
Pool - 9

K1/K4: inlet / outlet heat source - external thread G1V2" K3/K2: inlet / outlet pool water - internal thread G1V2" SALT WATER MAX. HEAT LOAD TI HEAT EXCHANGERS HEAT SOURCE TEMP. INLET POOL WATER TEMP. OUTLET TI250 WORKING PARAMETERS Max. pressure: 16 bar / 232 psi Max. temp.: 150°C / 302°F TECHNICAL PARAMETERS Type

Open the catalog to page 9
Pool - 10

suitable for use with salt or treated water low fouling thanks to high quality surface EQ version equipped with pump and regulation Swimming pool Heat exchangers unique ceramic composite technology EVO ceramic heat exchangers deliver high performance in demanding operating conditions especially swimming pools and whirlpool baths with salt water. Ceramic composite used for tubes is one of the most resistant materials which makes it suitable for great number of chemicals, e.g. salt or chlorine. Construction and high quality surface of composite materials ensure long-term durability,...

Open the catalog to page 10
Pool - 11

EVO EQ plug and play set includes: • Grundfos Alpha 2 highly efficient circulation pump integrated directly into the shell • other components for independent work - controller, sensors and wiring SALT WATER EVO HEAT EXCHANGERS MAX. HEAT LOAD MAX. HEAT LOAD HEAT SOURCE TEMP. INLET POOL WATER TEMP. OUTLET HEAT SOURCE TEMP. INLET POOL WATER TEMP. OUTLET

Open the catalog to page 11
Pool - 12

EVO K1/K4: inlet / outlet heat source - internal thread G1" K3/K2: inlet / outlet pool water - plastic union fitting DN50 SALT WATER WORKING PARAMETERS Max. pressure: 3 bar/ 43.5 psi Max. temp.: tube side: 80°C/ 176°F shell side: 60°C/ 140°F EVO EQ K1: inlet heat source - internal thread G1" K5: outlet heat source - external thread G1V2" K3/K2: inlet / outlet pool water - plastic union fitting DN50 TECHNICAL PARAMETERS Type

Open the catalog to page 12
Pool - 13

excellent heat exchange effectiveness applicable in wide range of swimming pool types titanium plates versions – suitable for salt water pools compatible with all types of heating sources • PHE is characterised by excellent heat exchange effectiveness – it is able to heat large volume of water in short time. Additionally, large connection sizes enable high volume flow. flexible design – adaptable to all needs PLATE & FRAME HEAT EXCHANGERS Plate & Frame Heat exchangers dismountable – easy to clean and expand Thanks to its flexible design, PHE can be applied in wide range of swimming pools...

Open the catalog to page 13
Pool - 14

Standard location of connections - single pass: K1/K4: inlet / outlet heat source K3/K2: inlet / outlet pool water Standard location of connections - double pass: D4/K4: inlet / outlet heat source K3/D3: inlet / outlet pool water SALT WATER PLATE & FRAME HEAT EXCHANGERS MAX. HEAT LOAD HEAT SOURCE TEMP. INLET WORKING PARAMETERS Max. pressure: 16 bar / 233 psi Max. temp.: 110°C / 230°F pool water heat source thread thread thread thread thread ports ports ports ports ports

Open the catalog to page 14

All HEXONIC CZ s.r.o. catalogs and technical brochures

  1. HAD

    7 Pages

  2. DNA

    5 Pages

  3. JAD

    13 Pages

  4. BPHE

    17 Pages

  5. JAG SHIELD

    7 Pages

Archived catalogs

  1. Oil Coolers

    11 Pages

  2. Pool

    15 Pages

  3. P-line

    11 Pages

  4. JAD

    15 Pages

  5. HAD

    7 Pages

  6. BPHE

    13 Pages

  7. Dry cooler

    11 Pages

  8. ST

    3 Pages

  9. L-line

    3 Pages

  10. DNA ECO

    1 Pages

  11. R-line

    3 Pages

  12. Luna

    3 Pages

  13. Safe plate

    3 Pages

  14. P-line

    3 Pages

  15. PHE

    3 Pages

  16. L-line

    3 Pages

  17. JAD

    3 Pages

  18. Industrial

    7 Pages

  19. HAD

    3 Pages

  20. DNA

    5 Pages

  21. Custom

    3 Pages

  22. P-line

    3 Pages