HAD shell and coil exchanger is a fully equipped, installation-ready kit consisting of an exchanger, mount and insulation. COMPACT SIZE LARGE HEAT EXCHANGE AREA As a result of advanced design works, HAD has all the benef its of the shell and coil exchangers plus new solutions such as the horizontal position of the connections; it also comes with an insulation and a mount. The new HAD features facilitate mounting it to a horizontal installation and shorten the whole process. Additionally HAD is a perfect solution in terms of economy, ensuring a cost-eff icient solution. RESISTANCE TO HIGH TEMPERATURE...

MADE OF HIGH-ALLOY AUSTENITIC STAINLESS STEEL SHELL COUNTER-CURRENT FLOW DEVICE COIL MADE OF CORRUGATED OR SMOOTH TUBES MOUNT WITH A SMALL FOOTPRINT INSULATION WITH PERFECT PARAMETERS CONSISTS OF TWO PARTS COMBINED WITH FASTENERS , FACILITATING INSTALLATION HORIZONTAL CONNECTIONS FACILITATE INSTALLATION FACTORY-INSTALLED MOUNT

HVAC SYSTEMS STEAM APPLICATIONS HEATING AND COOLING SYSTEMS HEAT TRANSFER IN INDUSTRIAL PROCESSES

STANDARD LOCATION OF CONNECTIONS WORKING PARAMETERS OR CARBON STEEL (CS) K 1 ⁄ K 4   ―  inlet ⁄ outlet hot side K 3 ⁄ K 2   ―  inlet ⁄ outlet cold side Heat exchange area Tube diameter Tube side capacity Shell side capacity

EXEMPLAR DESIGNATION heat exchanger heat exchanger lack of designation means coil made of corrugated tubes, without K – coil made of smooth tubes material group (S for STA or P for PRO) PRO – 316L [17-12-2,5 (1.4404)]; STA – shell 304L [18-10 (1.4307)], tubes 321 [18-10 (1.4541)] * Flanges: EN 1092-1 for PED 2014/68/EU certified hex and ASME B 16.5 for ASME certified hex INSUL AT I ON A MWI MINERAL WOOL INSULATION COVERED WITH ALUMINIUM