PRESET SETPR Ø µ-precision hole measuring instruments overview

Hexacon Messtechnik GmbH specializes in the area of precision hole and chamfer measurement. We manufacture high-precision hole measuring heads according to your individual diameter specifications. Applications range from manual measurement to fully automated measurement. We also offer an extensive line of system accessories. The repeat accuracy of our hole measuring heads at IT 8 is < 1µ. 100% Made in Germany All Hexacon PMK precision measuring heads and chamfer measuring heads, chamfer probes and insertion measuring instruments are tough, reliable, high-precision metrology equipment made 100%...

Hole measuring instruments Functional principle PMK • Precision hole measuring heads • TiN coated PMK precision meas. heads • Functional description PMK measuring heads are used for the reliable, rapid precision measurement of diameters and form errors in holes of a wide variety of types. The purely mechanical measurement principle uses hardened metal measuring points to probe the hole, then guide the force through measurement rods into the housing onto a hardened, conically ground drive needle. For quality assurance in fabrication and in testing. Dial gauge A measurement gauge holder, with or...

2-point hole measuring heads PMK • Precision hole measuring heads • TiN coated Measurement of through holes and blind holes. Diamond measuring points, PMK-NO and PMK-XK upon request. with insertion groove Overall catalog • Page 12 PMK • 2-point precision measuring heads With insertion groove. Self-centering. ø 10-280 mm, available with: Standard X dim., short X dimension or blind hole X dimension. M6x0.75 mm or M10x1 mm threads. Measuring range 0.15 mm and up, extensible. Repeat accuracy at IT 8 < 1µ. with insertion chamfer Insertion chamfer for automated measuring Overall catalog • Page 18 Prevents...

2-point and 3-point PMK precision hole measuring heads with normal X dimension, short X dim. or blind hole X dim. 2-point measuring heads measure precision diameters as well as ovality and conicity of the hole by rotating during the measuring process. 3-point measuring heads also measure polygonal deformations of the hole. The repeat accuracy of our 2-point and 3-point measuring heads at IT 8 is < 1µ. All Hexacon PMK are manufactured of high-quality tool-grade steel and treated at no extra charge with a quality-improving titanium nitride coating. TiN coating provides very good hardness, about...

2-point hole measuring heads B2 PMK • Precision parallel measuring heads • TiN coated Measurement of through holes and blind holes. Diamond measuring points, PMK-NO upon request. Overall catalog • Page 38 PMK-02-PAQ • 2-point precision meas. heads ø 8-15 mm, available with: Standard X dim., short X dimension or blind hole X dimension. Self-centering. M6x0.75 mm thread. Measuring range 0.15 mm and up, extensible. Overall catalog • Page 39 PMK-03-PAQ • 2-point precision meas. heads ø 15-40 mm, available with: Standard X dim., short X dimension or blind hole X dimension. Self-centering. M10x1 mm...

2-point PMK-PA parallel hole measuring head with normal X dimension, short X dimension or blind hole X dimension, titanium nitride coated, precisely measure the parallelism of two surfaces. The repeat accuracy of our 2-point measuring heads at IT 8 is < Ip. All Hexacon PMK are manufactured of high-quality tool-grade steel and treated at no extra charge with a quality-improving titanium nitride coating. TiN coating provides very good hardness, about 2200 HV, as well as corrosion resistance with very good sliding and friction characteristics. The improved service life results in high cost-effectiveness...

PMK * Precision measuring heads * TiN coated Measuring heads in different variants. ^PM3EM Outer measuring head^) : Overall catalog • Page 48 ; Self-centering. 0 8-15 mm, delivered with: X dimension of 5 mm. M6x0.75 mm thread. PMK-03-AM • Outer measuring head Self-centering. 0 15 mm and up, delivered with: X dimension of 5 mm. M10x1 mm thread. Measuring range 0.2 mm, extensible. Repeat accuracy at IT 8 < 1p. Conical measuring head Overall catalog • Page 50 ; PMK-KE • Precision conical measuring head Self-centering. 0 8 mm and up, delivered with: Standard X dimension. M6x0.75 mm or M10x1 mm thread....

Overall catalog • Page 54 Multi-point meas. heads Repeat accuracy < 1µ Multi-point meas. heads PMK-ME • Multi-point precision meas. heads Are delivered with integrated holder for inductive measuring probes with Ø 8H7 mm. Integrated depth stop can be implemented for example using the housing geometry. Threaded connection for handle M35x1.5 mm or M40x1.5 mm. You can find more details and information about our precision measuring heads and chamfer measuring instruments as well as an extensive range of system accessories in our overall catalog. Similarly, modifications of our standard measuring heads...

Dial gauge holders • Extensions Dial gauge holders, depth extensions and depth stops PMK system accessories in modular system. Depth stop • Clamping rings P. 78 Dial gauge holder for PMK modular system Dial gauge holder Overall catalog • Page 60 Dial gauge holder for PMK measuring heads Dial gauge holder with shaft Ø 8mm H7. With M6x0.75 mm or M10x1 mm threads. Short variant 32 mm in length and up. Normal variant up to 150 mm in length. Holder for inductive measuring probes · Page 65 Depth stop TA-03 Page 80 Example combination: TA-03 depth stop (Catalog page 80) can be clamped on the HM-03-150...

Extensions • Depth stops For automated meas. centering holders work with our special PMK-EF measuring heads with insertion chamfer. For example, adjustable depth stops can easily be clamped onto extensions to measure at defined depths. Angle extensions can be combined with dial gauge holders and depth extensions to form practical manual measuring instruments for hard-to-reach areas. In combination with the GS device stand and the TA-03 depth stop, the same components can be used for measurement applications for small workpieces. PMK system accessories in modular system. The dial gauge holders,...