- Catalogs
- Hetronic, Inc.
- RX-ES-CAN-HL-DT
RX-ES-CAN-HL-DT
RX-ES-CAN-HL-DT
Hetronic is committed to creating safer workplaces through innovative remote control solutions. The RX-ES-CAN-HL-DT receiver is a testament to this commitment, offering a compact and sturdy design built to withstand harsh environments.
Specifications
- Design: Compact, lightweight, and impact-resistant polymer composite housing.
- Frequency Range: Operates between 2.405-2.485GHz (FHSS).
- Dimensions: 134mm x 118mm x 34mm (5.27” x 4.64” x 1.33”).
- Weight: Maximum 0.9Kg (2.3Lbs).
- Environmental Protection: Certified at IP65, exceeding Nema 12/13 standards.
- Operating Range: Over 250m for frequencies below 1GHz and approximately 100m for frequencies above 2GHz.
- Temperature Range: Operating temperature from -30°C to +80°C (-22°F to +176°F) and storage temperature from -40°C to +85°C (-40°F to +185°F).
- Power Output: Varies by frequency, with up to 100mW for 2.4GHz.
- Humidity Range: 0 to 97% max, non-condensing.
- CAN Protocols: Supports CANOpen, CANOpen Safety, J1939, J1939-76, Generic, Parker IQAN.
- Power Supply: 12/24Vdc with reverse and over-voltage protection.
Features
- Optional 3-axis accelerometer with 3.9mg resolution.
- Solid State AUX output rated at 750mA.
- Real-Time Clock with coin battery backup and RTC datalogging.
- Optional 5 external status LEDs.
Electrical Interfaces
- 2x CAN with up to 8Mb/s for CAN-FD.
- Supply, GND, 1x N.O AUTX Output, 2x STOP (4-wire).
Compliance
Complies with Cat 3, PLe STOP according to DIN ISO 13849 and EN62745, CE, FCC, IC, with other approvals available on demand.
About Hetronic
Since 1982, Hetronic has been a leader in industrial safety radio remote control solutions, delivering over 500,000 transmitter/receiver solutions globally. Their extensive network in over 50 countries ensures expert service and support.
Catalog excerpts
COMPACT AND STURDY WITH UNQUESTIONABLE SAFETY THAT IS BUILD TO LAST The RX-ES-CAN-HL-DT receiver is designed to meet Hetronic's customer needs. With a compact, lightweight and built to withstand extreme and harsh environments, the RX-ES-CAN-HL-DT receiver is certified at IP65. Tailored to operate at different frequencies ranging from 2.4GHz. The RX-ES-CAN-HL-DT is designed to meet the customer different needs and wide range of application. Contact a Hetronic technical expert for more information & to discuss your specific application. A METHODE ELECTRONICS COMPANY
Open the catalog to page 1
RX ES-CAN-HL-DT SPECIFICATIONS HOUSING • Impact Resistant • Polymer Composite FREQUENCY RANGE • Internal (* external on request) ANTENNA CONNECTOR ENVIRONMENTAL PROTECTION OPERATING RANGE (TYPICAL LINE OF SIGHT, VARIES WITH RF POWER) OPERATING TEMPERATURE/ STORAGE TEMPERATURE STANDARD POWER RF OUTPUT EIRP (50 OHM) (SUBJECT TO COUNTRY LEGISLATION) HUMIDITY RANGE • CANOpen, CANOPen Safety, J1939, J1939-76, Generic, Parker IQAN POWER SUPPLY • 12/24Vdc +/-50% (Reverse and OverVoltage Protected) • Standby current @ 12V:75mA • Optional 3-axis accellerometer (Res.3.9mg) • Solid State AUX output rated...
Open the catalog to page 2All Hetronic, Inc. catalogs and technical brochures
NOVA C2 Pages
ERGO S2 Pages
RX 14-HL-M2 Pages
RX MFSHL AC8/162 Pages
Archived catalogs
ERGO F nd GENERATION2 Pages
H-TOUCH2 Pages
- Wireless remote control
- Industrial remote control
- Remote control with buttons
- IP65 remote control
- Crane remote control
- Radio receiver
- Joystick remote control
- Safety remote control
- Compact remote control
- Rechargeable remote control
- Remote control receiver
- Lithium remote control
- Compact receiver
- Rugged remote control
- Industrial receiver
- Remote control with toggle switch
- Rugged receiver
- Remote control with integrated display
- Serial receiver
- Overhead crane remote control