Extrusion Blow Moulding Machine HV180 E / HV200 E Single station blow moulder with horizontal linear mould shuttle and vertical extruder all-electrical driven-Version Centre Distances: Cooling Requirement • Extruder System • Blow Mold Platen daylight Clamping Force Dry Cycle Energy Requirements • Electromotor Extruder • Electrical Drives for 27kN • Heating Capacity Extruder • Electric Control, approx. • Total Connected Load, approx. • Air Requirement, approx. • Air Working Pressure Linear mould Stroke Mould Width Mould Length Mould Thickness Opening Stroke Extruder • Drive Elektromotor, Infinitely Variable • Screw Speed • Screw 2 fold 3 fold 4 fold • Modification reserved; • Standard voltage: 3 x 380V, 50 Hz • Alternative centre distances possible; • Please ask for additional equipment. The effective consumption data for Energy- and cooling requirements are product dependent. The Air requirement is an approximate value, he can change according to produced article. We reserve the right to change technical specifications without prior notice. German Quality since 1948