- Catalogs
- Hesta Blasformtechnik GmbH & Co. KG
- HMD310 / HMD360
HMD310 / HMD360
HMD310 / HMD360
- Mould Dimensions: The linear mould stroke is 310 mm for HMD310 and 360 mm for HMD360. Mould width is 300 mm and 350 mm, respectively, with a length of 340 mm (extendable to 370 mm). Mould thickness ranges from 2x75 to 2x90 mm.
- Clamping Force: HMD310 offers a clamping force of 40 kN, while HMD360 provides 60 kN.
- Cycle Time: The dry cycle time is 1.6 seconds for HMD310 and 1.8 seconds for HMD360.
- Centre Distances: Various configurations are available, such as 2x2 fold (100/110/(125) mm) and 2x6 fold (50 mm).
- Extruder Diameters: Options include ø50, ø55, ø60, and ø70 mm.
- Drive: Electromotor with infinitely variable speed, ranging from 0 to 85 min¯¹ for ø50 and ø55, and 0 to 80 min¯¹ for ø60 and ø70.
- Electromotor Hydraulic: 11 kW for all models.
- Electromotor Extruder: Ranges from 17 kW to 30 kW depending on the extruder size.
- Heating Capacity: Varies from 12 kW to 24 kW.
- Total Connected Load: Approximately 41 kW to 66 kW.
- Air Requirement: Approximately 1000 to 1200 Nl/min with a working pressure of 7 to 10 bar.
- Cooling Requirement: Hydraulic system requires 14,000 to 23,000 kJ/h, and blow mold requires 22,000 to 38,000 kJ/h.
Catalog excerpts
German Quality since 1948 Extrusion Blow Moulding Machine HMD310 / HMD360 Double station blow moulder with horizontal linear mould shuttle Hybrid-Version Linear mould Stroke Mould Width Mould Length Mould Thickness Opening Stroke Platen daylight Clamping Force Dry Cycle Centre Distances: Energy Requirements • Electromotor Hydraulic • Electromotor Extruder • Heating Capacity Extruder • Electric Control, approx. • Total Connected Load, approx. • Air Requirement, approx. • Air Working Pressure Cooling Requirement • Hydraulic System • Blow Mold • Modification reserved; • Standard voltage: 3 x 380V, 50 Hz • Alternative centre distances possible; • Please ask for additional equipment. The effective consumption data for Energy- and cooling requirements are product dependent. The Air requirement is an approximate value, he can change according to produced article. We reserve the right to change technical specifications without prior notice. Extruder • Drive Electromotor, infinitely variable • Screw Speed • Screw 2x2 fold 2x3 fold 2x4 fold 2x5 fold 2x6 fold
Open the catalog to page 1All Hesta Blasformtechnik GmbH & Co. KG catalogs and technical brochures
HFD4901 Page
HG360E / HG460E1 Page
HG360 / HG4601 Page
HM310E / HM360E1 Page
HM310 / HM3601 Page
HV180E / HV200E1 Page
HV180 / HV2009 Pages
HM-series3 Pages