Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Hesta Blasformtechnik GmbH & Co. KG
  3. HM310E / HM360E

HM310E / HM360E

HM310E / HM360E
1 / 1 PageView full catalog

HM310E / HM360E

Product catalog summary
Overview: The document provides technical specifications for the HM310 E and HM360 E extrusion blow moulding machines by HESTA Blasformtechnik GmbH & Co. KG. These machines are single station blow moulders with a horizontal linear mould shuttle and are all-electrically driven.
Specifications:
  • Mould Dimensions: The linear mould stroke is 310 mm for HM310 E and 360 mm for HM360 E. Both have a mould width of 330 mm and 380 mm, respectively, and a mould length of 340 mm. The mould thickness is specified as 2x90 ± 3 mm for both models.
  • Clamping and Cycle: Both machines have a clamping force of 60 kN and an opening stroke of 155 mm. The dry cycle time is 1.4 seconds for HM310 E and 1.6 seconds for HM360 E.
  • Centre Distances: Various fold options are available with specific centre distances, such as 2 fold (100/110/(125) mm), 3 fold (70/85 mm), 4 fold (50/60 mm), and 5 fold (50 mm).
  • Extruder Specifications: The extruder diameters range from 50 mm to 70 mm, with screw speeds of 0 to 85 min¯¹ for smaller diameters and 0 to 80 min¯¹ for larger ones. The screw dimensions are specified as 50/22 D, 55/22 D, 60/22 D, and 70/22 D.
Energy and Cooling Requirements:
  • Electrical Drives: Require 7 kW for 40 kN.
  • Extruder Power: Ranges from 17 kW to 30 kW depending on the extruder size.
  • Heating Capacity: Varies from 12 kW to 24 kW.
  • Total Connected Load: Approximately 38 kW to 63 kW.
  • Air and Cooling: Air requirement is approximately 500/600 Nl/min with a working pressure of 7-10 bar. Cooling requirements for the extruder range from 8,000 kJ/h to 12,000 kJ/h, and for the blow mold from 22,000 kJ/h to 38,000 kJ/h.
Additional Information: The document notes that effective consumption data for energy and cooling requirements are product-dependent, and air requirements may vary based on the produced article. Technical specifications are subject to change without prior notice. Standard voltage is 3 x 380V, 50 Hz, with alternative centre distances available upon request.
Contact Information: HESTA Blasformtechnik GmbH & Co. KG, Jahnstraße 84, D-73037 Göppingen, Phone: +49 (0) 71 61 / 504 67 - 0, Fax: +49 (0) 71 61 / 504 67 - 29, Email: [email protected], Website: www.hesta.de
See more

Catalog excerpts

HM310E / HM360E-1

Extrusion Blow Moulding Machine HM310 E / HM360 E Single station blow moulder with horizontal linear mould shuttle all-electrical driven-Version Linear mould Stroke A Clamping Force Centre Distances: German Quality since 1948 • Drive Electromotor, infinitely variable Energy Requirements • Heating Capacity Extruder kW 12 14 17 24 • Electric Control, approx. kW 2 2 2 2 • Total Connected Load, approx. kW 38 42 53 63 Cooling Requirement • Modification reserved; • Alternative centre distances possible; • Please ask for additional equipment. HESTA Blasformtechnik GmbH & Co. KG The effective consumption data for Energy- and cooling requirements value, he can change according to produced article.

 Open the catalog to page 1

All Hesta Blasformtechnik GmbH & Co. KG catalogs and technical brochures

  1. HFD490
    HFD490

    1  Page

  2. HG360E / HG460E
    HG360E / HG460E

    1  Page

  3. HG360 / HG460
    HG360 / HG460

    1  Page

  4. HMD310 / HMD360
    HMD310 / HMD360

    1  Page

  5. HM310 / HM360
    HM310 / HM360

    1  Page

  6. HV180E / HV200E
    HV180E / HV200E

    1  Page

  7. HV180 / HV200
    HV180 / HV200

    9  Pages

  8. HM-series
    HM-series

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.